| Author |
Message |
dhscsa
Member
Joined: 04 Mar 2009
Location: United States
|
|
| vb6rocod wrote: |
| dhscsa wrote: |
Hello, I've been reading this and I have some questions.
First, I'm thinking of buying this player because I have a few region 2 dvd's from japan that I would like to play and I heard that this player is easy to make region free. I will mainly be using this play to play my non region 1 dvds. However, I read in the dvdhacks section on this player that you're only limited 10 plays of other region discs before it locks into region 1 only and can't be changed again. My question is does a firmware update make it region free permanantly?
Secondly, which firmware update should I do?
Lastly, do I just unrar the files onto the usb drive or do I burn it onto a cd? By the way I'm new to updating firmware. |
Is no need to make any update...
Enter Setup, go to "Preference Page" and enter 138931. On Tv you will see Region Code x. With arrow key change to 0. |
I read on the dvdhacks page for this player that on the newer versions you're only limited 10 plays before the player locks itself into region 1 only. Is this true?
|
|
avkhatri
Member
Joined: 07 Feb 2009
Location: United States
|
|
how can i check to see which dvp5990 i have? (whether it's dvp5990/37 or 37b etc
|
|
Ai Haibara
VH Wanderer
Joined: 22 Jan 2006
Location: Here. Or... there?
|
|
| avkhatri wrote: |
| how can i check to see which dvp5990 i have? (whether it's dvp5990/37 or 37b etc |
My 5990 mentions it on the back of the player. Another thing you might want to do is open the tray and press 5 on the remote twice, to make sure which firmware name/number you'll need.
_________________
If cameras add ten pounds, why would people want to eat them?
|
|
Beave
Member
Joined: 05 Mar 2009
Location: United States
|
|
Is there a firmware update that allows these to play m4v file extensions? I did a search and some sites say you can just rename them mp4's and they'll play, but my 5990/37 just says it doesn't have the right codec. Any advice? We have a lot of m4v's that come when my wife purchases TV shows from Itunes.
|
|
Ai Haibara
VH Wanderer
Joined: 22 Jan 2006
Location: Here. Or... there?
|
|
.m4v files generally are .mp4, yes. The .m4v extension was created by Apple to differentiate between audio-only and video MP4s, I believe.
The 5990 does play .mp4 files, but generally only if they have a DivX/Xvid-encoded video stream and MP3 audio stream in the MP4 container.
Also note that if you buy video from the iTunes Music Store, it's usually DRM-encoded, which the 5990 doesn't support and would certainly make it more difficult to convert those videos to any other format.
_________________
If cameras add ten pounds, why would people want to eat them?
|
|
Chionsas
Member
Joined: 13 Mar 2009
Location: Lithuania
|
|
For those experiencing movie stopping while about 2/3 in (or 1:54, or 1GB, or sth.), try AviFixed - http://www.softpedia.com/get/Multimedia/Video/Encoders-Converter- ... ixed.shtml
It can recreate the avi index and fix the problem. Well, for me at least.
(I had this problem myself with DVIP5996K/51 v31 and AviFixed repaired the broken files that used to hang while playing previously. Now I keep AviFixed.exe the flash drive and run new movies through it just to avoid any surprises. It's, small, extremely fast and does the job well  )
|
|
milz007
Member
Joined: 14 Mar 2009
Location: Canada
|
|
Hi
firstly thanks for the awesome post and all the work put into this
All i want to know is, do i have to install each patch in order or can i just install the latest one and reep the benefits of them all???
another thing is do you thing you will every overcome the 300 file/648 folder B.S when using a usb drive on this player??
Thanks in advance
|
|
vb6rocod
Member
Joined: 24 Aug 2008
Location: Romania
|
|
| milz007 wrote: |
Hi
firstly thanks for the awesome post and all the work put into this
All i want to know is, do i have to install each patch in order or can i just install the latest one and reep the benefits of them all???
another thing is do you thing you will every overcome the 300 file/648 folder B.S when using a usb drive on this player??
Thanks in advance |
Install last, direct 
_________________
Visit my Blog or my site (mirror)
|
|
milz007
Member
Joined: 14 Mar 2009
Location: Canada
|
|
Ok thanks
i thought as much but thought i better check first just incase.
just to verify "DVP5990_37_vb6_v32_All_Logo" is the latest one right?
how about the file and folder limitation?
|
|
philips599037
Member
Joined: 09 Dec 2008
Location: United States
|
|
| milz007 wrote: |
just to verify "DVP5990_37_vb6_v32_All_Logo" is the latest one right?
how about the file and folder limitation? |
V32 is the latest version and apparently vb6rocod doesn't have an external USB drive to test any modification for the File/Folder limitation.
|
|
milz007
Member
Joined: 14 Mar 2009
Location: Canada
|
|
vb6rocod
Member
Joined: 24 Aug 2008
Location: Romania
|
|
| milz007 wrote: |
| ok thanks for your help |
It's a good idea to make more than one partition (I guess max. is 5 , change via "usb" key - USB1, USB 2...).
