VideoHelp Forum

Our website is made possible by displaying online advertisements to our visitors. Consider supporting us by disable your adblocker or Try ConvertXtoDVD and convert all your movies to DVD. Free trial ! :)
+ Reply to Thread
Results 1 to 5 of 5
Thread
  1. Guest
    Ok so I have a .mov file I want to make a VCD out of, so I go to encode it and everything is working fine, a .m1v and .mp2 file pops up.. then a few minutes later I get an error:

    INFO: [mplex] mplex version 2.2.1 ($Date: 2002/04/20 19:08:30 $)
    INFO: [mplex] File /Volumes/WINDOZE/SMpromoVCD.m1v looks like an MPEG Video stream.
    INFO: [mplex] File /Volumes/WINDOZE/SMpromoVCD.mp2 looks like an MPEG Audio stream.
    INFO: [mplex] Found 1 video streams 1 MPEG audio streams and 0 AC3 streams
    INFO: [mplex] Selecting VCD output profile
    INFO: [mplex] Scanning for header info: Video stream e0 (/Volumes/WINDOZE/SMpromoVCD.m1v)
    INFO: [mplex] VIDEO STREAM: e0
    INFO: [mplex] Frame width : 720
    INFO: [mplex] Frame height : 480
    INFO: [mplex] Aspect ratio : 1:1.1250 (4:3 NTSC for 720x480/352x240 images)
    INFO: [mplex] Picture rate : 29.970 frames/sec
    INFO: [mplex] Bit rate : 1152000 bits/sec
    INFO: [mplex] Vbv buffer size : 40960 bytes
    INFO: [mplex] CSPF : 0
    INFO: [mplex] Scanning for header info: Audio stream c0 (/Volumes/WINDOZE/SMpromoVCD.mp2)
    INFO: [mplex] AUDIO STREAM:
    INFO: [mplex] Audio version : 1.0
    INFO: [mplex] Layer : 2
    INFO: [mplex] CRC checksums : no
    INFO: [mplex] Bit rate : 28672 bytes/sec (224 kbit/sec)
    INFO: [mplex] Frequency : 44100 Hz
    INFO: [mplex] Mode : 0 stereo
    INFO: [mplex] Mode extension : 0
    INFO: [mplex] Copyright bit : 0 no copyright
    INFO: [mplex] Original/Copy : 0 copy
    INFO: [mplex] Emphasis : 0 none
    INFO: [mplex] SYSTEMS/PROGRAM stream:
    INFO: [mplex] rough-guess multiplexed stream data rate : 1412000
    INFO: [mplex] target data-rate specified : 1411200
    ++ WARN: [mplex] Target data rate lower than computed requirement!
    ++ WARN: [mplex] N.b. a 20% or so discrepancy in variable bit-rate
    ++ WARN: [mplex] streams is common and harmless provided no time-outs will occur
    INFO: [mplex] Sectors = 18 Video delay = 21600 Audio delay = 21600
    INFO: [mplex] New sequence commences...
    INFO: [mplex] Video e0: buf= 47104 frame=000000 sector=00000000
    INFO: [mplex] Audio c0: buf= 4096 frame=000000 sector=00000000
    INFO: [mplex] Padding : sector=00000000
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=531600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 38544 frame=000158 sector=00000280
    ++ WARN: [mplex] Audio c0: buf= 2978 frame=000202 sector=00000065
    ++ WARN: [mplex] Padding : sector=00000066
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=891600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 44799 frame=000276 sector=00000531
    ++ WARN: [mplex] Audio c0: buf= 3216 frame=000355 sector=00000114
    ++ WARN: [mplex] Padding : sector=00000066
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=1251600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 44799 frame=000394 sector=00000776
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=000504 sector=00000162
    ++ WARN: [mplex] Padding : sector=00000073
    ++ WARN: [mplex] Stream c0: data will arrive too late sent(SCR)=1611600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 47104 frame=000498 sector=00001033
    ++ WARN: [mplex] Audio c0: buf= 1817 frame=000638 sector=00000205
    ++ WARN: [mplex] Padding : sector=00000073
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=1971600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 44808 frame=000624 sector=00001282
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=000797 sector=00000256
    ++ WARN: [mplex] Padding : sector=00000073
    ++ WARN: [mplex] Stream c0: data will arrive too late sent(SCR)=2331600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 47104 frame=000736 sector=00001535
    ++ WARN: [mplex] Audio c0: buf= 1817 frame=000944 sector=00000303
    ++ WARN: [mplex] Padding : sector=00000073
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=2691600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 44799 frame=000838 sector=00001794
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001071 sector=00000344
    ++ WARN: [mplex] Padding : sector=00000073
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=3051600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 44799 frame=000965 sector=00002042
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001233 sector=00000396
    ++ WARN: [mplex] Padding : sector=00000073
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=3411600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 44799 frame=001081 sector=00002294
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001383 sector=00000444
    ++ WARN: [mplex] Padding : sector=00000073
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=3771600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 44799 frame=001214 sector=00002540
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001551 sector=00000498
    ++ WARN: [mplex] Padding : sector=00000073
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=4131600 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 44803 frame=001337 sector=00002790
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001707 sector=00000548
    ++ WARN: [mplex] Padding : sector=00000073
    **ERROR: [mplex] Too many frame drops -exiting


    Then it stops, but it already made the full .m1v and mp2 files... So I went to the tools tab in ffmpegX and under video tools I put in the .m1v and the .mp2 and press Mux as... VCD. It starts to encode and then I get the same error as before... data will arrive too late sent(SCR)=4131600 required(DTS)=0

    So what am I doing wrong? Since I already have the full .m1v and .mp2 files is thier a easy way of making them into a VCD? Thanks in advance to anyone with any help or suggestions.
    Quote Quote  
  2. Your streams doesn't seem VCD compliant, so you should mux them as XVCD.
    Quote Quote  
  3. Guest
    Hey thanks for the reply.. I tryed xvcd and got pretty much the same error...

