Hi,
After an extensive search for the drivers for this card, I have given up. I am turning to a couple of forums and see if anyone can help me locate what I need.
I have a Harris XD-200 video card that I am trying to test. I cannot find the drivers. I even searched for the hardware ID under Windows to no avail.
Here is the information on the card:
Harris XD-200
9400-0956-01 Rev E
This was pulled from a working Harris IconStation. I have a hard drive that has the G-Scribe program that this card works with, but I cannot find the drivers in there because I can't even identify the card in the hardware profile. If I install the card in an XP, Vista, or Windows 7 computer, it shows up as an Unknown Device video card. The card has 5 BNC connectors on the back labeled PGM-IN, PGM-OUT, KEY-IN, KEY-OUT, REF-IN. There is also a supplementary sound card hooked through a ribbon cable with 6 BNC connectors labeled CH 1/2 IN, CH 1/2 OUT, CH 3/4 IN, CH 3/4 OUT, LTC IN, LTC OUT.
If anyone has any ideas on where to find the drivers for this, it would be GREATLY appreciated!
Thanks
Mike
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 8 of 8
Thread
-
-
Here is a little more information....the hard drive that will detect these cards has RTX 1.1. I downloaded RTX 1.4 but it won't detect the card. I am guessing this is because I don't have a USB serial numbered drive....
But that is only a guess. -
is this the card you have ?? - http://www.ebay.com/itm/Harris-XD-200-Video-Board-9400-0956-01-Rev-E-w-Audio-paddle-bo...-/331680850696
-
Yes. That is the exact same board.
Any idea where to get a driver for this thing?
I can't update the firmware to 1.4 because 1.4 can't see it because there is no driver loaded. The 1.1 software will see it, but I have to uninstall 1.1 to update it to 1.4 and I am hesitant to do that because at least 1.1 acknowledges the card.
Mike -
-
Yep. Got them.
I might have figured out the issue. I don't think the install program is too compatible with Windows 7. I just installed WinXP on a hard drive and ran the Inscriber program and it found the video card right off the bat. I tried to reinstall under Win7 in XP Compatibility Mode and it wouldn't detect the card. -
That was the issue. I just installed 1.4 on a clean XP hard drive, I was able to update the firmware on the XD-200 and now it shows up in the Phoenix Control Panel. I'm messing around with it and trying to see if I can get the thing to run under Win7 in XP Mode or something.
-
hi
hw r u guys
i just want to ask you did you find away to instal XD-200 on win7?
because i have the same problem it's already working on win xp 32 bit but i need to upgrade it.
please if u found how to do it help me.
thank you
Similar Threads
-
What’s the best VHS capture device I can buy with $200?
By nqservices in forum CapturingReplies: 56Last Post: 26th Nov 2015, 08:25 -
200 Kbps good?
By xLeon21 in forum Video Streaming DownloadingReplies: 2Last Post: 8th Nov 2015, 05:00 -
JVC GY-HD 200 and Sony Vegas
By jeffers in forum Camcorders (DV/HDV/AVCHD/HD)Replies: 1Last Post: 24th Dec 2014, 11:07 -
Which shotgun mic around $200?
By yetanotherlogin in forum AudioReplies: 10Last Post: 20th Jun 2012, 05:04 -
Video editors for up to 200 bucks?
By Sebastian2011 in forum EditingReplies: 8Last Post: 12th Jan 2012, 09:13