VideoHelp Forum




+ Reply to Thread
Results 1 to 3 of 3
  1. Hi .... I buy it this DVD burner (LDW 411S) two days ago...

    I connected as MASTER in the secondary EIDE.....

    I have the next configuration before the DVD Burner..

    EIDE Primary
    Master HDD 40 GB (I dont remember the manufacture)
    Slave Lite on CD Burner 24102BS

    EIDE Secundary
    Master DVD Rom

    So i change it , to this way with DVD burner
    EIDE Primary
    Master HDD 40 GB (I dont remember the manufacture)
    Slave Lite on CD Burner 24102BS

    EIDE Secundary
    Master DVD Burner Lite on LDW 411S
    Slave DVD Rom

    This way I have problems for detect the DVD Burner....
    Some times read a CD , sometimes dont....
    I cant Burn or erase RW DVD...

    I change to
    EIDE Primary
    Master HDD 40 GB (I dont remember the manufacture)
    Slave nothing

    EIDE Secundary
    Master DVD Burner LDW 411S
    lave nothing

    Work fine... all ok in the DVD Burner....

    So I ... What can I do?

    I try this one conections
    EIDE Primary
    Master HDD 40 GB (I dont remember the manufacture)
    Slave Lite on CD Burner 24102BS

    EIDE Secundary
    Master DVD Burner LDW 411S
    Slave nothing

    Works , I say it little slow.....but make all should be do ....

    What Im doing wrong...?
    What should "respect" in the conections (DVD Burner as Master in secundary and HDD as master in primary, of course)....

    TA
    Quote Quote  
  2. Member
    Join Date
    Apr 2002
    Location
    australia,brisbane
    Search Comp PM
    never put a cd/dvd rom burner on the smae ide as your main hard drive will cause problems just put your two burners on the 2nd ide and you will have no probs and throw the old cdrom away and put another hard drive on your primary
    Quote Quote  
  3. Originally Posted by pharlap
    never put a cd/dvd rom burner on the smae ide as your main hard drive will cause problems just put your two burners on the 2nd ide and you will have no probs and throw the old cdrom away and put another hard drive on your primary
    What about if you got a controller card? I have my DVDrom and CDburner on one IDE. My 2 HDs on the another. THEN, I have my Lite on 411s Burner on the IDE controller card. I can't seem to write DVDs correctly. And just recently, an Audio CD. I normaly used Nero 6.3 and DVD Decrypter 3.1.9. Media: Memorex DVD-R. I thought there was no such thing as Good and bad media? Just the luck of the draw. I burned DVD isos with no problems a few weeks ago, but now... no luck. ??/
    Thx
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!