long time to burn and extract dvd data disc

[gamemaniaco]

I have an old PC with AMD Duron 1.20Ghz, 480MB DDR RAM, 18GB HDD Seagate 4MB cache PCChips motherboard M810DLU Windows XP Pro 32bit my burner is a Samsung SH-S182F 2MB buffer and burn a data disc of 2.61 GB using the program Imgburn at 4x burning for two hours and to extract all the contents of the disc to the PC is 8 hours


after burning the disc did a scan disk using nero DiscSpeed ​​and no error found


is this normal? why is that? can someone explain me?

my HDD manufacturer Seagate
Hard disk name U Series X 20014
Figure 3.5 "
Capacity after formatted 20 GB
discs 1
Recording Surfaces 1
Physical Dimensions 147.0 x 101.9 x 19.99 mm
Weight 455 g
Rotational latency 5:55 ms
Rotational Speed ​​5400 RPM
Maximum internal transfer coefficient 445 Mbit / s
Average Seek Time 12.7 ms
interface Ultra-ATA/100
Transfer Rate Buffer to host 100 MB / s
Buffer Size 2 MB

[hech54]

Your burner is probably stuck in PIO mode.

[gamemaniaco]

What is this? I understand my HDD is in DMA

[hech54]

Are you going to check to see if your burner was stuck in PIO mode or are you going to talk about your motherboard next?

[Kerry56]

Checking DMA status: http://club.myce.com/f61/troubleshooting-enabling-checking-dma-windows-vista-xp-2000-me-9x-101616/

There are instructions in there for XP.

[gamemaniaco]

how to find this information? My motherboard is a PCChips M810DLU

[gamemaniaco]

My motherboard is PCChips M810DLU and HDD Seagate ST320014A


I have to do?

[Kerry56]

Click on the link I provided in my previous post and read the step by step instructions on how to check if your optical drive is in PIO mode. The instructions for XP are in the middle of that page.

[gamemaniaco]

has nothing in PIO mode


Primary IDE Channel: Device 0 DMA if available, Ultra DMA Mode 5 Device 1 Auto Detect DMA if available


Secondary IDE Channel: Device 0 DMA if available, Ultra DMA Mode 2 Device 1: Automatic detection, DMA if available

[[_chef_]]

No surprise with such an old hdd bugger.
20 GB ....bah!

[gamemaniaco]

I do not think the problem is the HDD because I already used the Satools for DOS on it and no problem detected


as I said before everything is set in DMA and automatic


I realized that the buffer cache my HDD and my DVD recorder is 2MB, slow to burn and extract files on DVD may be because of that?


when recording is stopped and after a while begins to burn and break this happens repeatedly until the desired recording that takes 2 hours to extract all the contents of the disc to the PC is 8 hours