Does anyone have an specific preferences for HR-S9911 settings when making a digital copy of an old VHS tape
S-VHS ET : ON - OFF
VIDEO CALIBRATION : ON - OFF
DIGITAL R3 : ON - OFF
VIDEO STABILIZER : ON - OFF
S-VHS MODE : ON - OFF
The HR-S9911U is the source, ie; my setup is as follows:
HR-S9911U -- TBC-1000 -- DSR-11
+ Reply to Thread
Results 1 to 5 of 5
ET is for recording SVHS on VHS tape
Only do that if using good tapes (like TDK EHG)
Calibraion ON, controlled by MODE.
I use AUTO most time. SOFT can remove noise
Leave on EDIT to record.
Stabilizer cannot coexist with TBC.
Not often needed, actually.
Off during recording.
S-VHS, again, for S-VHS recording (or ET)
DNR/TNC .. on
one addt'l comment would be that sometimes I find the stabilizer helps ... maybe not often, but if you feel like it, watch a few mins w/ the tbc/dnr and the same few w/ the stabilizer and see which you like better"As you ramble on through life, brother, whatever be your goal - keep your eye upon the doughnut and not upon the hole."
This is good stuff.