I upgraded to 7.27 firmware update and got it to load sucessfully, yet when I put in any Memorex DVD+R movie, it tries to read the disc then goes blank and continues in a loop. It never actually reads the disc. What is wrong with my player to prevent it from reading the media?
Do I have to get a new Player?
+ Reply to Thread
Results 1 to 9 of 9
-
-
Before I got a new player I'd try a different media. I have a 711 also but use DVD-R with no probs. Did you look up the 711 on the DVD Players guide to the left and see if there were any other complaints ?
PS Here they are. Looks like lots of DVD+R media work. You have to fill the disc to at least 4 gigs or so for it to work./ Any less and it won't work with any format.
1 Bulkpaq DVD+R (MEDIA ID001) comments, 1 plays 0 dont play.
1 Discrite DVD-R (TDKG02000000) comments, 1 plays 0 dont play.
1 Fujifilm DVD-R (TYG01.......) comments, 1 plays 0 dont play.
1 Generic/Unbranded DVD-R (PRODISCG02..) comments, 1 plays 0 dont play.
1 Imation DVD+RW (RICOHJPNW01) comments, 1 plays 0 dont play.
1 Imation DVD-RW (OPTODISCK001) comments, 1 plays 0 dont play.
1 KHypermedia DVD-R (CMC00RG200..) comments, 1 plays 0 dont play.
1 KHypermedia DVD-R (TDKG02000000) comments, 1 plays 0 dont play.
2 Maxell DVD+R (RICOHJPNR00) comments, 2 plays 0 dont play.
1 Medianca DVD+R (DDDessauV10) comments, 1 plays 0 dont play.
1 Melody DVD-RW (PRINCO......) comments, 1 plays 0 dont play.
1 Melody DVD+RW (CMC.MAG.W01) comments, 1 plays 0 dont play.
1 Melody DVD-R (Auvistar....) comments, 1 plays 0 dont play.
1 Melody Group Sigma DVD-R (CMC MAG. CO.) comments, 1 plays 0 dont play.
1 Mitsubishi DVD+RW (MCC.....A01) comments, 1 plays 0 dont play.
1 Nashua DVD-R (OPTODISCK001) comments, 1 plays 0 dont play.
1 Nashua DVD+R (DATATRAK001) comments, 1 plays 0 dont play.
1 Optical DVD-R (ONIDTECH....) comments, 1 plays 0 dont play.
1 Packard Bell DVD+R (RICOHJPNR00) comments, 1 plays 0 dont play.
1 Philips DVD+R (RICOHJPNR00) comments, 1 plays 0 dont play.
2 Princo DVD-R (TDKG02000000) comments, 1 plays 1 dont play.
1 Princo DVD-R (PRINCO......) comments, 1 plays 0 dont play.
1 Ricoh DVD+R (RICOHJPNR00) comments, 1 plays 0 dont play.
1 Ritek DVD-R (RITEKG03....) comments, 1 plays 0 dont play.
1 Ritek DVD-R (RITEKG04....) comments, 1 plays 0 dont play.
1 Ritek DVD+R (RICOHJPNR00) comments, 1 plays 0 dont play.
1 Sony DPR47/120 DVD+R (RICOHJPNR00) comments, 1 plays 0 dont play.
1 Sony DPW47/120 DVD+RW (RICOHJPNW01) comments, 1 plays 0 dont play.
1 Sunstar DVD-R (.F`.........) comments, 0 plays 1 dont play.
1 SW Technology DVD-R (OPTODISCK001) comments, 1 plays 0 dont play.
1 That's DVD+R (YUDEN000T01) comments, 1 plays 0 dont play.
1 That's Write DVD-R (Lead Data) comments, 1 plays 0 dont play.
1 That's Write DVD-R (PRINCO......) comments, 1 plays 0 dont play.
1 That's Write DVD-R (LEADDATA01..) comments, 1 plays 0 dont play.
2 Verbatim DataLifePlus DVD-R (MCC 00RG200) comments, 2 plays 0 dont play.
Add your DVD Media comments here -
Yea I have tried multiple DVD+R media to no avail. I just tried a DVD-R and it appeared to work. Problem is I have already copied over 35 of my movies onto DVD+R and don't wish to reburn them all over again. My Philips is my bedroom DVD and I normally watch DVD's in the living room with my Samsung. It can read both formats with no problems. The Philips states that it can read +R with no issues.
Is there a firmware or other option that could be explored? -
Before I burnt 35 movies over I'd go get another DVD player for 39 bucks at Wal-Mart.
But do they all have over 4 GB's on the discs ? Try a +RW with 4.2 gigs or so on it and check it out. All these other people can't be doing too many things different than you are. -
Originally Posted by jtommyj
mine doesn't seem to want to play DVD+R (tried countless times...different firmware upgrades, different media, etc...) and
any DVDs (to be playable) for some reason MUST be at least 4GB
Remote control sucks!!
other than that, been very satisfied...(when I bought this player I paid almost $200 for it, and it was one of the cheaper ones at the store...)
the main reason i originally purchased this particular player was the multiple outputs: the two composite audio/video (one to surround sound stereo system-one to computer capture card) component outputs (in case I need 'em) and S-Video; Coax and Optical sound outputs
-
I have a DVD950 (similar hardware) and I sent it to philips support center to upgrade the step motor firmware.
Now, it reads everything and everybrand. -
I also have a Philips DVD711 and burned a sesong of simpsons in .mpg.
Used Nero 6 and burned a DVD-Video on a DVD+R CD but i couldnt play it on the DVD-player.
Do i need to rip the .mpg files or something to make it work? Im a newbie, have only own a DVD-writer for 1 day.
Please describe the way i must go to make it work, i have also one DVD-R so i can test it. -
Originally Posted by rajalev
thanks
-ty1er -
I know it's kinda off-topic, but updating the firmware resets the region-free and original region status of my DVD711?
I live in Brazil (region 4) and I don't know how it was unlocked, since I bought it done.
Is v7.27 recommendable despite this reported Memorex problem?
Thanks!
Similar Threads
-
Can Philips 5990 firmware be used on Philips 5992 Dvd Player
By peggypwr1 in forum Newbie / General discussionsReplies: 2Last Post: 23rd Mar 2010, 16:06 -
DVD Decrypter Not Reading Devices
By JoRodd in forum DVD RippingReplies: 4Last Post: 14th Apr 2009, 13:33 -
Error Reading by GOM and Media Player Classic in reading MKV video
By cutefix in forum Software PlayingReplies: 1Last Post: 31st Mar 2009, 00:25 -
Reading non-finalized DVD's?
By Noiseworker in forum Authoring (DVD)Replies: 9Last Post: 7th Jan 2009, 18:37 -
Reading a physically cracked dvd
By Starman* in forum Newbie / General discussionsReplies: 1Last Post: 16th Mar 2008, 13:00