rick6612 wrote:There are lots of interesting posts but how do you know the information is there or not. Because you've stated you're blocked from accessing the cdfreaks forums. Within some of the posts there is information. Were you able to access information from 100 days ago? If you go to the bottom of the website it has "from" button where you can choose how many days back you may read from. Have you tried using NERO RECODE? In my opinion the problems you've stated are software related.I checked out cdfreaks over the weekend (for some reason, we're blocked from accessing cdfreaks forums from where I work!). Lots of interesting posts, but I didn't find anyone who said they were able to burn at 8x when using any brand of 8x media with a PX-
+ Reply to Thread
Results 31 to 51 of 51
hi guys i am amazed at the posts of rick . I have beeen using aPlextor PX-708A drive from 15of dec 2003 with no complaints . Earlier the 4x dvd+R's i was using came from www.ukdvdr.co.uk and the brand's name was bulkpaq dvd+r( 4x). Now i am using Ritek Silver 4x (8X) Speed 4.7gb DVD+R. 25 PACK with a product code of ( pr1) which is available on the above mentioned site and burning the same at 8x without any problem. I suggest that u use the same.I have already converted many of my friend's wedding dv tapes to dvd format and they are able to play the same on different dvd player's like (sony, pioneer, philips, jvc, panasonic, aiwa) etc without any problem's.
note: use latest nero 220.127.116.11 for burning
Originally Posted by budzWere you able to access information from 100 days ago?In my opinion the problems you've stated are software related.
Originally Posted by pentaganI have already converted many of my friend's wedding dv tapes to dvd format and they are able to play the same on different dvd player's like (sony, pioneer, philips, jvc, panasonic, aiwa) etc without any problem's.note: use latest nero 18.104.22.168 for burning
I've had a Plextor drive since Dec 2003. Some thoughts:
1. Plextor support sucks. Period. They've sucked since about 10 years ago, and they still suck. But I can say that for pretty much all tech support that I've contacted.
2. The drive works well with branded media (approved) DVD's and pretty much all CDs. But with cheap DVD's I've only been able to find 1 in 15 brands that work (will write and then read properly).
If given the chance again, I would probably go for Pioneer, since it's said to be the most compatible with media. I don't have the budget to always buy "approved" DVD media.
2. The drive works well with branded media (approved) DVD's and pretty much all CDs. But with cheap DVD's I've only been able to find 1 in 15 brands that work
I don't have the budget to always buy "approved" DVD media.
Originally Posted by HAMP
I was wondering, do you use water for your car when you can't afford gas?Corned beef is now made to a higher standard than at any time in history.
The electronic components of the power part adopted a lot of Rubycons.
Like using only approved GM auto fluid in your gearbox.. I was thinking of buying a plextor But I've gone off the idea now.
firefoxx wroteI don't have the budget to always buy "approved" DVD media.
Originally Posted by budz
The latest word from Plextor Tech Support is that it will ONLY burn at 8x speed on Taiyo Yuden or Ricoh 8x media. Despite what the web site says, these are apparantly the only brands of 8x media that will work.
The thing that is really interesting about this is that we called Taiyo Yuden and they told us it would be at least another month before their 8x media is available to consumers. And Ricoh brand name media is not even sold in the US! It is only sold under other brand names (e.g. Fuji, etc.) and then it is a guessing game as to whether or not a particular spindle of discs will actually be Ricoh discs!
I asked several times where I could get this elusive 8x media that supposedly will work, but they conveniently dodge that question everytime I ask!
What a joke.
To make things more interesting, they (Plextor Tech Support) asked me to send them some of the Verbatim and Memorex 8x media I have so they could "analyze" it and figure out what it takes to get their drive to be able to burn this media. Evidently they cannot afford to go out and buy a couple of spindles of discs themselves for testing purposes.
Don't be surprised if a new firmware version comes out before long that adds support for burning at 8x speed on actual 8x media.[/b]
"I was wondering, do you use water for your car when you can't afford gas?"
Your argument would sound more convincing if you didn't take it to the extreme (like most loyalists). A better comparison would be "do you use octane 91 when you can't afford octane 95?".
