PRODISC R03 + W.I. Hub Printable scans W/Diff. Burners

[Noahtuck]

I did some scan's on these disc's after being burned with a LITE-ON SOHW-812S
These are pretty much waht all the scan's came out like.



Now here are the same disc's burned with a NEC ND-3520A



All burned at 8X

+R White Inkjet Hub Printable PRODISC R03

[steve2713]

Awesome result. Despite a specific someone on this site saying most Prodisc problems were caused by NEC drives, this once again proves he's full of it.

[Noahtuck]

Awesome result. Despite a specific someone on this site saying most Prodisc problems were caused by NEC drives, this once again proves he's full of it.

Yep, damn it!!!! what ami gonna do with all these sticky labels now
:P

Here is another scan at 8X


here is one at 12X


I think i'll stick to the 8X burns on these prodisc, gonna try a 6X burn also.

[Gen-An]

Someone over at CDFreaks said he ordered Prodisc 8x DVD+R and got MCC003: http://club.cdfreaks.com/showpost.php?p=873794&postcount=18

[johns0]

I burned those same r03 with mixed results using both a nec 3500 and liteon 812,some discs burned great with both burners and most burned like crap with both burners with the mountain buildup at the end of the burn.

[Noahtuck]

Someone over at CDFreaks said he ordered Prodisc 8x DVD+R and got MCC003: http://club.cdfreaks.com/showpost.php?p=873794&postcount=18

He does not say if they are printable or not,
These are inkjet hub printable.

[Noahtuck]

I burned those same r03 with mixed results using both a nec 3500 and liteon 812,some discs burned great with both burners and most burned like crap with both burners with the mountain buildup at the end of the burn.

Yep, i was consistantly getting the end of disc problem on my liteon, but i have already burned quite a few on my new NEC and everyone has come out almost exactly the same as i have posted... if i hit any bad one's i will post them here with these...
NEC ND-3520A
LITEON SOHW-812S
I just applied the firmware that auto sets the booktype to "rom" and they are still giving the same results as before.... Still looking good....

[dmagic1]

Where did you get these?