clever FFmpeg-GUI, small FFmpeg UI, fully portable, no installation.

[audioAI]

You're the best!

[ProWo]

Old MPG recordings cause this error opening Video encoding and Cut.

Could you upload this mpg here to test?

[Findu]

@ ProWo

I'll send you a PM with a link to the old MPG recording.

[ProWo]

I'll send you a PM with a link to the old MPG recording.

Thx, it should be fixed now.
Please update.
Retest your input-mp4 too.

[Findu]

@ ProWo

v3.4.7.08 feedback

As always, thanks again for the latest adjustments!

I can confirm that the problems with some file types have been fixed and everything is working normally again.

Just one more little thing:
DNxHD hide Encode, To batch, Sample and All streams for small resolutions like the old MPG recording. But DNxHR does not.

[ProWo]

Just one more little thing:
DNxHD hide Encode, To batch, Sample and All streams for small resolutions like the old MPG recording. But DNxHR does not.

This is because the DNxHD encoder does not work unless very specific conditions are met.
The DNxHD encoder, on the other hand, is not as sensitive; although it is optimized for high resolutions, bitrates, and pixel rates, it also works without them.
See here:
https://askubuntu.com/questions/907398/how-to-convert-a-video-with-ffmpeg-into-the-dnx...d-dnxhr-format

[Findu]

Interesting! Thanks for sharing!


I think it would make sense to add a preview button to the "Burn-in subtitle" window to test the settings. Currently, all settings are reset when you reopen the window because something wasn't right.

It could look like this:


[Attachment 89693 - Click to enlarge]

[ProWo]

I think it would make sense to add a preview button to the "Burn-in subtitle" window to adjust the settings.

Subtitle mux cannot be previewed with ffmpeg.

[davidt1]

@davidt1

Your Alder Lake does not support AV1 hardware encoding!

Thanks for the info.

[davidt1]

ProWo,

Can you put the focus on the OK buttons in messageboxes again? You did it once, but now they don't have the focus anymore, at least the ones I am using. Thanks.

[videoAI]

@ProWo
v3.4.7.08 feedback

I noticed that, in general, not all implemented code changes stick across releases.

Please pay more attention to version control ..

Thanks

ProWo,
Can you put the focus on the OK buttons in message boxes again?
You did it once, but now they don't have the focus anymore

[videoAI]

@ProWo
v3.4.7.08

Fyi

[Findu]

@ ProWo

> Subtitle mux cannot be previewed with ffmpeg.

Yes, of course!
This is about Video Encoding, Burn-in Subtitle. There you can check and display it.

[videoAI]

@ProWo
v3.4.7.08

Feature Request
-----------------
Is it possible to add support for TMCD streams?
Currently Clever does not display them, on main page, or in Mux.

There is varying support for TMCD in tools & containers.

It is not difficult to remove a TMCD stream, but for many files, I had to modify
the simple Mux batch ffmpeg command to do it, in bulk.
Note: Regular Mux doesn't have a batch function.

Kindly consider it. Thanks

[ProWo]

Feature Request
-----------------
Is it possible to add support for TMCD streams?

What type of support you mean?
Display, extract, write, mux...?

[ProWo]

I noticed that, in general, not all implemented code changes stick across releases.
Please pay more attention to version control ..

You'll have to explain that in more detail...

[ProWo]

Can you put the focus on the OK buttons in messageboxes again? You did it once, but now they don't have the focus anymore, at least the ones I am using. Thanks.

So far, I have only integrated the OK button focus in the general message box, and it works there as before.
I will do the same for all the others.

[videoAI]

It is up to you ..

For me, I only need to see it in Mux/Simple Mux and remove it in batch. [-write_tmcd 0]
So I guess Display, Mux .. will suffice.

Or optionally, a check mark for no tmcd during export/batch/mux (both R/S)

add support for TMCD streams?

What type of support you mean?
Display, extract, write, mux...?

[videoAI]

Sure ..

one of many changes done before but then lost ..

Earlier post - minor formatting change


[Attachment 89696 - Click to enlarge]

Compare with latest clever version [Lapse reverted back to lapse, Subtitle is now subtitle]
formatting changes, default settings, check boxes [checked/unchecked] are not always retained
between versions.

Hope this helps ..

Note: one user a while back complained the every version of Clever fixes an issue but introduces
a second one .. another indication of version control and regression testing issues.

I noticed that, in general, not all implemented code changes stick across releases.
Please pay more attention to version control ..

You'll have to explain that in more detail...

[videoAI]

@ProWo
v3.4.7.08

Is this really the best way to handle mjpeg attachments?


[Attachment 89714 - Click to enlarge]

this is the source file ..


[Attachment 89715 - Click to enlarge]

[videoAI]

@ProWo
v3.4.7.08

Please allow the ability to set defaults for these 3 settings:

1- After Mux Action [Dropdown Selection]
2- Title [Checkmark]
3- Container [Type]

and have them [always] remembered.


[Attachment 89716 - Click to enlarge]

[videoAI]

I think one of them should be 'DNxHR'.

Just one more little thing:
DNxHD hide Encode, To batch, Sample and All streams for small resolutions like the old MPG recording. But DNxHR does not.

This is because the DNxHD encoder does not work unless very specific conditions are met.
The DNxHD encoder, on the other hand, is not as sensitive; although it is optimized for high
resolutions, bitrates, and pixel rates, it also works without them.
See here:
https://askubuntu.com/questions/907398/how-to-convert-a-video-with-ffmpeg-into-the-dnx...d-dnxhr-format

[videoAI]

FYI ..
FFmate-a-simple-way-to-automate-FFmpeg-with-Go