Navigation in a list with 600 files is also complicated, even with 8 files in file browser (page up or page down - prev and next button = jump 8 files)
_________________
Visit my Blog or my site (mirror)
|
|
mrohau
Member
Joined: 15 Mar 2009
Location: Belarus
|
|
When I turn on my player it's resolution is always 720x576.
I can change the resolution to 1280x720p and watch a movie. But it works until I switch the player off. Next time I start it the resolution will be 720x576 again.
My player was bought in USA and is connected to European Samsung plasma TV over HDMI.
I use this software: DVP5990_37_vb6_v2_3_2_CP1251
Is that something with my player-TV connection or I can tune it in player setup?
thanks!
|
|
Techflaws
Member
Joined: 04 Nov 2008
Location: Germany
|
|
| mrohau wrote: |
When I turn on my player it's resolution is always 720x576.
I can change the resolution to 1280x720p and watch a movie. But it works until I switch the player off. Next time I start it the resolution will be 720x576 again. |
???
The player's chipset max resolution is 720x576.
_________________
Techflaws.org
Things Can Only Get Better
Philips DVP3260/5990 FAQ
|
|
planetisu
Member
Joined: 12 Oct 2008
Location: United States
|
|
I have a couple of files that are .MOV type, but they are not viewable to my player.
Is there some patch to upgrade the codecs?
Regards
Isu
|
|
Ai Haibara
VH Wanderer
Joined: 22 Jan 2006
Location: Here. Or... there?
|
|
No.
Even if you could hack the firmware to get the 5990 to recognize .mov container files in the file lister, you'd still have to have hardware support to play/decode .mov videos and the codecs they may use, more or less. You'll need to re-encode those .mov files into a format the player supports.
(Also, you might want to take a look at the "What media/file types/formats/codecs are supported?" section in the FAQ mentioned in Techflaws' sig.)
_________________
If cameras add ten pounds, why would people want to eat them?
|
|
mrohau
Member
Joined: 15 Mar 2009
Location: Belarus
|
|
| Techflaws wrote: |
| mrohau wrote: |
When I turn on my player it's resolution is always 720x576.
I can change the resolution to 1280x720p and watch a movie. But it works until I switch the player off. Next time I start it the resolution will be 720x576 again. |
???
The player's chipset max resolution is 720x576. |
This is a resolution of "playable" content.
I'm talking about output resolution -- which is up to 1080p. The resolution in which player sends signal to TV.
My TV supports 720p or 1080i. So I set the output signal to 720p. But it works until I restart my player.
In my Samsung TV there is a button on remote control called "Info". It displayes current resoltuion for incoming signal from connected device.
|
|
Techflaws
Member
Joined: 04 Nov 2008
Location: Germany
|
|
| mrohau wrote: |
| This is a resolution of "playable" content. I'm talking about output resolution -- which is up to 1080p. |
Right, there were so many people asking about playing back HD content on a patched 5990, I assumed you were too. Unfortunately there are a few settings the player does not keep when turned off, I guess you'd have to ask Philips support about the point of this, cause I can't think of any. In the meantime you might want to ask vb6rocod on his forum (see links in my FAQ) if he can do something about it with his modded firmware.
_________________
Techflaws.org
Things Can Only Get Better
Philips DVP3260/5990 FAQ
|
|
Oosername
Member
Joined: 04 Jan 2009
Location: New Zealand
|
|
| mrohau wrote: |
| Techflaws wrote: |
| mrohau wrote: |
When I turn on my player it's resolution is always 720x576.
I can change the resolution to 1280x720p and watch a movie. But it works until I switch the player off. Next time I start it the resolution will be 720x576 again. |
???
The player's chipset max resolution is 720x576. |
This is a resolution of "playable" content.
I'm talking about output resolution -- which is up to 1080p. The resolution in which player sends signal to TV.
My TV supports 720p or 1080i. So I set the output signal to 720p. But it works until I restart my player.
In my Samsung TV there is a button on remote control called "Info". It displayes current resoltuion for incoming signal from connected device. |
This may be a function of the Samsung rather than the Philips. My LG TV has the same source display capability and confirms my DVP5990K/75 Philips - set to 1080p in HDMI setup - maintains this setting.
