A GOOD GUIDE ON HOW TO COPY A DVD

[Ecodez]

Ok Here Are The Tools You Will Need

DVD Decrypter (Ripping Tool Bypasses Protection )
Link URL http://fileforum.betanews.com/download.php3?fid=1011845169

DAEMON Tools (DVD/CD Drive Emulator)
Link URL http://www.daemon-tools.cc/portal/download.php?mode=Download&id=34

Nero Recode (Re-Encodes Video So It Fit Onto 4.7Gb Discs Comes With
Nero Vision Express)
Link URL http://www.nero.com/en/download_nero.php?pak=2

Nero Burning Rom (Burns The Video Files Onto A Disc )
http://www.nero.com/en/download_nero.php?pak=1


Step 1

Ok the first thing you need to do once you have installed all those
programs is run DVD Decrypter once its running under source select the dvd drive that has the film in it you want to rip.Once you have selected the right drive go to mode the go on ISO then READ.Once you have done that select the folder you want to save the image and click on the dvd symbol and points to a hardisk drive at the bottom

Step 2

Once ripped run the program DAEMON Tools and a little bolt of lighting like icon should appear in the task bar at the bottom left of the screen.Right click on that and a menu will pop up on the menu select virtual CD/DVD-Rom then click the top one which should say device and what ever letter the virtual drive is called then click mount image.
Browes where you saved the dvd iso and select it now your pc wil think
you have inserted a dvd but you have actually emulated it.


Step 3

Ok now run nero recode which came in the nero vision express pack
ok once the program is running under what would you like to do click
copy entire dvd to dvd.Once you have done that click on the VIDEO_TS folder and press ok.Nero recode will start to analyse it which will take about 1-2.Once its done that there will be a compression setting
just make sure its set to fit to dvd 4.7gb DVD-5 and click next.
Now It will start to encode.

Step 4

Ok now run nero burning rom not nero startsmart nero burning rom in program files or where you saved it when you installed it.Once its running
on new compilation Select DVD-Video on the left menu then click new.
Here you Have to sides the left side is the folders that will be burned on to the dvd which are AUDIO_TS and VIDEO_TS on the right are the folders in your pc find the folder which you save the dvd in on nero recode which by defult is My Documents\Nero Recode the drag all the dvd files on the
VIDEO_TS folder on the left once you have done that click on the match stick on a disc symbol then Burn

DONE

[tompika]

Rip in File mode and loose step 2.

[Ecodez]

true not bad idea

[Unhappyclown]

Also could just use something like AnyDVD and not have to use DVD Decrypter.

[tompika]

I do it in one step:

Run AnyDVD 3 in the background.
Use Recode 2 wich automatically burns with Nero 6.3

[Gurm]

What is GOING ON with the amazing number of 3-post newbies posting irrelevant and utterly stupid guides on "how to copy a DVD" lately with lots of extra steps and garbage in them?

Did you bother to read the content of the site? What made you think that ANY of us were so clueless as to need this "guide" that you wrote?

Yeah, I'm being a little harsh. Please don't be TOO offended by this. But seriously - you're like the 10th person in the past couple of weeks to come in and post some "guide" to "copying a DVD" that was silly and amateurish. We already have guides, and none of us need them anyway.

- Gurm

[MOVIEGEEK]

Step 1
Use DVDDecrypter to rip and burn DVD-5.

Step 2
Use DVDShrink to rip and transcode DVD-9/10/18 to put on one DVDR.Use DVDFab to split DVD to two DVDR.

Step 3
Use Imgtools classic to create an ISO image and burn with DVDDecrypter.

No offense but I have to agree with Gurm this guide wasn't needed.

[iooi]

Step 1
Read guides on left <------

Step 2
Follow instructions

My fav Alt steps
1
Use DVDDecrypter to rip to hard drive.

2
Use Dvd2one to compress to one dvd-r.

Step 3
Pop down pub to celebrate :P 8)

[Paul Simmel]

What is GOING ON with the amazing number of 3-post newbies posting irrelevant and utterly stupid guides on "how to copy a DVD" lately with lots of extra steps and garbage in them?

Did you bother to read the content of the site? What made you think that ANY of us were so clueless as to need this "guide" that you wrote?

No reason to be so nasty...

Do you want donations to this site, or do you want to blow people away for their contibutions because they aren't as up to what this site offers as you? I've been watching this site for years, and learning, and just recently contributing to others as I have been slowly comming up to speed. If I had learned something, and posted it here, and had a response such as yours, I'd have left here a long time ago!

[Paul Simmel]

Ecodez,

I am a supporter of this website. I have learned much from here. As time has warranted, I have browsed and learned more and more, and as issues have presented themselves in my video world, I have posted for answers to my questions/issues. I tell all my friends of this place. This is a great website!

My posts have never been referred to as irrelevant or stupid, thus, after reading this thread in which you were called such, I respond right now.

Because your “offending” post has been covered in some detail by others SOMEWHERE on this site, doesn’t make you stupid, nor does it make what you said irrelevant. There are ways to direct people to source articles/tutorials which are covered here, but the above post is not how to do it.

By and large, for me, everyone here has been informative and nice and understanding with my posts, from day one. Great detailed help. Wonderful sources! Yet we have that 1% or 2% who have had their bad day, and kicked the cat (living in a red state) when it was the dog who crapped on the couch, (blue state) (knowing full well)!

[iooi]

What is GOING ON with the amazing number of 3-post newbies posting irrelevant and utterly stupid guides on "how to copy a DVD" lately with lots of extra steps and garbage in them?

Did you bother to read the content of the site? What made you think that ANY of us were so clueless as to need this "guide" that you wrote?

No reason to be so nasty...

!

I dont think Gurn was being nasty mearly pointing out that if you read the guides you will find easier ways of doing things. If people wish to suggest new ways of doing things like this then fine write a guide and submit it to the list. The trouble is newbies (yes i know we were all them once) see posts like this and go the route thinking its the way things are done, when there are easier ways already posted in the guides....Which never seem to get read by some.

Happy Christmas everyone...

[spur911]

What is GOING ON with the amazing number of 3-post newbies posting irrelevant and utterly stupid guides on "how to copy a DVD" lately with lots of extra steps and garbage in them?

Did you bother to read the content of the site? What made you think that ANY of us were so clueless as to need this "guide" that you wrote?

Yeah, I'm being a little harsh. Please don't be TOO offended by this. But seriously - you're like the 10th person in the past couple of weeks to come in and post some "guide" to "copying a DVD" that was silly and amateurish. We already have guides, and none of us need them anyway.

- Gurm

This invective could only come from someone so miserable that we should actually pity. Seriously, get some help. No one should become this enraged about an anonymost post on an internet message forum. I truly hope you find peace and happiness, especially now that the holidays are upon us.

[wulf109]

The guides don't bother me,just ignore them. What bothers me is all software rip-offs that now get posted.

[Treebeard]

If you going to post guides (albeit a bad one) post them in the guides forum!! aaaaggggghhhhhh.

oh, and merry christmas.