When I capture Simpsons episodes(which are broadcast in Dolby Surround) and then convert to CVD and burn 'em with Nero, I get no surround sound when hooked up my surround sound reciever. Does converting the audio to PCM 44.1/16 and then to mp2(192 kb/s, 44.1 khz, 16 bit) destroy the surround effects? I thought the surround sound was matrixed in to the stereo signal. I know my reciever is working fine, because I get DD 5.1 in the Simpsons Season 1 DVD set and Pro-Logic sound on the 2 channel track of the same set. Can anyone offer some insight?
+ Reply to Thread
Results 1 to 9 of 9
-
-
You don't say how you encode but if you use tmpgenc use dual channel mode not stereo if you want to preserve the Dolby.
-
thanks for the advice, i have been encoding in stereo mode. I will try dual channel and see if this helps. Thanks again
-
I am not sure how you are capturing but wouldn't your sound card have to have a "spdif in" in order to maintain the dolby digital surround sound?
-
The only mode which "destroy" the suround info, is the joint stereo mode
I use Stereo and only stereo in my encodings and when the source is suround, it stays that way....
Dual Stereo for some users is better for lower bitrates. For 192kb/s, Stereo is the most common option (most of DVB broadcasts are 192kb/sec Stereo)
Dolby prologic and prologic 2 are for the audio decoding, the encoding is another subject! -
Am I missing something? How can you have a dolby digital file if you have an analog capture card? Unless you are capturing audio through a spdif-in (i.e. digital in) (available on some Soundblaster soundcard) or unless you are capturing through firewire, I can't see how you could maintain a dolby digital signal upon capturing.
-
Dolby digital and dolby surround are not the same animal.
http://home.earthlink.net/~kantack/surround3.htmAs Churchill famously predicted when Chamberlain returned from Munich proclaiming peace in his time: "You were given the choice between war and dishonor. You chose dishonor, and you will have war."
Similar Threads
-
Demux a Dolby Surround 2.0 file into separate streams?
By Xoanon in forum AudioReplies: 27Last Post: 2nd Jul 2021, 08:21 -
Is it possible to convert MKV to DVD and preserve 5.1 Dolby sound?
By bija in forum MacReplies: 4Last Post: 28th Jan 2010, 08:10 -
ac-3 pro plugin and dolby surround
By ecc in forum AudioReplies: 1Last Post: 24th Dec 2009, 11:14 -
Converting WAV file to Dolby Digital® 5.1 Surround
By roma_turok in forum User guidesReplies: 18Last Post: 16th Nov 2008, 22:32 -
Dolby Digital Surround EX encoder
By grasswhopper in forum AudioReplies: 1Last Post: 17th Aug 2007, 23:49