I thought I had successfully converted a .mov file to an mpeg1 file by using the mpeg2enc option using v0.0.7d: MPEG1[.MPG](mpeg2enc)
But when I try to open the resultant .mpg file (one of three files: .m1v, .mp2, and .mpg), I get this error:
"Couldn't open the file xxx.mpg because a software component needed by the movie could not be found."
It doesn't seem that there was any error in the encoding log, which follows:
[Heidi-iBook:~] heidi% pbpaste | sh
Encoding started on Thu Aug 21 15:10:33 PDT 2003
++ WARN: [mpeg2enc] Generating dummy SVCD scan-data offsets to be filled in by "vcdimager"
++ WARN: [mpeg2enc] If you're not using vcdimager you may wish to turn this off using -d
++ WARN: [mpeg2enc] Frame height won't split into two equal field pictures...
++ WARN: [mpeg2enc] forcing encoding as progressive video
INFO: Opened WAV file, freq = 48000 Hz, channels = 2, bits = 16
INFO: format = 0x1, audio length = 341744744 bytes
INFO: slots/frame = 672
INFO: frac SpF=0.000, tot bitrate=224 kbps, s freq=48.0 kHz
INFO: System is big endian
INFO: Avg slots/frame = Inf; b/smp = Inf; br = Inf kbps
INFO: Encoding with psychoacoustic model 2 is finished
INFO: The MPEG encoded output file name is "/Users/heidi/Movies/Air 260/Air260generic.mp2"
INFO: [mplex] mplex version 2.2.1 ($Date: 2002/04/20 19:08:30 $)
INFO: [mplex] File /Users/heidi/Movies/Air 260/Air260generic.m1v looks like an MPEG Video stream.
INFO: [mplex] File /Users/heidi/Movies/Air 260/Air260generic.mp2 looks like an MPEG Audio stream.
INFO: [mplex] Found 1 video streams 1 MPEG audio streams and 0 AC3 streams
INFO: [mplex] Selecting SVCD output profile
INFO: [mplex] Scanning for header info: Video stream e0 (/Users/heidi/Movies/Air 260/Air260generic.m1v)
INFO: [mplex] VIDEO STREAM: e0
INFO: [mplex] Frame width : 352
INFO: [mplex] Frame height : 240
INFO: [mplex] Aspect ratio : 4:3 display
INFO: [mplex] Picture rate : 29.970 frames/sec
INFO: [mplex] Bit rate : 2500000 bits/sec
INFO: [mplex] Vbv buffer size : 229376 bytes
INFO: [mplex] CSPF : 0
INFO: [mplex] Scanning for header info: Audio stream c0 (/Users/heidi/Movies/Air 260/Air260generic.mp2)
INFO: [mplex] AUDIO STREAM:
INFO: [mplex] Audio version : 1.0
INFO: [mplex] Layer : 2
INFO: [mplex] CRC checksums : no
INFO: [mplex] Bit rate : 28672 bytes/sec (224 kbit/sec)
INFO: [mplex] Frequency : 48000 Hz
INFO: [mplex] Mode : 0 stereo
INFO: [mplex] Mode extension : 0
INFO: [mplex] Copyright bit : 0 no copyright
INFO: [mplex] Original/Copy : 0 copy
INFO: [mplex] Emphasis : 0 none
INFO: [mplex] SYSTEMS/PROGRAM stream:
INFO: [mplex] rough-guess multiplexed stream data rate : 2780000
INFO: [mplex] target data-rate specified : 2788800
INFO: [mplex] Setting specified specified data rate: 2788800
INFO: [mplex] Sectors = 78 Video delay = 46800 Audio delay = 46800
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 235520 frame=000000 sector=00000000
INFO: [mplex] Audio c0: buf= 4096 frame=000000 sector=00000000
INFO: [mplex] Scanned to end AU 53351
INFO: [mplex] STREAM e0 completed @ 53351.
INFO: [mplex] STREAM c0 completed @ 74162.
INFO: [mplex] Multiplex completion at SCR=160231800.
INFO: [mplex] Video e0: buf= 155367 frame=053351 sector=00218176
INFO: [mplex] Audio c0: buf= 2080 frame=074162 sector=00021707
INFO: [mplex] VIDEO_STATISTICS: e0
INFO: [mplex] Video Stream length: 62192449 bytes
INFO: [mplex] Sequence headers: 3576
INFO: [mplex] Sequence ends : 1
INFO: [mplex] No. Pictures : 53352
INFO: [mplex] No. Groups : 3576
INFO: [mplex] No. I Frames : 3576 avg. size 15053 bytes
INFO: [mplex] No. P Frames : 14230 avg. size 10972 bytes
INFO: [mplex] No. B Frames : 35546 avg. size 8090 bytes
INFO: [mplex] No. D Frames : 0 avg. size 0 bytes
INFO: [mplex] Average bit-rate : 2236000 bits/sec
INFO: [mplex] Peak bit-rate : 2475200 bits/sec
INFO: [mplex] BUFFERING min 15 Buf max 176014
INFO: [mplex] AUDIO_STATISTICS: c0
INFO: [mplex] Audio stream length 49837536 bytes.
INFO: [mplex] Syncwords : 74163
INFO: [mplex] Frames : 74163 padded
INFO: [mplex] Frames : 0 unpadded
INFO: [mplex] BUFFERING min 67 Buf max 683
INFO: [mplex]
INFO: [mplex] MUX STATUS: no under-runs detected.
Encoding completed on Thu Aug 21 18:36:41 PDT 2003
I'm trying to get the .mov file to encode to mpeg-1 because it needs to be accessible by Windows Media Player users (quicktime not allowed to be installed on computers). Am I deranged for wanting to do this? Or even just mistaken in thinking I have to go all the way back to mpeg-1 anymore?
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 2 of 2
Thread
-
heidiDidyGuest
-
It seems like you selected the SVCD preset and then changed to mpeg-1 codec. Select the VCD preset instead.
Similar Threads
-
DVD "no signal" with component connection
By medic in forum Authoring (DVD)Replies: 9Last Post: 14th Sep 2015, 17:20 -
AVIAddXSubs "movie-name.avi" not found
By ydobpbkwds in forum SubtitleReplies: 4Last Post: 2nd Dec 2011, 15:00 -
Developers! I need!:"Record Freeview Directly to SDHC Card Device?&quo
By raverscout in forum Newbie / General discussionsReplies: 1Last Post: 5th Oct 2009, 01:34 -
someone suggest screen capture software to make a "movie"
By graysky in forum Newbie / General discussionsReplies: 2Last Post: 13th Jan 2008, 05:08 -
Philips DVP5960 - firmware "upgrade" to fix jerky video is a &quo
By tzikeh in forum DVD & Blu-ray PlayersReplies: 13Last Post: 18th Nov 2007, 14:47