| Author |
Message |
daggi
Member
Joined: 09 Jul 2001
Location: Norway
|
|
I am trying to make SVCD's of my DV-movies(home-made). I am using TMPGEnc 12h to convert. I have tried all possible setting(I think) but nothing will make the blocks go away. Is it any magic code I have missed out or something? My new Pioneer DV-535 is a super DVD-player, and should not be the problem. Does anyone have an idea what might be the problem? Please reply!!! 
|
|
aldus4
Member
Joined: 10 May 2001
Location: London, UK - Bonn, Germany
|
|
Firstly how is the quality of your input source. You cannot make something that is pretty bad quality turn into something sharp crisp and good, just by putting it into TMPGEnc or anything else for that matter.
Secondly are you using the standard SVCD template?
Which other settings have you been experimenting with?
Are the scenes you are encoding into SVCD very fast movement pictures or very dark?
|
|
Grifo
Member
Joined: 10 Jun 2001
Location: Portugal
|
|
I have the same problem, and i use the same programs and the same standalone DVD. I had understand (at my own cost in time and media wasted!)if you have high motion in the video, more blockiness will appear. The only solution wich i have sucess is increasing the bitrate of the mpeg2 file, but it doesnt play in the pionner 535 above 2600 bps, so i search too for a better solution!
A last word: i have try a lot of encoders (cce, lsx, etc), and i come to a conclusion-the best mpeg2 encoder is tsunami, no doubt about that!
|
|
daggi
Member
Joined: 09 Jul 2001
Location: Norway
|
|
First of all(Aldus4), the quality of the movie is great. I have a Sony TRV-900 camera, and it produces high quality.
After capturing with Studio 7, I edit and play it back to my camera. Then I capture it again(with S7) to convert the movie. So far there has not been any compression(only the effects).
And yes, it is a lot of movements and motions in my summer-vacation movies.
I have also tried to capture raw DV-material just to make sure it has nothing to do with the edit process. Same result though.
Then I try to convert the .AVI to MPEG using TMPGEnc.
I have tried most of the templates, and even tested a lot of settings on my own(incresing and decresing bitrate). It seems like VCD with standard settings gives me less blocks, but then the movie is so poor quality that I rather not do it.
Strange thing is that I even tried the 2pass VBR who lasted for several hours, and that was the most horrible result ever.
Maybe I have to wait till I can afford a DVD-burner....?
[ This Message was edited by: daggi on 2001-07-13 03:22:40 ]
|
|
DVman
Member
Joined: 12 May 2001
|
|
I have excellent SVCD from DV (SONY TRV120)
Just use standard SVCD Template
then:
- Motion search to high.
- Interlaced source / Bottom field first
- 4:3 (NTSC)
- Use floating point DCT
It won't get better than that - of course I can't wait for affordable DVD solution.
|
|
ntserver545
Member
Joined: 28 Mar 2001
|
|
I used Sony TRV-530 DV to Videowave III and Convert using TMPEG SVCD template But Using CBR At 5000 k/bs And Played back perfect on Apex 703. There is another software that I will try later is the Campeg Encoder that captures to MPEG-2 in real time from the DV only source with no blockieness. You can set the birate manually up to 5 megabits for encoding from Dv source such as camera.
|
|
jfebus
Can Blower Admin
Joined: 10 Feb 2001
Location: Macondo, Puerto Rico
|
|
Try to play around with the bit rate and the quality setting at tmpgenc. using a bitrate of 2520 on my panasonic 110 is ok.
regards
|
|
Braindrain
Member
Joined: 11 Dec 2000
|
|
Essentially, I agree with most people here. Make sure your software is encoding to the DV codec. Just use TMPG, max bitrate (2500-2600). Also, I really don't know how good 12h is for SVCD encoding. The author claims that it's better but when compared to the last few releases (which were crap).
I use 12a for encoding to SVCD. Beta12 might be good too but I never tried it.
|
|
DVman
Member
Joined: 12 May 2001
|
|
|
|
