How long should it take to burn a 4.2GB DVD at 8xspeed

[pharries]

I am confused by something really simple.
With the right driv, firmware and decent appropriate media how long in minutes + seconds should it take to burn a 4.2GB DVD at 8xspeed?

[ZippyP.]

7-8 minutes.

[FulciLives]

I concur !

[pharries]

So What is it actually 8x?
with Cds we knew what time was baseline and so 8x
with DVDs not so it appears

[BobK]

So What is it actually 8x?
with Cds we knew what time was baseline and so 8x
with DVDs not so it appears

For video:

1X- one hour of video (at a bitrate that will fill the disk- since a disk will also hold any length of video up to 8 hours or more if the bit rate is lowered)- burn time about 1 hour.

2X- burn time about 1/2 hour (or twice as fast as 1X)

4X- burn time about 15 minutes (1/2 as long as 2X)

8X- burn time about 7-8 minutes (1/2 as long as 4X)

[jimmalenko]

So What is it actually 8x?
with Cds we knew what time was baseline and so 8x
with DVDs not so it appears

https://www.videohelp.com/dvd#dvdspeeds

Single Layer(4.7GB) write speeds
1x (CLV) = about 58 minutes
2x (CLV) = about 29 minutes
2.4x (CLV) = about 24 minutes
4x (CLV) = about 14.5 minutes
6x (CLV/ZCLV) = about 10-12 minutes
8x (PCAV/ZCLV) = about 8-10 minutes
12x (PCAV/ZCLV) = about 6.5-7.5 minutes
16x (CAV/ZCLV) = about 6-7 minutes

Dual/Double Layer(8.5GB) write speeds
1x CLV = about 105 minutes
2.4x CLV = about 44 minutes
4x CLV = about 27 minutes

[whitejremiah]

honestly though, even if your media is rated at 8x speed, id still advise against burning at that speed...i burn all my stuff at 4x, if you go much higher than that it may cause problems with some dvd players.....if your burning on a 16x recorder with 16x media though, 8x should be fine

[pinetop]

How old is your computer ?

I have an old laptop, PentiumII, it takes 15 minutes with the usb 2.0 port and 2 hrs with the usb 1.1 port.

[pharries]

Thanks guys