Problems with dvd shrink/ dvd decrypter

[idleSTART]

I was trying to do a one to one copy with both programs and then something that says like cycle redundency came up and it came out like an error. I was wondering how i could by pass this or just make a one to one copy some other way with a different freeware program. Thank you for your time.

[zeub]

Could you give some more info. Most probably you have some kind of problem with the disk you are trying to copy. Still need more info.

[idleSTART]

When it gets to 90% and its always 90% percent the reading rate goes down and after like 356 tries, a window that says I/0 Error! In this similar format
I/O Error!
Device:[1:0:0]
ScsiStatus: 0x02
Interpretation: Check COndition
CDb: 2a 00 ff ff ff 6a 00 00 20 00
Interpretation: Write (10) - Sectors: 4294967146-429467177
Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 2c 00 00 00 00 00
Interpretation: Comman Sequence Error

It says something like that i also tried dvd shrink and sometimes it gets to 96 and sometimes it gets to 85 but never finishes because an error. Thank you for your time

[dafreak]

I had the same problem. I found out that it's due to bad media.

I kept getting the same error burning with dvd decrytper and nero. For me the error kept coming up at 1% of the burn, so what i did was:

1. chose to burn at 1x speed
2. kept going through the stack till there was one that would actually burn.

Needless to say, I will not be buying those dvd r- disks again.

[idleSTART]

The problem was just reading the disk. Yea, i think the dvd original might be a little bad or something. After i tried a lot of times over and over, it actually worked and i burned that. Well, anyways thanks for your reply and have a nice holiday weekend.