VideoHelp Forum

Our website is made possible by displaying online advertisements to our visitors. Consider supporting us by disable your adblocker or Try ConvertXtoDVD and convert all your movies to DVD. Free trial ! :)
+ Reply to Thread
Results 1 to 11 of 11
Thread
  1. Guest
    Burnt a DVD, with VCD films.

    1st bin/cue 2 chapters
    2nd mpg
    3rd bin/cue 3 chapters

    1st and 3rd play fine, 2nd (title 2) after about 20 seconds jumps to new 3rd VCG.

    If you forward though it, you can go though the whole film, however soon as you press play, 20 seconds ish later you loose film again.

    Any ideas what could cause/caused that effect ?
    Quote Quote  
  2. hard2handle
    Guest
    I have the same problem.

    have start an session with 4 vcds / svcds and an men...

    i can choose the film in the option men and than the movie hang after 20 - 30 seconds..... but i can jump to the next chapters around the dvd.....


    this happends on 2 dvd players

    Sony DVP-S 335
    Pioneer DV-444

    than i gave an very cheap model an try...
    on this player .. the dvd run without problems.....


    now i test the same with the Pan & scan option ....
    maby after this the dvd work on my pioneer.....




    someone have an idea ?



    sorry the bad english
    Quote Quote  
  3. hey,

    I can't try it for you cause my version of 1.5 isn't working.. But you might want to skip addind chapters and see what happens

    Greatings,
    Yf
    Quote Quote  
  4. hard2handle
    Guest
    i gave the chapter skip an try..... post later if it works
    Quote Quote  
  5. Member ChrissyBoy's Avatar
    Join Date
    Feb 2003
    Location
    Yorkshire!
    Search Comp PM
    yf2001usa: whats your issue?
    SVCD2DVD v2.5, AVI/MPEG/HDTV/AviSynth/h264->DVD, PAL->NTSC conversion.
    VOB2MPG PRO, Extract mpegs from your DVDs - with you in control!
    Quote Quote  
  6. dd-
    Guest
    I have a pioneer dv-c503 and have the same problem when buring 4 vts (4 vcd's) into one dvd. I tried to burn 1 vcd into a dvd just to check that my player will work with dvcd's(it worked). I used svcd2dvd+ for both trials. I will try and burn using version 1.5 and give you guys a update....Still It is very exciting new software with great support from likeminded people.
    Quote Quote  
  7. Member ChrissyBoy's Avatar
    Join Date
    Feb 2003
    Location
    Yorkshire!
    Search Comp PM
    Can anyone confirm whether this is just with VCDs or just SVCDs or only when combining?
    SVCD2DVD v2.5, AVI/MPEG/HDTV/AviSynth/h264->DVD, PAL->NTSC conversion.
    VOB2MPG PRO, Extract mpegs from your DVDs - with you in control!
    Quote Quote  
  8. Guest
    Most of you dvd players wont play patched vcd/svcd DVD....
    I have give the program an try... but on my 2 dvd players my dvd wont work.... but on to other the dvd work without problems.....


    but an relaay problem is the async with mvcds.
    after the sound changeing from ssvcd2dvd many mvcds are async..

    someone know whats up with this point ?
    Quote Quote  
  9. Member ChrissyBoy's Avatar
    Join Date
    Feb 2003
    Location
    Yorkshire!
    Search Comp PM
    async:
    Look at the sticky post: Installation & Common Issues (including AV sync)
    SVCD2DVD v2.5, AVI/MPEG/HDTV/AviSynth/h264->DVD, PAL->NTSC conversion.
    VOB2MPG PRO, Extract mpegs from your DVDs - with you in control!
    Quote Quote  
  10. Guest
    tried again using version 1.5 using 5 vcd's (some pal some ntsc). result was disappointing. it played good in my computers 2 different dvd's but did not work in my standalone pioneer CD player. picture would lock up after a few seconds. probably for the better, the compilation I was making was a bunch of cartoons for my kid..he already watches to much t.v. I will try again tonight with the 'pan and scan' button checked and see if that works.
    Quote Quote  
  11. Originally Posted by Guest
    tried again using version 1.5 using 5 vcd's (some pal some ntsc). result was disappointing. it played good in my computers 2 different dvd's but did not work in my standalone pioneer CD player. picture would lock up after a few seconds. probably for the better, the compilation I was making was a bunch of cartoons for my kid..he already watches to much t.v. I will try again tonight with the 'pan and scan' button checked and see if that works.
    **did not realize I was logged on as guest.. **
    Quote Quote  



Similar Threads