GSA 4081b atapi error

[Taz140]

I currently backing up my daughter dvd's and running into problems at least 50 percent of the time I get a atapi error within the first few seconds of the burn,, rendering the disk useless I included the full log
can anyone help.



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero API version: 6.3.0.2
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axwhisky Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081 D: CDRom0
LITEON DVD-ROM LTD163 E: CDRom1
AXV CD/DVD-ROM F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 650MB (665776kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.5.2004
NeroAPI
10:02:48 PM #1 Phase 111 File APIProgress.cpp, Line 253
DVD-Video files sorted

10:02:49 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

10:02:49 PM #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4081B running

10:02:49 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

10:02:49 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

10:02:49 PM #6 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-At-Once, using DVD media

10:02:49 PM #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286223 (508:02.73, 4465MB)

10:02:49 PM #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

10:02:49 PM #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R
Disc Manufacturer: ONIDTE - CH
Disc Application Code: 64, Disc Physical Code: 193

10:02:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:02:49 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286224 (2286224) = #2286224/508:2.74
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286224 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------

10:02:49 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682186752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286224 | lead-out | 1 | 0x00 | 0x41

10:02:50 PM #13 Phase 24 File APIProgress.cpp, Line 253
Caching of files started

10:02:50 PM #14 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

10:02:50 PM #15 Phase 25 File APIProgress.cpp, Line 253
Caching of files completed

10:02:50 PM #16 Phase 36 File APIProgress.cpp, Line 253
Burn process started at 2x (2,770 KB/s)

10:02:50 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:02:50 PM #18 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

10:02:50 PM #19 Text 0 File Mmc.cpp, Line 19451
Set BUFE: supported -> ON

10:02:50 PM #20 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

10:02:50 PM #21 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:03:11 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x013E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x32 0x4D 0x03 0x0C 0x0C 0x00

10:03:11 PM #23 CDR -1135 File Writer.cpp, Line 301
Write error

10:03:11 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:03:11 PM #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:03:11 PM #26 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was -1

10:03:13 PM #27 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[APVM]

Try putting your LG as Secondary Master with the liteon as secondary slave.

[Taz140]

Tks for you reply,, the drive was on secondary Master, however the point is now mute, not two days after I posted this, the drive stop working altogether. I am getting it exchange on warranty as we speak.