Once again, post your complete script and try opening it in VDub both with and without the 'NoLogoAuto(last, logo, 1)' line in the script. If there's an error, post the complete message. No one should have to guess. No one (not I, anyway) knows anything about, or cares anything about, those AvsP messages.
jagabo asked you to test to make sure the source wasn't at fault. Since your video now opens, that part of the script is okay. Your experience points to something going wrong with the use of LogoTools
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 61 to 90 of 121
Thread
-
-
With NoLogoAuto it does not open, without the line opens, but does not remove the logo. Yes, my experience with LogoTools is 0, so much so that I copied this one script above. That is why I preferred that you should make available already the video without logo for download.
This is the script without NoLogoAuto:
LoadPlugin("C:\Users\Amministratore\Downloads\AvsP\LoadPluginEx.dll")
LoadPlugin("C:\Users\Amministratore\Downloads\AvsP \logotools.dll")
LWLibavVideoSource("C:\Users\Amministratore\Videos \The Who My Generation Live 1965 (Reelin' In The Years Archives).mp4")
ConvertToYUY2() # logotools requires yuy2
src=last
logo = ImageSource("C:\Users\Amministratore\Downloads\log o.png").ConvertToYUY2(matrix="rec601").ColorYUV(ga in_y=-45).AssumeFPS(last.framerate).Sharpen(0.5)
src+logo
p1 = src.Trim(0,1030)
p2 = last.Trim(1031,7000)
p3 = src.Trim(7001,0)
p1+p2+p3 -
-
I was using the older LoadPluginEx.dll because Windows wouldn't let me download LoadPluginEx2.dll. But I find that NoLogoAuto() often has problems. Sometimes it scribbles garbage over the logo area. Sometimes only on some frames. And sometimes it locks up in VirtualDub.
One thing that seems to help, although it doesn't really make any sense, is to add the following to the end of the script I gave:
Code:StackHorizontal(src,last) Crop(width/2,0,-0,-0)
-
That's why I couldn't get it to work with this particular video - the delogoed area looked like crap. It just wasn't working correctly. I have never ever seen this problem before. But then I don't often work on downloaded videos either, not that it should make any difference.
-
Here's an example of what I see when it messes up:
[Attachment 40509 - Click to enlarge]
I noticed the video has a mod 2 (486) frame width. But changing it to 480 didn't help. -
Yeah, same thing here. And I tried making it Mod4 (488 using AddBorders) and discovered it changed nothing.
But I'm not going to lose any sleep over it as I have enough screwed up projects of my own to keep me busy. -
A user in this thread had managed to remove the logo, but it has not made me the video available for download.
-
He hasn't completely removed the logo. Did you notice the picture he posted of a frame where it doesn't work? And why should he make it available to you? Are you paying anyone to do the work? Haven't you already been shown how to do it yourself? Didn't the video owner put the logo in it to prevent anyone from getting a good copy of the video?
-
Well, I finally figured out, you can still see a little, but it certainly is better than before. Then I will buy the DVD, then I will not have this problem. Now you could send me a script on how to restore this video? https://www.youtube.com/watch?v=V1LbDGoQrN4
-
You can reduce the logo a bit more by preparing a better logo image with a more perfect black background and more even brightness. You may have to adjust the logo's ColorYUV(gain_y=-45) a bit to compensate.
You can also blur the area of the logo a bit to reduce the remaining garbage. Add these two lines after NoLogoAuto():
Code:logomask = mt_binarize(logo.ConvertToYV12(), 40).mt_expand().Blur(1.0).ConvertToYUY2() Overlay(last, last.Blur(1.0), mask=logomask)
You may need to adjust the mt_binarize() threshold (40 here) depending on the logo image you use. -
Because it's impossible to find the video at a higher quality.
Last edited by ciccioschumacher; 11th Feb 2017 at 09:57.
-
Nothing is going to make that video look good. You seem to like highly over-sharp and over-processed video. So try this:
Code:LWLibavVideoSource("MM.webm") McTemporalDenoise(settings="medium") Sharpen(0.5) nnedi3_rpow2(8, cshift="Spline36Resize", fwidth=1440, fheight=1080) ColorMatrix(mode="rec.601->rec.709")
-
Ok, thank you very much, it worked better than Fred Video script, however, there is still much blocking. Now could you tell me how I can get this effect on my music: https://www.youtube.com/watch?v=p_r7dKNaqBA
-
DId you read the video's description??
Used SRS WOW HD, TruBass, SRS 3D filters
And some tweaking with Audacity to make it perfect.
Personally I find the fake 3D very annoying: it is just an old phase trick, first done back in the 1960s.
However, if you are fond of this, you can also achieve this horrible-sounding audio by using various plugins when you play audio on your computer's media player. If you do it that way, you don't have to spend time remastering any of the audio you own. The "SRS" mentioned in the video's description is a company that makes "SRS Premium Sound" which is shipped with many Dell laptops (I have it). It runs as an "add-on" to your sound-card's software and will therefore give you this effect no matter what media player you use. So, go to the SRS web site and start playing around with their software.Last edited by johnmeyer; 11th Feb 2017 at 18:44. Reason: Changed "code" to "quotes"
-
Yes, the SRS is installed on Windows Media Player, but I would like to apply it to any song for use on mobile phone, iPod and CD.
-
Wherever you got your QTGMC, there's a needed dither package or some other filter you never grabbed. Try and go back to where you got QTGMC and check for the other filters needed to make it work. It may only be needed for the EZDenoise setting.
-
Code:
LWLibavVideoSource("c:\Users\Amministratore\Videos\Formula 1\1952-05-30 Round 02 - Indianapolis 500 Dynamic.avi") McTemporalDenoise(settings="very high") Sharpen(0.5) crop(16,2,-8,-10) nnedi3_rpow2(8, cshift="Spline36Resize", fwidth=640, fheight=480) ColorMatrix(mode="Rec.601->Rec.709")
-
I tried with your script to bring it to 720p, but anyway there is a lot of blocking, and if I remove it too much, it blurs the logo at the bottom "BY AYRTON1". Is there a way to make it a real HD?
-
I don't think you have the slightest idea what real HD is. It'as not just a blurry low-resolution piece of low-grade crap video blown up into a big frame and sharpen it. You already know how to do that. But it won't make this garbage into HD, neither real nor unreal. If a source doesn't start out with high accutance and high resolution, it will never be "HD". It will just be enlarged trash.
The answer to your question is No.- My sister Ann's brother -
Similar Threads
-
Is it possible to restore this video?
By digicube in forum RestorationReplies: 9Last Post: 14th Nov 2015, 20:33 -
Restore Old VHS anime. How ?
By SB4 in forum RestorationReplies: 0Last Post: 14th Nov 2015, 06:03 -
Restore a LD Capture
By angelroj7 in forum RestorationReplies: 7Last Post: 10th Mar 2014, 21:12 -
So Confused, first video wouldn't play, couldn't open to restore, now this.
By Tvillagecs in forum RestorationReplies: 4Last Post: 18th Oct 2013, 17:44 -
Will pay someone to restore/enhance some video I've recorded from VHS.
By daysaf00 in forum RestorationReplies: 1Last Post: 26th Jul 2012, 07:57