Nero used to work but fails now - log attached

[lal]

Hi All,

I've been using Nero for quite a while now. Never had any problems.
This morning I made two coasters so far It is burning half of the
disk and erroring out. Appreciate if anybody can help me out to
resolve this issue. I've attached the log below:


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:03:20 AM
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 11:37:36 PM
Nero Version: 5.5.10.50
Recorder: <SONY DVD RW DRU-510A> Version: 1.0b - HA 1 TA 1 - 5.5.10.50
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITEON DVD-ROM LTD163D>Version: GHR3 - HA 1 TA 0 - 5.5.10.50
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 1 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (523260kB)
Free physical memory: 301MB (308972kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

10.4.2004
UDF/ISO compilation
8:47:15 AM #1 Phase 112 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation started

8:47:15 AM #2 Phase 114 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation completed (no file modified)

8:47:15 AM #3 Text 0 File Isodoc.cpp, Line 7589
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:47:15 AM #4 Phase 111 File dlgbrnst.cpp, Line 1655
DVD-Video files sorted

8:47:16 AM #5 Text 0 File Reader.cpp, Line 115
Reader running

8:47:16 AM #6 Text 0 File Writer.cpp, Line 125
Writer SONY DVD RW DRU-510A running

8:47:16 AM #7 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

8:47:16 AM #8 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

8:47:16 AM #9 Text 0 File Burncd.cpp, Line 3744
Turn on Disc-At-Once, using DVD media

8:47:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286432 (2286432) = #2286432/508:5.57
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

8:47:16 AM #11 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286431 (508:05.56)

8:47:16 AM #12 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

8:47:16 AM #13 Text 0 File DlgWaitCD.cpp, Line 1693
Recorder: SONY DVD RW DRU-510A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 1

8:47:16 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder SONY DVD RW DRU-510A for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387952640

8:47:16 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286432 (2286432) = #2286432/508:5.57
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286432 blocks [SONY DVD RW DRU-510A ]
--------------------------------------------------------------

8:47:16 AM #16 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

8:47:16 AM #17 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

8:47:16 AM #18 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

8:47:18 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

8:47:18 AM #20 Text 0 File Cdrdrv.cpp, Line 7931
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 52 49 43 4F 48 4A - 50 4E 52 30 31 02 38 23 ..RICOHJPNR01.8#
54 37 09 00 3C 67 00 AC - 62 16 18 0B 0B 0A 0B 01 T7..<g..b.......
19 1B 0B 0B 0E 0F 01 00 - 00 00 00 00 00 00 00 01 ................

8:47:18 AM #21 Text 0 File DVDPlusRW.cpp, Line 462
Start write address at LBA 0
DVD high compatibility mode: Yes

8:53:21 AM #22 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x023F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x0D 0xC3 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x0D 0xBA 0x30 0x12
0x00 0x00 0x00 0x00 0x0C 0x08

8:53:21 AM #23 DVDR -1135 File Writer.cpp, Line 333
Write error

8:53:21 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

8:53:21 AM #25 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

8:53:50 AM #26 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

8:53:50 AM #27 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 8/27/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[richdvd]

try different media

[lal]

I've already burnt about 40 DVDRs using the same media, and same
PC. I don't think media is a problem. Moreover, the media is from the
same pack of 50.

[DeleriumMDK]

Not every disc is created equally. What brand are they? Just because some burnt properly doesn't mean they all will.

[richdvd]

have you tried different software?

[lal]

DeleriumMDK- I am trying the disks from the same pack. So, I guess
they all must be from the same brand. It is Memorex 4X, made by
RICHOJPN.

richdvd - No, I haven't tried different software. I've been using Nero for neary an year now. Never had any problem. This happended suddenly.
I'll try another software.

[corby20]

I am having the same problems, nero just stops and the same error is produced eachtime/ I have looked everywhere for a solution, many people have the problem but there has been no solutions anywhere, log also is displayed.

Shane

1502-4230-1279-0757-2957-5706

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 9:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 30/01/2003 7:37:36 AM
Nero Version: 5.5.10.56 (Nero Express)
Recorder: <TOSHIBA DVD-ROM SD-R6012>Version: 1733 - HA 0 TA 1 - 5.5.10.56
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-R6012>Version: 1733 - HA 0 TA 1 - 5.5.10.56
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6012 atapi Port 0 ID 1 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 479MB (491036kB)
Free physical memory: 219MB (224684kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

18.4.2004
UDF/ISO compilation
3:29:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation started

3:29:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation completed (no file modified)

3:29:17 PM #3 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

3:29:17 PM #4 Phase 111 File dlgbrnst.cpp, Line 1655
DVD-Video files sorted

3:29:17 PM #5 Text 0 File Reader.cpp, Line 115
Reader running

3:29:17 PM #6 Text 0 File Writer.cpp, Line 125
Writer TOSHIBA DVD-ROM SD-R6012 running

3:29:18 PM #7 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

3:29:18 PM #8 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

3:29:18 PM #9 Text 0 File Burncd.cpp, Line 3773
Turn on Disc-At-Once, using DVD media

3:29:18 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1742928 (1742928) = #1742928/387:19.3
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

3:29:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 1742927 (387:19.02)

3:29:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

3:29:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: TOSHIBA DVD-ROM SD-R6012, Media type: DVD-RW
Disc Manufacturer: OPTODI - SCK001
Disc Application Code: 64, Disc Physical Code: 214

3:29:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder TOSHIBA DVD-ROM SD-R6012 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -725143552

3:29:20 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1742928 (1742928) = #1742928/387:19.3
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1742928 blocks [TOSHIBA DVD-ROM SD-R6012]
--------------------------------------------------------------

3:29:20 PM #16 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

3:29:20 PM #17 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

3:29:20 PM #18 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 1x (1,380 KB/s)

3:29:20 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

3:29:20 PM #20 Text 0 File DVDR.cpp, Line 1323
Recording mode: Sequential Recording Mode

3:29:20 PM #21 Text 0 File Mmc.cpp, Line 19546
Set BUFE: supported -> ON

3:29:20 PM #22 Text 0 File DVDR.cpp, Line 1437
Start write address at LBA 0
DVD high compatibility mode: Yes

3:29:20 PM #23 Text 0 File Cdrdrv.cpp, Line 7933
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:46:57 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1447
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x028A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0A 0x17 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

3:46:57 PM #25 DVDR -1135 File Writer.cpp, Line 333
Write error

3:46:57 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

3:46:57 PM #27 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

3:46:57 PM #28 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 1x (1,380 KB/s)

3:46:57 PM #29 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 9:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 9:02:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Please can anybody help?