Pioneer 107 Hacked firmware 1.13

[Kamran]

Everything is working so well i can burn any media at any speed i want. There is howeve one problem.. my read speed on my pioneer has gone down 4x and my read speed on my combo drive has gone down to 7x i think their ment to be higher my combo used to be 12x not sure about pioneer.. any suggestions i have the liteon ltc-48161H

[budz]

http://club.cdfreaks.com/forumdisplay.php?s=&daysprune=30&forumid=44

go there for more info at the liteon forum

http://club.cdfreaks.com/forumdisplay.php?s=&daysprune=30&forumid=87

go there for pioneer forum

[garryheather]

If the decrease in speed is on stuff you've just burnt with your hacked firmware, it's because the drive is having to do more error correction on your crappy burns...

Why are people such speed freaks these days ? I'm happy to write at 1x if it means the burn is reliable...

[Kamran]

Well actually thanks to budz everything is working fine now! my "crappy" burns are reading fine at 12X,14X,16X perfectly fine.

[garryheather]

So what's all this about then ?

There is howeve one problem.. my read speed on my pioneer has gone down 4x and my read speed on my combo drive has gone down to 7x i think their ment to be higher my combo used to be 12x not sure about pioneer.. any suggestions i have the liteon ltc-48161H

[Kamran]

well then he gave me the link to fix that

[Kamran]

but my pioneer is still ripping at 2.0X not 12 even though i have hacked firmware any help

[garryheather]

I always suggest buying a DVD-ROM drive... saves wear and tear on the more expensive recorder, too.

I picked up a Lite-On for about £25 that blows every recorder I've ever seen out of the water when it comes to ripping. Didn't have to do any firmware upgrades (and as such, invalidate my warranty) in order to achieve it either.

[MeTaLgEaRsOoTy]

just because a car has 140mph on the dash board, doesnt mean itll go that fast all the time..does it.
12xspeed is the fastest rip.
2xspeed-maybe 6or 7 speed is about the normal from a dvd-r+r.
for an original movie,on ,say,a full dual layer disc,it might reach 12 speed,or higher.
maybe only get ot 10..it all depends.

as for burn speed dropping...thats disc dependant too.
some dvd-+rs will burn at 8speed fine,some only at 4.