Hi Everyone,
I am trying to digitalize the old 8mm tapes. Equipment I am using:
Sony HandyCam CCD-TR411E PAL --> RCA Cables --> EasyCAP --> USB
I managed to capture the input video and sound, but I cannot find the proper setup for the proper video quality.
Since I am living in Central Europe, Hungary, I would assume I need to pick some of the PAL settings from the dropdown.
[Attachment 52979 - Click to enlarge]
I have chosen PAL_D first, the image and the colors are fine, but sometimes (not always) the top of the image is blinking/flickering. Video: https://www.youtube.com/watch?v=wjddNFGks-A
I have tried PAL_N, there everything is fine, except the colors are lost. Video: https://www.youtube.com/watch?v=BvY2wtKckwo
I know that EasyCAP is not providing the best quality, but I would assume that with the right settings you can have something that has colours and not blinking.
Can someone elighten me about what is wrong with this, and what should be the correct settings?
Thanks in advance!
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 11 of 11
Thread
-
-
Pal D would be correct unless the camera had recorded in a Secam variant also common for Eastern Europe. Then you would use Secam-D instead.
But assuming the correct recorded source your issue really is the easycap or easycrap as it is usually referred to around here. -
-
Have you also tried PAL-I or PAL-B/G ?
I use a Haupauge USB Live-2. Their own capture software just has 'PAL' but you can use it with virtualdub to select a PAL variant. -
-
Hello,
Just as a heads up, I have ordered another device, the captured video quality seems to be good with this one. So it was EasyC(r)ap -
-
Want my help? Ask here! (not via PM!)
FAQs: Best Blank Discs • Best TBCs • Best VCRs for capture • Restore VHS -
The latter one I have is this from Aliexpress
This appears as 'ezcap Video Grabber' in the Device Manager and is version 1.0.1.1 from 2013-07-07.
The former one looks like this.
Displays as 'SMI Grabber Device' in Device Manager and is version 1.08.28 from 2011-01-26.
It also says 'Model No. DC-60' on its CD.
As you mentioned the 'version sm 007' I'm quite sure I was googling for information using this term but I cannot recall where I get this from.
After the failure with the first one, I just aimed for ordering a different built up type (even tho it is using the same chip).
Hope this helps. -
Thank you very much ther89. I have a similar easycap device and I think that is a complete garbage, so to anyone who wants to buy a low cost device, please stay away of that models. And of course if you can spend a little more, buy a decent capture (like a hauppauge 610 usb-live 2)
Regards -
In the end, I bought another type of EasyCap from Aliexpress. Everything works properly out of the box with this guy.
[Attachment 63139 - Click to enlarge]
Similar Threads
-
8mm tape no picture except when fast forwarding
By boxcars20 in forum CapturingReplies: 16Last Post: 20th Jan 2020, 23:32 -
LG RH387H with scrambled black and white picture
By WahooHusker in forum DVD & Blu-ray RecordersReplies: 6Last Post: 21st Feb 2019, 21:03 -
DVC100 only captures black and white.
By Videjac in forum CapturingReplies: 25Last Post: 29th Jun 2015, 16:55 -
Black and white intersecting effect
By Mr Chris in forum Newbie / General discussionsReplies: 6Last Post: 18th May 2015, 18:48