I've recently purchased a Pioneer DMR-220 from Walmart because I've seen many posts about it having good video quality and the excelent menu choices and things. But recently I've read tons about how good the JVC DR-M10 is with recording quality. I'm planning to convert my VHS tapes to DVD and then do it for some friends. So I was wondering everyone's opinions on this.
Does the quality of the JVC unit outweigh the quality and menu abilities of the Pioneer enough to warrant bringing it back and getting the JVC?
The JVC looks like it's about 50 bucks more from Circuit City than the Pioneer and I need to make a decision before the return time frame runs out. So what do you all think?
+ Reply to Thread
Results 1 to 7 of 7
-
-
I tried the Pioneer from Wally World, recorded 1 movie on it and took it back. The picture was too grainy for me. The JVC definitely has a better picture. As for the quality I didn't use the Pioneer long enough to judge Quality. Out of 3 JVCs I've used in the Past 2 months 2 of them performed flawlessly, the other 1 had problems in less than 2 weeks. They sure work good when they work though.
-
The JVC DR-M10 is $288 at ECost.com right now with free shipping and no tax. Some people don't do online ordering because of the ability to do in-store returns if they don't like the product, but I thought I would mention it because of the savings.
-
One other question. I've heard many people referring to JVC products having TBCs in them. Does anyone know if this JVC model has that as well? If so I know it would help in the decision to get one instead of the Pioneer.
-
Yes it does, here are the specifications:
JVC DR-M10S DVD Recorder
Full Specifications
DVD Player
DVD Recorder Yes
Recordable Media DVD-RAM, DVD-R, DVD-RW
Other Media Supported CD-R, CD-RW, DVD-RAM, SVCD, DVD-R, DVD-RW, CD, Video CD
DVD Type DVD recorder
Portable No
Form Factor Tabletop
Remote Control Universal remote control
Additional Features Simultaneous recording and playback, On-screen display, Time base correction, Progressive scanning, Block Noise Reduction, JPEG photo playback
Video Features
Progressive Scan Yes
Video DAC 10 Bit
Audio Features
Audio Output Stereo
MP3 Support Yes
Audio DAC 24 Bit
Digital Audio Format Dolby Digital output, DTS digital output
Connectors
Component Video Outputs 1 x component video output ( RCA phono x 3 ) - rear
Composite Video Outputs 1 x composite video/audio input ( RCA phono x 3 ) - front
Digital Coaxial Output 1 x SPDIF output ( RCA phono ) - rear
Digital Optical Output 1 x SPDIF output ( TOS Link ) - rear
S-Video Output 1 x S-Video input ( 4 pin mini-DIN ) - front, 1 x S-Video output ( 4 pin mini-DIN ) - rear
Connectors Other 1 x IEEE 1394 (FireWire/i.LINK) ( 4 pin FireWire ) - front, 1 x audio line-out ( RCA phono x 2 ) - rear, 1 x RF input - rear, 1 x RF output - rear, 1 x AV Compu Link - rear, 1 x remote control - rear -
Don't worry about recorders TBCs. None of them do anything significant. May as well not exist.
Pioneer is good, but only a runner-up to the JVC line.
Actually, I like LiteOn next to JVC. Then Pioneer.
I flop between 2 and 3 a lot.Want my help? Ask here! (not via PM!)
FAQs: Best Blank Discs • Best TBCs • Best VCRs for capture • Restore VHS -
None of the TBC's in DVD recorders or consumer grade VCR's are full frame... they are line TBC's. They can be somewhat helpful in stabilizing the video image, but will not strip copy protection. Only full frame TBC/frame synchronizers will do that.
Similar Threads
-
JVC DR-M10 Loading and Repair Question
By usaf64 in forum DVD & Blu-ray RecordersReplies: 555Last Post: 1st Jul 2013, 11:33 -
HOT DEAL: St. Louis Craigslist - $75 JVC DR-M10 DVD Recorder
By jbd5010 in forum Off topicReplies: 2Last Post: 16th Mar 2011, 08:21 -
problem recording with jvc dr-m10
By restauroman in forum RestorationReplies: 3Last Post: 28th Feb 2010, 11:47 -
JVC DR-M10 help
By colt4523 in forum DVD & Blu-ray RecordersReplies: 1Last Post: 20th Mar 2008, 06:53 -
How do JVC combo VHS/DVD recorders compare to M10 or M100?
By DGinnetty in forum DVD & Blu-ray RecordersReplies: 7Last Post: 27th Sep 2007, 12:14