(I originally have this posted in DVD To DVDR forum, but thought I'd post the guide here.)
Couple of things:
- Transition from 1 to 2 is not perfect... you see Marty open the garage door then you see him open the door again as movie 2 starts.
- Transition 2 to 3 is spot on!
- The transitions themselves have a slight pause as the movie starts up probably due to the fact that I made each movie a separate track.
- Movies 2 and 3 are less pixelated than Movie 1. This may be due to the fact that 2 & 3 are the repressed widescreens.
[*]TMPGEnc DVD Author - each movie into a separate track.
- DVDDecrypter (File mode: All) on each movie.
- DVDShrink on each movie separtely.[list:28f7b6168c]
- Reauthor: 0% Compression / English Audio / English Subchannel.
- Or into 1 track depending on preference
[*]Movie 2 -
- Movie 1 -[list:28f7b6168c]
- Cut scenes 00:00:00;00 - 00:00:28;10 = Beginning credits up to where Back To The Future title sweeps in.
- Cut scenes 01:49:17;16 - End = Approximate place for Movie 2 to start and ending credits (this will need further adjustment for better transition).
[*]Movie 3 -
- Cut scenes 00:00:00;00 - 00:00:34;21 = Beginning credits up to where Marty opens garage door (approximately).
- Cut scenes 01:40:32;13 - End = BEST (IMO) place for Movie 3 to start and ending credits.
[*]Main Menu with play all and select track are made (chapter selection is taken out).
- Cut scenes 00:00:00;00 - 00:01:37;08 = Beginning credits up to where 3 and 2 are in perfect sync (IMO).
- Cut scenes 01:50:09;29 - End = The end credits are cut after The End sweeps and disappears.
[*]Disregard DVD size and Bit rate warnings when encoding.[/list:u:28f7b6168c][*]DVD2One and change size from 4472MB to 4300MB (or there abouts).
[*]Use ImgTool to burn DVD[/list:28f7b6168c]
I'm not sure if I want to put any more work into this or not. I guess the things I would change are:[/list:u:28f7b6168c]
- Try and get a better transition between 1 & 2
- Burn all three as one track, but make each one a chapter type selection in the menu if I want to go to one directly.
- Perhaps encode to VCD then do a VCD-to-DVD conversion back to get a better picture quality.[list:28f7b6168c]I'll need to re-find that guide. You can get 300 Minutes of SVCD on DVD (not enough) or 480 Min. of VCD.
For what I got now, I can live with.
I'm about to put one of Meritline's Glossy CD Label on this DVD. If I run into the nightmares people have with labels on DVDs, perhaps I'll make a new DVD with the changes.
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays!
+ Reply to Thread
Results 1 to 2 of 2
Thread
-
-
Try DVD2ONE,it's join function works much better than DVD Shrink.
Your compressing 18GB's to 4.37,anyway you slice it the results will look horrible.
Similar Threads
-
Problem with subtitles (anecdotes) in Back to the Future DVD
By lhv_314 in forum SubtitleReplies: 0Last Post: 25th Jul 2009, 11:49 -
The future of dvd players...
By nasdravi in forum DVD & Blu-ray PlayersReplies: 16Last Post: 15th Jun 2009, 18:11 -
back to burning movies
By ford10000 in forum Newbie / General discussionsReplies: 15Last Post: 25th Jan 2009, 01:38 -
My DVD TRILOGY collections
By yoda313 in forum Off topicReplies: 90Last Post: 25th Jun 2008, 18:54 -
burning troubles on the back end
By beck59 in forum Authoring (DVD)Replies: 1Last Post: 24th Dec 2007, 23:11