VideoHelp Forum
+ Reply to Thread
Results 1 to 5 of 5
Thread
  1. i have buy the new Plextor PX-708A and the Sony DVD+R (DPR120N2) but i have a problem with final burning, i use Nero 6 (6.0.0.15). what can i do?
    here the Log report from Nero 6:

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 13:06:00
    ahead WinASPI: File 'C:\Programme\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17.06.2003 15:25:04
    Nero Version: 6.0.0.15
    Recorder: <PLEXTOR DVDR PX-708A> Version: 1.01 - HA 1 TA 1 - 6.0.0.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TOSHIBA DVD-ROM SD-M1612>Version: 1004 - HA 1 TA 0 - 6.0.0.15
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1800JB-00DUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD1000BB-32CCB0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a axwhisky Port 2 ID 0 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a axwhisky Port 2 ID 1 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a axwhisky Port 2 ID 2 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a axwhisky Port 2 ID 3 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a axwhisky Port 2 ID 4 DMA: Off

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-M1612 L: CDRom0
    PLEXTOR DVDR PX-708A M: CDRom1
    AXV CD/DVD-ROM N: CDRom2
    AXV CD/DVD-ROM O: CDRom3
    AXV CD/DVD-ROM P: CDRom4
    AXV CD/DVD-ROM Q: CDRom5
    AXV CD/DVD-ROM R: CDRom6
    =======================

    AutoRun : 0
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523800kB)
    Free physical memory: 249MB (255084kB)
    Memory in use : 51 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.10.2003
    UDF/ISO Zusammenstellung
    19:39:00 #1 Phase 112 File dlgbrnst.cpp, Line 1843
    DVD-Video files reallocation started

    19:39:00 #2 Phase 114 File dlgbrnst.cpp, Line 1843
    DVD-Video files reallocation completed (no file modified)

    19:39:00 #3 Text 0 File Isodoc.cpp, Line 5878
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    19:39:00 #4 Phase 111 File dlgbrnst.cpp, Line 1843
    DVD-Video files sorted

    19:39:00 #5 Text 0 File Reader.cpp, Line 118
    Reader running

    19:39:00 #6 Text 0 File Writer.cpp, Line 127
    Writer PLEXTOR DVDR PX-708A running

    19:39:00 #7 ISO9660GEN -11 File geniso.cpp, Line 3861
    First writeable address = 0 (0x00000000)

    19:39:00 #8 ISO9660GEN -11 File geniso.cpp, Line 3861
    First writeable address = 0 (0x00000000)

    19:39:00 #9 Text 0 File Burncd.cpp, Line 3168
    Turn on Disc-at-Once, using DVD media

    19:39:01 #10 Text 0 File DlgWaitCD.cpp, Line 230
    Last possible write address on media: 2295103 (510:01.28)
    Last address to be written: 1228063 (272:54.13)

    19:39:01 #11 Text 0 File DlgWaitCD.cpp, Line 235
    Write in overburning mode: FALSE

    19:39:01 #12 Text 0 File DlgWaitCD.cpp, Line 1885
    Recorder: PLEXTOR DVDR PX-708A, Media type: DVD+R

    19:39:01 #13 Text 0 File DlgWaitCD.cpp, Line 393
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19:39:01 #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1228064 (1228064) = #1228064/272:54.14
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1228064 blocks [PLEXTOR DVDR PX-708A ]
    --------------------------------------------------------------

    19:39:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
    Prepare recorder [PLEXTOR DVDR PX-708A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 2515382272, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1228064 | lead-out | 1 | 0x00 | 0x41

    19:39:01 #16 Phase 24 File dlgbrnst.cpp, Line 1843
    Caching of files started

    19:39:01 #17 Phase 25 File dlgbrnst.cpp, Line 1843
    Caching of files completed

    19:39:01 #18 Phase 28 File dlgbrnst.cpp, Line 1843
    Speed measurement started

    19:39:01 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:49:01 #20 Text 0 File WriterStatus.cpp, Line 113
    <PLEXTOR DVDR PX-708A > start writing Lead-Out at LBA 1228064 (12BD20h), lenght 0 blocks

    19:49:01 #21 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    19:49:01 #22 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    19:49:01 #23 Phase 29 File dlgbrnst.cpp, Line 1793
    Speed measurement completed: 51,7x (71.346 KB/s)

    19:49:01 #24 Text 0 File Burncd.cpp, Line 4131
    Es kann nur mit 2x anstatt 4x geschrieben werden,

    da die Geschwindigkeit der Datenquelle zu gering ist.

    19:49:01 #25 Phase 36 File dlgbrnst.cpp, Line 1843
    Burn process started at 2,4x (3.312 KB/s)

    19:49:01 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2136
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19:49:01 #27 SCSI -1066 File Cdrdrv.cpp, Line 1203
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02E95000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    19:49:01 #28 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 13:12,342 (792342ms) -> OK

    19:49:01 #29 Text 0 File DVDPlusRW.cpp, Line 555
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    20:01:49 #30 Text 0 File WriterStatus.cpp, Line 113
    <PLEXTOR DVDR PX-708A > start writing Lead-Out at LBA 1228064 (12BD20h), lenght 0 blocks

    20:01:49 #31 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    20:01:49 #32 SCSI -1067 File Cdrdrv.cpp, Line 1203
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x26 0x00

    20:01:49 #33 SCSI -1176 File Cdrdrv.cpp, Line 1203
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x04
    CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x04

    20:01:49 #34 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    20:01:49 #35 CDR -1067 File ThreadedTransferInterface.cpp, Line 1626
    Invalid field in parameter
    PLEXTOR DVDR PX-708A\H1 T1

    20:01:49 #36 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1626
    Could not perform end of Disc-at-once

    20:01:49 #37 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    20:01:49 #38 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    20:01:49 #39 Phase 38 File dlgbrnst.cpp, Line 1843
    Burn process failed at 2,4x (3.312 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 13:06:00
    File 'Drivers\PXHELP20.SYS': Ver=2.02.53a, size=17136 bytes, created 04.10.2003 22:54:20 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29.08.2002 01:27:50 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    Quote Quote  
  2. Nero 6.0.0.15 is not working with the Plextor and DVD+R media. Get 6.0.0.11 instead.
    Quote Quote  
  3. thank you, i have make a Firmware Update to 1.02 and Nero 6 (6.0.0.11) and DVD+R working now
    Quote Quote  
  4. Member
    Join Date
    Oct 2003
    Location
    Midwest USA
    Search Comp PM
    Originally Posted by Scoty
    thank you, i have make a Firmware Update to 1.02 and Nero 6 (6.0.0.11) and DVD+R working now
    Where is firmware 1.02? Newest I can find is 1.01.

    peace.
    unloaded
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!