I should have stated my normal caveat (which usually stops brand loyalists from flaming me), and that is "my experiences/opinions are my own, and other's experiences may differ".
I have a Plextor 12x CDRW, and it still works fine after tens of thousands of writes. I would have been more satisfied with my Plextor DVDR IF it was able to competantly write on more than just one cheap brand in 15. That's an apalling track record, at least FOR ME. Yes, it does what it's advertised to do, and that is write on APPROVED media, which costs roughly 8-10 times the price of cheap media. I DO have the budget to put important files on approved media. I DON'T have the budget to ALWAYS write EVERYTHING on approved media.
It's a premium, expensive drive. If you also have the money to dish out on premium, expensive media, then this is certainly the drive for you.
I just don't get it. I've been writing on crappy Pengo media with my PX-708A without any problems. It's only 2.4X media but my choices around here are limited....
firefoxx wroteIt's a premium, expensive drive. If you also have the money to dish out on premium, expensive media, then this is certainly the drive for you.
Perhaps I should have also written my other caveat: "I don't live in the US, but in Thailand". I keep forgetting that I wrote all these caveats in another thread, and not this one. My bad, my bad.
My choices for DVD media are rather limited. No 8x media AT ALL. There are no online media shops. Ritek brand media is not sold here. There are about 20-30 different disc types sold, and that's only if you look REAL HARD. Only the very cheapest media is sold in spindles, everything else is sold individually. There are no retail stores which offer sales like Compusa with their shock price spindle sales. Sales like that just don't happen here, retail or on-line. Most stores don't even carry name brands like Taiyo Yuden or Mitsui, since most people can't afford those brands. When I say that I've tried 15 cheap brands, that means that I've gone through nearly all that there is in Thailand.
The cheapest price for Taiyo Yuden discs is $4.50 per disc (4x DVD-R). The cheapest price for el-cheapo spindled discs is 50 cents per disc, and cheaper if you buy bulk.
I did say that my experiences were my own, so please consider that when you choose to flame me. Not everyone lives in the US. Not everyone has the luxury of unlimited choice.
I don't get it, but is it THAT bad that I criticize an expensive drive for not meeting my expectations?
Originally Posted by firefoxx
I too, am happy with my 708A. I too, burn 4x media (memorex CMC) at 8x speed. I have not tried 8x media. My biggest surprise was when backing up a movie DVD with a severe scratch on it. I use an NEC ND-2500 to read and the 708A to write with. After cleaning the DVD with toothpaste several times to ease the scratch, etc., the NEC would not read past the scratch with DVD Decriptor. I popped it into the 708A and it read perfectly without errors. I'm pleased with my 708A.
I've tried this new one but unfortunatly, after flashing bios and rebooting, when the system is trying to recognize the device, I've got the classic "memory error" with the blue page on the screen.
What's the pb?Lanparty nf3 250gb, Athlon 64, ATI Radeon 128mb (256 bit), Plextor 708A, Pioneer 107D, Nec 2510 A, WD 80gb, Maxtor 160gb, Maxtor 200gb Sata, WD 74gb Sata 10000 rpm, Geil CL 2,5 1024mb PC3200, HP 1825 18".
check to see if the drive is being recognized in your BIOS, make sure it's set to AUTO. How is the drive hooked up in your pc? Need a little more info on your problem. What chipset do you have on your motherboard? Is the 708A set to DMA mode?
The drive is hooked as primary master on IDE 2 and it's recognized correctly in the bios. My mb has a nforce 2 chipset but the ide drivers are the ones of win Xp and of course, the dma is set.Lanparty nf3 250gb, Athlon 64, ATI Radeon 128mb (256 bit), Plextor 708A, Pioneer 107D, Nec 2510 A, WD 80gb, Maxtor 160gb, Maxtor 200gb Sata, WD 74gb Sata 10000 rpm, Geil CL 2,5 1024mb PC3200, HP 1825 18".
My mb has a nforce 2 chipset but the ide drivers are the ones of win Xp and of course, the dma is set.
Or check the PLEXTOR FORUM at cdfreaks.com read the FAQ. here is the link: http://club.cdfreaks.com/showthread.php?t=49767
acks !okie dokie it's time for me to leave for work! good luck