VideoHelp Forum




+ Reply to Thread
Page 2 of 2
FirstFirst 1 2
Results 31 to 46 of 46
  1. Member
    Join Date
    Oct 2000
    Location
    United States
    Search Comp PM
    You might also be dyslexic.
    I don't have a bad attitude...
    Life has a bad attitude!
    Quote Quote  
  2. Always Watching guns1inger's Avatar
    Join Date
    Apr 2004
    Location
    Miskatonic U
    Search Comp PM
    Fandim - there is nothing weird about wanting the best picture quality. Weird is people who never use either because all they want is speed. You might as well stick with VHS if you're happy with lower picture quality.
    Read my blog here.
    Quote Quote  
  3. Originally Posted by Fandim
    Maybe I'm wierd, but I ALWAYS use deep analysis and "sharp" (move it to smooth if compression is beyond 65%, though). Even for 90%. <shrug>
    I do the same. Never had a movie take longer than 90 minutes, though.
    Quote Quote  
  4. Might as well be contrarian here. If it's just a few percent, I'll shrink it without DA or AEC. If significant compression is required, run it through DVDRebuilder. Doesn't take all that much longer than DVDShrink with DA and AEC enabled. So re the original question, no I don't see much point to it.
    Pull! Bang! Darn!
    Quote Quote  
  5. Always Watching guns1inger's Avatar
    Join Date
    Apr 2004
    Location
    Miskatonic U
    Search Comp PM
    Even with both turned on, Shrink takes about 25% of the time of rebuilder for the same file. If Shrink is taking that long there is definately something wrong with your setup.
    Read my blog here.
    Quote Quote  
  6. Originally Posted by guns1inger
    Even with both turned on, Shrink takes about 25% of the time of rebuilder for the same file. If Shrink is taking that long there is definately something wrong with your setup.
    Well, it's subjective, as well as depending on number of passes. For me, DVDRB (CCE) takes about 1.4x realtime for two passes, so less than 3 hours for a two hour movie. (On reflection, I suppose I should add ripping time to that, which does make the comparison closer to the 25% figure you suggest).

    But it's difficult for me to see more than a slight improvement using DA and AEC. Particularly if the ratio is at 90% or above. That's on a 32" HDTV CRT. DVDRB results in a noticeable improvement over DVDShrink (with or without DA and AEC) when the compression required is greater than that. So my attitude is, if it's worth extra time, it's worth re-encoding. To each his own. JMO.
    Pull! Bang! Darn!
    Quote Quote  
  7. Member
    Join Date
    Feb 2004
    Location
    Virginia
    Search Comp PM
    gunslinger wrote:

    Actually, unless the disk is 4:3 letterboxed, most of the screen is video. If your disk is "widescreen enhanced", "16:9", "Anamorphic" etc, then your player is adding the black bars by compressing the image. There is as much data on a 16:9 1.78:1 movie as there is on a 4:3 fullscreen disk. Even a 16:9 disk with a 2.35:1 AR movie fills better than 50% of the screen area with movie.
    I agree, I just checked my Harry Potter video (wide screen version) and it was letter boxed (720x480 with 25% of the screen black). I grabbed a frame and looked at it with a graphics program. Some of my other videos are true 16:9's (864x486 with all video). If your video player is also "letter boxing" your true 16:9' videos, then shrinking is also throwing away some of the bandwidth that you can't see. You will see the loss in bandwidth if viewed on your computer monitor or a HDTV. Just one more thing to consider when shrinking.
    Quote Quote  
  8. Even with both turned on, Shrink takes about 25% of the time of rebuilder for the same file. If Shrink is taking that long there is definately something wrong with your setup.
    That is not true... in any computer... running DVD Rebuilder + CCE Basic it can take more 15/30 minutes than Shrink with deep analysis... and the Quality of the final result?... well I don't even compare... and don't come and tell me about percentages 'cause 60% of 9000 is not tha same as 60% of 4000, is it?
    My oppinions may change, but not the fact that I am right!

    www.rockassoftware.pt.vu

    DAudioK => https://forum.videohelp.com/viewtopic.php?t=306886

    DVD Rebuilder
    http://dvd-rb.dvd2go.org
    http://www.jdobbs.com
    Quote Quote  
  9. I use Deep Analysis and AEC Sharp if compression required is more than 97%. I'm not seeing any more artifacts than the originals on my high end equipment.

    I used to use CCE a few years ago, but recent versions of Shrink do great even at 70% comopression, and rarely does something need compressed more, so I dont waste my time firing up CCE anymore. In recent comparisons, I determined Shrink was better.

    Tip - get rid of the crap, menus, extras, etc. Enjoy.
    Quote Quote  
  10. Tip - get rid of the crap, menus, extras, etc. Enjoy.
    Yes... that's a good solution... oh! by the way... why bother to submit yourself to ripping problems... just "record" the main movie into a VHS tape
    My oppinions may change, but not the fact that I am right!

    www.rockassoftware.pt.vu

    DAudioK => https://forum.videohelp.com/viewtopic.php?t=306886

    DVD Rebuilder
    http://dvd-rb.dvd2go.org
    http://www.jdobbs.com
    Quote Quote  
  11. Member shelbyGT's Avatar
    Join Date
    Oct 2003
    Location
    Kansas City, KS
    Search Comp PM
    Originally Posted by Rockas
    Tip - get rid of the crap, menus, extras, etc. Enjoy.
    Hey, it's what I do. If I want the extras I'll put in the original, not the backup.
    Quote Quote  
  12. Video Restorer lordsmurf's Avatar
    Join Date
    Jun 2003
    Location
    dFAQ.us/lordsmurf
    Search Comp PM
    Originally Posted by jimmalenko
    That's like trying to rake diarrhea up a hill ...
    LMAO! That's a good one!
    Want my help? Ask here! (not via PM!)
    FAQs: Best Blank DiscsBest TBCsBest VCRs for captureRestore VHS
    Quote Quote  
  13. VH Veteran jimmalenko's Avatar
    Join Date
    Aug 2003
    Location
    Down under
    Search PM
    Originally Posted by lordsmurf
    Originally Posted by jimmalenko
    That's like trying to rake diarrhea up a hill ...
    LMAO! That's a good one!
    Remember the 80's and the "What's a definition of ..." jokes ?

    I think that was the definition of impossible.


    PM me to hear my all-time favorite - I initially posted it here, but it is of a sexual nature and may offend, so I've removed it.
    If in doubt, Google it.
    Quote Quote  
  14. I've got to say, it used to take 3+hrs on my old 1.4ghz amd with dvd shrink!

    with my new amd 2.4ghz with all the whistles (sort of) pc 3200ram yadda yadda it takes an hour or maybe 1.5 depending on the movie. We're talking saving private ryan or s0pranos season 5 so its definitely a heavy load not like 10% compression.

    maybe you should look at your hardware? celeron may not be good at crunching those type of #s.
    Quote Quote  
  15. From my experience, using the deep analysis is definitelly worth the time. I had some discs that I did using the default settings, and in some scenes, when the shots changed back and forth, there would be bad macroblocking for a couple of frames (definitelly noticeable). When I redid them with the deep analysis and the default sharpness setting, the problem went away and the video looked better overall.

    It takes me about 90 minutes on a 2.4GHz computer (my secondary system). For me, I'm willing to wait the extra time for the quality boost.
    Quote Quote  
  16. I never used it...........dont see no reason to start if I'm happy right?
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!