    INFO: [mplex] mplex version 2.2.1 ($Date: 2002/04/20 19:08:30 $)
    INFO: [mplex] File /Volumes/WINDOZE/SMpromoVCD.m1v looks like an MPEG Video stream.
    INFO: [mplex] File /Volumes/WINDOZE/SMpromoVCD.mp2 looks like an MPEG Audio stream.
    INFO: [mplex] Found 1 video streams 1 MPEG audio streams and 0 AC3 streams
    INFO: [mplex] Selecting VCD output profile
    INFO: [mplex] Scanning for header info: Video stream e0 (/Volumes/WINDOZE/SMpromoVCD.m1v)
    INFO: [mplex] VIDEO STREAM: e0
    INFO: [mplex] Frame width : 720
    INFO: [mplex] Frame height : 480
    INFO: [mplex] Aspect ratio : 1:1.1250 (4:3 NTSC for 720x480/352x240 images)
    INFO: [mplex] Picture rate : 29.970 frames/sec
    INFO: [mplex] Bit rate : 1152000 bits/sec
    INFO: [mplex] Vbv buffer size : 40960 bytes
    INFO: [mplex] CSPF : 0
    INFO: [mplex] Scanning for header info: Audio stream c0 (/Volumes/WINDOZE/SMpromoVCD.mp2)
    INFO: [mplex] AUDIO STREAM:
    INFO: [mplex] Audio version : 1.0
    INFO: [mplex] Layer : 2
    INFO: [mplex] CRC checksums : no
    INFO: [mplex] Bit rate : 28672 bytes/sec (224 kbit/sec)
    INFO: [mplex] Frequency : 44100 Hz
    INFO: [mplex] Mode : 0 stereo
    INFO: [mplex] Mode extension : 0
    INFO: [mplex] Copyright bit : 0 no copyright
    INFO: [mplex] Original/Copy : 0 copy
    INFO: [mplex] Emphasis : 0 none
    INFO: [mplex] SYSTEMS/PROGRAM stream:
    INFO: [mplex] rough-guess multiplexed stream data rate : 1412000
    INFO: [mplex] Setting best-guess data rate.
    INFO: [mplex] Sectors = 32 Video delay = 38378 Audio delay = 38378
    INFO: [mplex] New sequence commences...
    INFO: [mplex] Video e0: buf= 94208 frame=000000 sector=00000000
    INFO: [mplex] Audio c0: buf= 4096 frame=000000 sector=00000000
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=1282073 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 83929 frame=000402 sector=00000804
    ++ WARN: [mplex] Audio c0: buf= 3284 frame=000514 sector=00000165
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=1641869 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 91907 frame=000514 sector=00001058
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=000657 sector=00000211
    ++ WARN: [mplex] Stream c0: data will arrive too late sent(SCR)=2001665 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 94208 frame=000635 sector=00001308
    ++ WARN: [mplex] Audio c0: buf= 1817 frame=000813 sector=00000261
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=2361461 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 91903 frame=000748 sector=00001562
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=000956 sector=00000307
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=2721257 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 91903 frame=000849 sector=00001820
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001087 sector=00000349
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=3081053 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 91907 frame=000979 sector=00002067
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001252 sector=00000402
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=3440849 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 91903 frame=001093 sector=00002320
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001399 sector=00000449
    ++ WARN: [mplex] Stream c0: data will arrive too late sent(SCR)=3800645 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 94208 frame=001227 sector=00002565
    ++ WARN: [mplex] Audio c0: buf= 1817 frame=001570 sector=00000504
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=4160441 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 91907 frame=001348 sector=00002816
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001723 sector=00000553
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=4520237 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 91912 frame=001467 sector=00003067
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=001875 sector=00000602
    ++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=4880033 required(DTS)=0
    ++ WARN: [mplex] Video e0: buf= 91912 frame=001578 sector=00003322
    ++ WARN: [mplex] Audio c0: buf= 4096 frame=002015 sector=00000647
    **ERROR: [mplex] Too many frame drops -exiting


    I'm not any type of pro when it comes to video, but shouldn't a basic NTSC 29.97fps .mov file that I made in final cut pro be vcd compliant? I dunno any help is very much appreciated. Thanks!
    Quote Quote  
  4. If you can upload your clips to some web space so as I can download them, I'll try to test and let you know.
    Quote Quote  
  5. SpiffySJ
    Guest
    I have a similar set of error messages when trying to convert an 800 MB high quality .MOV from iMovie to an MPEG 2. Were you able to figure out a solution to his problem?

    Thanks!

    -Shawn
    Quote Quote  



Similar Threads