On this particular computer, I am regularly gaining (jumping ahead) about 8 hours, roughly every 24 - 48 hours. Has to be the battery, right ? But I have seen several examples of losing time when a CMOS battery is starting to go, though never of gaining it. Or could it be something else ?
		
			+ Reply to Thread
			
		
		
		
			
	
	
				Results 1 to 8 of 8
			
		- 
	When in Las Vegas, don't miss the Pinball Hall of Fame Museum http://www.pinballmuseum.org/ -- with over 150 tables from 6+ decades of this quintessentially American art form.
- 
	Could be the battery, could be the clock chip going bad, could be a bad time source, could be getting it from a network server. 
 
 Disconnect the network and/or Internet, replace the battery, correct the time, and leave it off for an extended period. If it boots with incorrect time, it's the clock itself. No known fix other than mobo replacement. Fairly common problem.
- 
	Is your time zone set correctly? 
 
 How frequently is the time synchronized and from what server?
- 
	Those are fair questions to ask, but the problem is that people who already know the answers to them know enough to fix time problems themselves. This comment is NOT meant as a knock against the original poster but a simple statement of what I see as a worker in IT.Originally Posted by dLee
- 
	I did not build, install, or set up this particular computer, so I don't know: not quite sure what to check, apart from the hardware troubleshooting already suggested. I've owned or used quite a few computers over the years, and this is the first such instance (regular time gain) that I've run into. I'll check the set TZ and auto-update arrangements, as soon as I find out where to look for them. Must be somewhere in Control Panel, I suppose . . . .Originally Posted by jman98When in Las Vegas, don't miss the Pinball Hall of Fame Museum http://www.pinballmuseum.org/ -- with over 150 tables from 6+ decades of this quintessentially American art form.
- 
	Do you dual boot at all? This creates havoc for me when the clocks go forward/back. 
 
 For checking automatic update stuff, double click on the clock in the taskbar and choose the Internet Time tab.John Miller
- 
	Also double-check the time change. If it is EXACTLY 8 hours, then more likely some sort of update issue. Also check several instances, again if the time change is an EXACT value, then it is getting it from Somewhere. A defective clock or battery is not going to change by precisely 8 hours periodically. 
 
 If the value is much more approximate, and variable, then more likely a defect in the onboard clock.
 
 Don't forget to check the battery contacts for corrosion.
 
 My guess with a value that large would be incorrect time zone setting, with updating causing the issue. Most likely set incorrectly on the original install.
- 
	Thanks, guys -- some good clues. 
 
 Yes, I do, and more than dual, actually. However, this has been a constant for a long time. The difference is that I assembled or was hands-on in the assembly of the previous computers, but not this one. I know exactly where the TZ statement is in my other main OS, but hadn't had to deal with this for Windows before. I use Windows, but am not super well-versed in it in a number of areas.Originally Posted by JohnnyMalaria
 
 O.K., right off the bat I found it set for EST (which makes sense, considering where it was built), whereas I am PST. That has now been reset, and I changed the server from time.windows.com to time.nist.gov. (Looks like XP only gives you those two choices ?) If you'll excuse the pun, time will tell if this is indeed the cure. It says the next auto-sync is set for 8/25. That should be enough to find out. When I said "8 hours jump ahead" within every 36 or so, that was an estimate and an approximation. I kind of doubt that it was exactly 8, on the nose.Originally Posted by JohnnyMalariaWhen in Las Vegas, don't miss the Pinball Hall of Fame Museum http://www.pinballmuseum.org/ -- with over 150 tables from 6+ decades of this quintessentially American art form.
Similar Threads
- 
  Neatvideo strange behaviorBy themaster1 in forum RestorationReplies: 51Last Post: 12th Feb 2012, 09:11
- 
  WMP11 odd behavior.By bizzybody in forum Software PlayingReplies: 2Last Post: 26th Apr 2010, 07:06
- 
  Strange behavior of the 5990By ahhaa in forum DVD & Blu-ray PlayersReplies: 0Last Post: 19th Aug 2009, 12:27
- 
  frustrating behaviorBy digiflux in forum ffmpegX general discussionReplies: 4Last Post: 5th Oct 2008, 11:16
- 
  More wierd Vista behavior...By ahhaa in forum ComputerReplies: 2Last Post: 28th Jun 2008, 21:05


 
		
		 View Profile
				View Profile
			 View Forum Posts
				View Forum Posts
			 Private Message
				Private Message
			 
 
			
			 
			
![Computer details: [This list is SELDOM up-to-date !]
Shuttle SX48P2, Q9550, 4Gb.
ATI Radeon 45__ (?)
Win-7 Ent. x86
WD Black 500Gb. + 1Tb.
Shuttle SP35P2 Pro, 
Intel Xeon 3230, 8Gb.
ATI FireGL V3400
WD Black 500Gb. + 1Tb.
Win-7 Ultimate x64
Shuttle SH67H3 (i5)
 w/ 16 GB. RAM & 
Win-10 Pro 
SSD + HDD 
LG Blu-Ray burner 
[acquired used as an already-HTPC, 
 though not yet assigned to that task]
Shuttle SH67H3 (i7)
 w/ similar config to the one above
and others
[also (reluctantly) perform some "IT-by-default" 
 services for an office, with other computers
 there . . . ]
Various older model Lenovo laptops, like T-40 
  series, T-60
IPAD Pro (Gen. 2)
Video Gear includes:
Oppo 95-BR 
Pioneer 520, 640, 460 
 
Toshiba 32HL67
Panasonic G-25 plasma 
Pan V-series 58 plasma.
TBC-1000 & other assorted gizmos 
Panasonic 4820-SVHS 
 & various other VCRs
Various Betamax gear 
Var. video streaming boxes Comp](/images/buttons/computer.gif)
 Quote
 Quote Visit Homepage
				Visit Homepage
			