Yes....6 hoursOriginally Posted by lordsmurf
+ Reply to Thread
Results 31 to 49 of 49
-
Hi InnocentCat;
You can't reclaim deleted space the way you want to with the R04. Sorry, just a fact of life. I would also caution against deleting part of the programs on a disc and then continue recording on the disc, I have had problems doing that on my LiteOn 5001. The R04 might not have the same problem, but I wouldn't chance it if I were you. The way I now record is to fill up a +RW, even if one show is a rerun or something else I don't want to keep, and after the disc is full, I transfer the shows to my PC hard drive for editing and final re-authoring. I then erase the entire +RW for reuse.Proud Member of the Unofficial LiteOn/iLO Beta Testers Club. -
I purchased my first Ilo recorder on Sunday. When I hooked it up I repeatedly hung. I would have to hold down the power button to get it to reset. Sometimes it would work for an hour or so and other times only about 2 minutes. I took it back and got another one and it works fine.
However I am experiencing a small problem with this one. It records just fine and the quality is great with the exception of the first 3 or 4 rows of pixels at the top of the screen. They are a flickering whiteness that causes a major distraction when watching a show. Is there someway to make this go away?
Thanks,
Bryan -
I have updated mine with the latest hacked firmware and it works great. no mv and 3 hour mode.
-
Alright I tired it and it does work great. Thanks for posting it to share with everyone.
-
Is it possible to title each chapter on the iLO? Or, do you have to stop and restart each recording session on the same DVD+R? Or, can you just pause the recording?
No problem with MV yet. But if it happens, how do I install the firmware hack? Do I just download and burn to a CD and play the CD on the iLO?
Thanks for any help. I'm new to all this.Have you heard the news, there's good rockin' tonight. -
Originally Posted by etcallhome
Yes, just burn the hack to cd and pop it in the Ilo. Instructions will happen onscreen.
The hack, I used 1097, works like a charm. -
Whats the difference in the WMEA1097.E20 and WMEA1097.E30 ? I already flashed mine with your .E20 one should I try the other one?
-
The different firmware are for different burners in the units. You can tell by the firmware number on your machine.
serial number 4E01-184x-xxxx-G2Bx
451S Drive.
serial number 4E01-184x-xxxx-B20x
813S Drive. -
Here is another 'glitch' I found with my Ilo DVD-R04 recorder. I had the unit set up on the timer to record 4 1-hour shows on a blank DVD-RW (set up for 6 hr mode). After the 2nd show finished recording it started the 3rd but only went for about 30 seconds then it shut off. I had to manually start the recording quickly. Any clues on this one ??
-
Please visit my ILO DVDR04/HD04 Firmware site for the latest firmware upgrades for the DVDR04 recorder.
The site includes the latest firmware for the DVDR04, hacked to include LP 3-hour mode and disable MacroVision. -
Just got back to this forum after Near Year's holiday. Thanks for the info on editing and hacks. I did a recording off a digital cable channel and no problems with MV. I'll wait and see if I come across a source that sets off a false MV before I try any hacks.
Have you heard the news, there's good rockin' tonight. -
QUESTION: Can this ilo DVDR04 be used with a older TV so my wife can record her soaps.... I was just wondering what the connections would be, such as TV cable & etc... does it connect just like a VCR ????????
-
Originally Posted by geno52
If the TV's only inputs are for RF signals (antenna/cable), either the coaxial 75-ohm F-type connector or the 300-ohm screws, then you're out of luck (unless you buy an RF modulator). The DVDR04 does have coaxial RF connectors, but only for antenna input and pass-thru; the DVD signal does not go through the coaxial output. -
I am trying to finalize a DVD-RW on my Ilo DVDR-04....and I keep getting a message for me to swap the DVD's. Why is this happening ? I checked the manual and it doesn't give any info other than basically 'push the button and let it happen'. Thanks
-
The recorder will not write to "-" media. It will only write to "+" media. That is why it is telling you to swap the media. Also it will not finalize RW media.
-
Let me correct myself....I actaully am using DVD+RW discs. Are you serious that the unit will not finalize DVD+RW media ? Does that mean that I can only view the DVD's on the Ilo DVDR04 unit....and not on my pc where I could possibly edit anything that I have on there ? Is there any other way to finalize the DVD+RW so that I can view it on other machines ?
-
Originally Posted by InnocentCat
That makes it playable.
I emailed Ilo tech support about the inability to play +rw's recorded on the Ilo and that is what they told me.
Similar Threads
-
Ilo DVDR04
By 2003 Hayabusa in forum Newbie / General discussionsReplies: 4Last Post: 2nd Sep 2010, 14:48 -
Replacing a DVD+R Drive in an Ilo DVDR04, is it really that simple?
By V Bot in forum DVD & Blu-ray RecordersReplies: 5Last Post: 7th Jul 2010, 09:48 -
Ilo DVDR04 replacement drive
By emyly7 in forum DVD & Blu-ray RecordersReplies: 11Last Post: 21st Aug 2009, 03:12 -
ILo dvd recorder not cooperating
By jhayes in forum DVD & Blu-ray RecordersReplies: 9Last Post: 9th Dec 2007, 10:06 -
Convert ILO DVDR04 into LiteOn 5005x!
By D'oh! in forum DVD & Blu-ray RecordersReplies: 16Last Post: 21st May 2007, 12:35