5 coasters to date

[bigbludude]

Hey kids. I'm pulling out my hair trying to figure out why my VCD burns are ending up under my soda instead of in my DVD player. I've captured an mpeg1 using the following specs:

1.150 Mbit/s, 352x240, 29,97 fps, MPEG II audio @224 kbit/s.

Now, when I go to burn with Easy CD Creator, the program begins to finalize my disc right away, and reports a succesful burn 2 minutes later. I'm left with a coaster

Nero seems to do everything right, but as it tries to close the disc it reports an that it could not close disc at once... I'm including the buffer below.

What should I try next.. please shed some light.


---------------------------------->
nero error log
---------------------------------->


Windows 2000 5.0
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.28, size=172099 bytes, created 10/5/2001 1:40:42 PM
Nero Version: 5.5.5.1
Recorder: <MITSUMI CR-4802TE> Version: 1.6D - HA 0 TA 0 - 5.5.5.1
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
CD-ROM: <CREATIVE CD5233E> Version: 1.00 - HA 0 TA 1 - 5.5.5.1
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : MITSUMI CR-4802TE atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : CREATIVE CD5233E atapi Port 0 ID 1 DMA: Off
DiskPeripheral : Maxtor 51024U2 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 54098U8 atapi Port 1 ID 1 DMA: On
=======================

AutoRun : 1
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785908kB)
Free physical memory: 584MB (598756kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: On

Video-CD
5.10.2001

2:43:06 PM #1 Text 0 File Reader.cpp, Line 117
Reader running

2:43:06 PM #2 Text 0 File Writer.cpp, Line 122
Writer CR-4802TE running

2:43:06 PM #3 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)

2:43:06 PM #4 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)

2:43:06 PM #5 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1110 (1110) = #1110/0:14.60
relocatable, CD pos for caching/writing not required/required, no patch infos
1: TRM_DATA_MODE2_2336 (enlarged)
2 indices, index0 (150) not provided
original CD pos #0 + 238742 (238742) = #238742/53:3.17
relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------

2:43:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 1199
Recorder: MITSUMI CR-4802TE;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

2:43:13 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CR-4802TE for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Close Session
Tracks 1 to 2:
TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 0 350400 2943360
TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 2943360 3293760 560995072

2:43:13 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 1110 (1110) = #1110/0:14.60
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 1110 blocks [CR-4802TE ]
1: TRM_DATA_MODE2_2336 (enlarged)
2 indices, index0 (150) not provided
original CD pos #0 + 238742 (238742) = #238742/53:3.17
relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 238742 blocks [CR-4802TE ]
--------------------------------------------------------------

2:43:13 PM #9 Phase 24 File dlgbrnst.cpp, Line 1426
Caching of files started

2:43:13 PM #10 Phase 25 File dlgbrnst.cpp, Line 1426
Caching of files completed

2:43:13 PM #11 Phase 36 File dlgbrnst.cpp, Line 1426
Burn process started at 2x (300 KB/s)

2:43:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

2:43:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 1 (relocatable, no CD pos, no patch infos, orig at #0): write at #1260

3:11:19 PM #14 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

3:11:19 PM #15 SCSI -1023 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02764198
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06
0x00 0x00 0x00 0x00 0x2C 0x00

3:11:19 PM #16 mmc -1023 File ThreadedTransferInterface.cpp, Line 1363
Command sequence error

3:11:19 PM #17 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1363
Could not perform end of Disc At Once

3:11:19 PM #18 SCSI -1023 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02764198
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06
0x00 0x00 0x00 0x00 0x2C 0x00

3:11:19 PM #19 CDR -201 File WriterStatus.cpp, Line 152
Invalid writestate

3:11:19 PM #20 TRANSFER -24 File WriterStatus.cpp, Line 152
Could not perform end of Disc At Once

3:11:19 PM #21 Phase 38 File dlgbrnst.cpp, Line 1426
Burn process failed at 2x (300 KB/s)

3:11:19 PM #22 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

3:11:19 PM #23 SCSI -1023 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06
0x00 0x00 0x00 0x00 0x2C 0x00


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 10/2/2001 9:13:02 PM
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (103, size=22089 bytes, created 10/2/2001 9:13:02 PM

[mike416]

Have you tried playing it in the computer ?
Probably media incompatibility, what's your dvd player ?
Try using another brand of cd-r and try it on cd-rw

[bigbludude]

Hey... yea, on one of the coasters, I can play the .dat fine. Isn't that like a backend way to view the movie, though?

My dvd player is a RCA RC5220P and it can read VCDs, I checked the manual. I could try different media but I just got done backing up mp3s to 30 of these same cds (K Hypermedia 80 min - light green flavor) and I didn't have one bad burn then.

??

[bigbludude]

Here's the important stuff... any idea what it all means:

3:11:19 PM #15 SCSI -1023 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02764198
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06
0x00 0x00 0x00 0x00 0x2C 0x00

3:11:19 PM #16 mmc -1023 File ThreadedTransferInterface.cpp, Line 1363
Command sequence error

3:11:19 PM #17 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1363
Could not perform end of Disc At Once

3:11:19 PM #18 SCSI -1023 File Cdrdrv.cpp, Line 1121
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02764198
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x58 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x06
0x00 0x00 0x00 0x00 0x2C 0x00

3:11:19 PM #19 CDR -201 File WriterStatus.cpp, Line 152
Invalid writestate

[kinneera]

Not likely to cause your problem, but I noticed you don't have DMA enabled for your CD drives. It's highly recommended that you enable it for at least the recorder.

[mike416]

there's a difference between comercially pressed vcd and the one that we burn in a cd-r. I'm sure your dvd manual means that it can played a pressed vcd as for cd-r,just try around with different media. Most likely your dvd player will read cd-rw disc. try it,you can erase it later on anyway