clever FFmpeg-GUI, small FFmpeg UI, fully portable, no installation.

[ProWo]

Once you hide any file or group of files, you cannot add to the hide list.

Unhide, select the streams, hide.

[ProWo]

It worked, but here are some observations.

1. After I added the mp4's to the Batch list for remuxing, I was presented with 150 AAC files in the list that had to either be hidden or removed.
As far as I can tell, there is no way to specify in the batch list a particular file type for selection nor is there a way to re-order the list to put all of the files of a particular type one after another, nor was I able to figure out a way to click on a single file, hold down shift, click on the last file and have all files in between be checked. This mean't I had to find and click all 150 files one by one.

From your description, I think you are referring to the Multiplex page and not the Batch Tasks page.
- To select streams, you can use the All/none/First button.
- You can also select/deselect streams by type (processed, source, added) clicking on the colored rectangles top right.
- You can reorder single streams, changing her idx an clicking on swap button.

2. I made a mistake and included a file that I should not have. The program detected the error and brought up a notification box. After clicking on the OK button of the notification box, all of the selected (checked) files were automatically unchecked meaning I had to start from scratch selecting the 150 files to remove or hide.

See above.

3. After remxuing, all of the newly created AC-3 files are deleted automatically. If I made a mistake, I would have to re-create all or some of them. Could you provide an option to not delete them?

You can change this behavior, selecting Clear selected rows (top right). This way, the entries are removed after muxing, but the files are kept.

[ProWo]

Would it also make sense to add "Fast start" and "Global title" (when it is selected) for Simple remux?
So you could also batch fast start or remove or set a global title for multiple files.

This is problematic, because fast start works only with mp4/mov.
There are also container restrictions for global title.

[Findu]

@NewTwoVideo

EDIT: Sorry. I didn't see ProWo's reply! Maybe it will help anyway?

Options for manipulating the grid on the Multiplex page:


[Attachment 90670 - Click to enlarge]

---

If you want to change the audio in many media files and keep the video and the modified audio stream (all processed streams need to have the same stream index #), you can do the following:
- Load one of the files as the source, go to Extract Streams and select only the video stream, click To Batch and select Container (to creates separate, untouched streams for further multiplexing).
- Open Batch Tasks, where this extraction task is now at the top of the list, drag and drop all the remaining media files at once, and click Execute.
- Open Audio Encoding, set the desired changes, and click To Batch.
- Open Batch Task, where this audio encoding task is now at the top, drag and drop all the remaining media files at once, and click Execute.
- Open Multiplex, click on the column header Filemane to sort the list and bring the blue source streams to the top. Select only the blue source streams and hide them. Make your selections for Other Settings and Container. Click on "Mux whole grid" and confirm with OK. Then click on Multiplex and wait until all streams have been processed.
Done!

[NewTwoVideo]

Once you hide any file or group of files, you cannot add to the hide list.

Unhide, select the streams, hide.

Ah, I did not realize it kept the checkboxes kept when unhiding.
My mistake.
Thanks.

[NewTwoVideo]

I sent you a PM to illustrate what I am trying to explain.
I hope that it is more clear than my post.

It worked, but here are some observations.

1. After I added the mp4's to the Batch list for remuxing, I was presented with 150 AAC files in the list that had to either be hidden or removed.
As far as I can tell, there is no way to specify in the batch list a particular file type for selection nor is there a way to re-order the list to put all of the files of a particular type one after another, nor was I able to figure out a way to click on a single file, hold down shift, click on the last file and have all files in between be checked. This mean't I had to find and click all 150 files one by one.

From your description, I think you are referring to the Multiplex page and not the Batch Tasks page.
- To select streams, you can use the All/none/First button.
- You can also select/deselect streams by type (processed, source, added) clicking on the colored rectangles top right.
- You can reorder single streams, changing her idx an clicking on swap button.

2. I made a mistake and included a file that I should not have. The program detected the error and brought up a notification box. After clicking on the OK button of the notification box, all of the selected (checked) files were automatically unchecked meaning I had to start from scratch selecting the 150 files to remove or hide.

See above.

3. After remxuing, all of the newly created AC-3 files are deleted automatically. If I made a mistake, I would have to re-create all or some of them. Could you provide an option to not delete them?

You can change this behavior, selecting Clear selected rows (top right). This way, the entries are removed after muxing, but the files are kept.

[Findu]

Would it also make sense to add "Fast start" and "Global title" (when it is selected) for Simple remux?
So you could also batch fast start or remove or set a global title for multiple files.

This is problematic, because fast start works only with mp4/mov.
There are also container restrictions for global title.

Yes, of course. I mean, only if the option is available and only if it is selected, it will be inserted into the Simple remux command line to batch.

[ProWo]

Yes, of course. I mean, only if the option is available and only if it is selected, it will be inserted into the Simple remux command line to batch.

Let's assume you get a video with both options available and create a batch task.
Now, in batch tasks, you can add any video to replicate batch0, also videos that are not compatible.
Here lies the problem.

[Findu]

Yes, of course. I mean, only if the option is available and only if it is selected, it will be inserted into the Simple remux command line to batch.

Let's assume you get a video with both options available and create a batch task.
Now, in batch tasks, you can add any video to replicate batch0, also videos that are not compatible.
Here lies the problem.

My mistake.
I didn't realize that Simple remux keeps the original container.
That's why there are incompatibilities.

[NewTwoVideo]

Hello Everyone,

ProWo was very generous to explain to me in Private Messages how to convert many MP4's to M2TS's without having to manually deselect all of the AAC audio components. Here is a generic version of his instructions. Again, a million thanks ProWo.

1) Load the first of your mp4's into clever FFmpeg-GUI.

2) Click Encode Audiostream,
make your settings to convert to AC-3,
click To Batch.

3) Click Batch Tasks,
drag the other mp4's to replicate batch 0,
then click Main Page.

4) Click Extract Streams,
select the videostream only,
click To Batch,
confirm In Container with OK.

5) Click Batch Tasks.
The video extract task should be at index xyz [where xyz is the total number of mp4's].
Change it's idx to 0,
go to the top row and change the top row's idx to xyz.

6) Click Swap Tasks.
The Video extract task should be on top of batch 0. If so, then

7) Drag the other xyz-1 mp4's into the batch to replicate the videostream extraction.

8) Click Execute.

9) If it is done, then you should be in the Multiplex section.
Click None to deselect all streams.

10) Click the blue Source rectangle (on top right) to select the source streams
and then hide them.

11) Check Mux Whole Grid
and confirm with OK.
Note: If you want keep all files, select Clear Selected Rows (on top right over grid).

12) Click Multiplex and wait until it has finished.
You will get another chance to delete some of the files after it finishes.

[NewTwoVideo]

ProWo advised me:

Please note that in Step 11 of the instructions above,
when you check "Mux whole grid," the grid itself is disabled to avoid manipulations,
and you will be unable to scroll to see all of the rows.

[Findu]

@ProWo

If you delete or rename the ffmpeg folder and start the app, this window will appear, but the link to ffmpeg is missing like at first start of the app.


[Attachment 90738 - Click to enlarge]