Where is VCDTools X (and driver for MMB and A05)?

[torque2k]

Hi, all.

Thanks for a great forum, BTW!

I'm looking for VCDTools X (for running on Jaguar). All links I've found tonight are dead dead dead. I can't even Google it up! Has this project disappeared for a reason, or am I just a dodo?

Also, sorry to piggyback this, but is there a way to burn using Missing Media Burner to my Pioneer A05 (NOT a SuperDrive, it's an addon, internal in my dual G4-450 Gigabit)? I keep getting errors, which probably means I don't have the right driver selected (generic mmc?), but can't find more info.

Thanks,
Dan

[galactica]

not sure why the links are down, but ill host one for a bit

Click here

you should be able to use that drive, does it show up in the drives option?


I have two drives like you, you can see they are both represented in the drive tab. i use the drivers as shown

[torque2k]

I tried changing the driver to -mmc-raw, and my drive does indeed show up, and the program looks to be making the conversion (SVCD-prepped MPEG file dropped into MMB set to Burn MPEGs To SVCD), but then I get this:

IODVDServices/1: PIONEER DVD-RW  DVR-105        Rev: 1.21
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0000)

Starting write resid: 68
at speed 4...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
resid: 104
Turning BURN-Proof on
Using 16 byte P-Q sub-channel data mode.
Executing power calibration...
Power calibration successful.
WARNING: No super user permission to setup real time scheduling.
Writing lead-in and gap...
?: Undefined error: 0.  : scsi sendcmd: no error
CDB:  2A 00 FF FF D6 5B 00 00 0D 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 30784
cmd finished after 0.006s timeout 20s
ERROR: Write data failed.
ERROR: Writing failed.

... and that's all she wrote. Weird. I'll have to try some other burns tomorrow...

Thanks for the quick response!!!
Dan

EDIT: I also tried setting the "Use Superuser" option and used my password, no difference.

[galactica]

hmmmm
may i suggest passing this along to ross?
his email is on his site for MMB.

he is usually quick to reply.