AVCHD problems

[dxer1]

hi, so i have two lossless demo trailers 1080p one DTSHDMA and DolbyTrue HD ( both AVCHD original files )and burned to seperate DVD-RW for test using TSMuxer and IMGburn to start with and skipping all the way ( audio and video) in Panasonic BD85 but will play fine in the laptop , any ideas....... btw this is my first post here . : )

[Baldrick]

Maybe crappy dvdrw media. Try another brand or maybe dvdr.

And post the avchd details. Use mediainfo, open m2ts and view->text and post the details.

[dxer1]

baldrick, youll be familiar with these.


General
ID : 0 (0x0)
Complete name : C:\Users\xxxx\Desktop\hd_dts_animated_logo_lossles s-DWEU.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 93.2 MiB
Duration : 22s 50ms
Overall bit rate mode : Variable
Overall bit rate : 35.5 Mbps
Maximum Overall bit rate : 48.0 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : 27
Duration : 21s 355ms
Bit rate mode : Variable
Maximum bit rate : 37.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive

Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Format profile : MA / Core
Mode : 16
Format settings, Endianness : Big
Muxing mode : Stream extension
Codec ID : 134
Duration : 21s 344ms
Bit rate mode : Variable
Bit rate : Unknown / 1 509 Kbps
Channel(s) : 8 channels / 6 channels
Channel positions : Front: L C R, Side: L R, Back: L R, LFE / Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Compression mode : Lossless / Lossy


and.....

General
ID : 0 (0x0)
Complete name : C:\Users\xxxx\Desktop\hd_dolby_catalyst_lossless-DWEU.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 13.0 MiB
Duration : 13s 590ms
Overall bit rate mode : Variable
Overall bit rate : 8 008 Kbps
Maximum Overall bit rate : 48.0 Mbps

Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : VC-1
Format profile : Advanced@L3
Codec ID : 234
Duration : 12s 54ms
Bit rate : 7 234 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.146
Stream size : 10.4 MiB (80%)

Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : TrueHD / AC-3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Muxing mode : Stream extension
Codec ID : 131
Duration : 13s 13ms
Bit rate mode : Variable / Constant
Bit rate : 448 Kbps
Maximum bit rate : 6 336 Kbps
Channel(s) : 8 channels / 6 channels
Channel positions : Front: L C R, Side: L R, Back: L R, LFE / Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 712 KiB (5%)

[poisondeathray]

You need to use BD media (BD25/50) for the 1st one, the bitrates are too high for DVD media.

Maxrate for DVD5/9 media should be kept under 15Mb/s - the physical transfer speed isn't high enough

Panasonic players tend to be very picky on what they will play

[dxer1]

The battle so far, DTSHDMA trailer ..BRRebuilder Full Backup mode output BD5 X265LAVF frameserve ( log indicates indeed 15mb video limit ) this way audio does not convert to AC3 ( keeping original audio ) , done, stop , start TSMuxer load M2TS file from previous operation output as AVCHD disk , done, stop , start IMGBurn and write files and folders to disc in the usual way, done .
BRRebuilder will complete the first task by itself but Panasonic reports " unsupported ".

Dolby TrueHD trailer HDaudio not loading in BRRebuilder . Stop.