VideoHelp Forum




+ Reply to Thread
Results 1 to 3 of 3
  1. Guest
    Hi,
    I've the same problem with BBMpeg and muxing the Videostream with two audiostreams. Can you transfer some replies to me if you get some? I'm not so often in here. My Adress: jhar67@web.de

    Thanx
    Quote Quote  
  2. First, make sure you have the latest BBMPeg - some earlier versions were problematic in this area (b18 is the latest - see the Tools link at the left).
    If you still get them, supposedly setting the initial pack startup delay (lower left of mux screen) to a larger number helps.
    I've also successfully used the old Mpeg Tool from TMPGEnc beta 12 called "VBV_Optimization" - it remultiplexes the mpeg and fixed the underflow problems for me when I was still using problematic version of BBMPEG/
    Quote Quote  
  3. where it says mux rate, replace those numbers with 0. BBMpeg expected a different value than what your files were encoded with. Before it starts to mux, BB will look at the streams, usually you'll see an error that tells you "your bit-rate is too high, re-encode with a lower bit-rate", and "watch out for PTS underflow and overflow."

    Default SVCD settings for BBmpeg is 2376, so just change the mux rate to 0, and it'll mux for you at your higher bit-rate encoded video.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!