I presume you're using HDMI and not component?
Cheers!
|
|
mrohau
Member
Joined: 15 Mar 2009
Location: Belarus
|
|
| Oosername wrote: |
| mrohau wrote: |
| Techflaws wrote: |
| mrohau wrote: |
When I turn on my player it's resolution is always 720x576.
I can change the resolution to 1280x720p and watch a movie. But it works until I switch the player off. Next time I start it the resolution will be 720x576 again. |
???
The player's chipset max resolution is 720x576. |
This is a resolution of "playable" content.
I'm talking about output resolution -- which is up to 1080p. The resolution in which player sends signal to TV.
My TV supports 720p or 1080i. So I set the output signal to 720p. But it works until I restart my player.
In my Samsung TV there is a button on remote control called "Info". It displayes current resoltuion for incoming signal from connected device. |
This may be a function of the Samsung rather than the Philips. My LG TV has the same source display capability and confirms my DVP5990K/75 Philips - set to 1080p in HDMI setup - maintains this setting.
I presume you're using HDMI and not component?
Cheers! |
yes, I use HDMI
|
|
dude112
Member
Joined: 01 Dec 2004
|
|
I just bought this dvd player and it's a 5990/12 (Netherlands).
Can I use this firmware which is for /37?
Kinda off topic. I've got it connected through hdmi. Is it best to always set the resolution to 1080p? Got a Sony Bravia full HD
EDIT: Found the link for European version http://forum.videohelp.com/topic355440-30.html
|
|
chuckguy17
Member
Joined: 19 Mar 2009
Location: United States
|
|
Hi I have a DVP 5990 and am currently using the DVP5990_37_vb6_v32 firmware. I've been using other versions of his firmware since September and it has been excellent with no problems until recently.
I have a 1TB external hard drive formatted to FAT32 with many video files oganized into folders such for example TV Shows, Family Guy. Season 7, etc. Everything has worked perfectly since September.
Recently I added more video files and folders to the hard drive (now at maybe 40% hard drive capacity). When I connected the hard drive to the DVD player and tried to use it as before, some folders when I go into them show that there are no files in that folder. The files are in fact there and were properly shown on the DVD player before I added more video files elsewhere on the hard drive.
I was wondering if anyone had the same problem and could offer a solution. I heard there might be some limitations of the number of files and folders you can use with the USB function on the DVD player. I was wondering if anyone could give me the specifics on that. Thanks in advance.
|
|
Techflaws
Member
Joined: 04 Nov 2008
Location: Germany
|
|
jhebi
Member
Joined: 31 Jul 2007
Location: United States
|
|
Does anyone have problems with the screen turning orange? I have a DVP5992 and connect throug HDMI and suddenly the picture is orange, not blue. Could it be a fault player?
|
|
badbob001
Member
Joined: 14 Mar 2009
Location: United States
|
|
Can this firmware support showing thumbnails for video files?
For example, if I have this file: movie01.avi, can I put a file called movie01.jpg and have it show in the jpeg preview box when movie01.avi is selected? Ideally, thumbnails would be in a \.thumbnails\ subfolder so not to clutter up the folder.
I guess at worse I can still put a movie01.jpg and teach my 2 year old that it's the NEXT file that is the movie. Or not.
|
|
captsam
Member
Joined: 05 Apr 2009
Location: United States
|
|
| chuckguy17 wrote: |
Hi I have a DVP 5990 and am currently using the DVP5990_37_vb6_v32 firmware. I've been using other versions of his firmware since September and it has been excellent with no problems until recently.
Recently I added more video files and folders to the hard drive (now at maybe 40% hard drive capacity). When I connected the hard drive to the DVD player and tried to use it as before, some folders when I go into them show that there are no files in that folder. The files are in fact there and were properly shown on the DVD player before I added more video files elsewhere on the hard drive.
I was wondering if anyone had the same problem and could offer a solution. |
What Brand of Hard drive do you have? I had a similar problem. Turns out the AC/DC Adapter to my "SimpleTech" Drive was going bad and didn't provide enough power to the hard drive. The fix was to get a new AC/DC Adapter. I just bought another drive with the same adapter (and returned [the broken one] as defective).
|
|
caca123
Member
Joined: 30 Oct 2008
Location: Canada
|
|
| captsam wrote: |
| chuckguy17 wrote: |
Hi I have a DVP 5990 and am currently using the DVP5990_37_vb6_v32 firmware. I've been using other versions of his firmware since September and it has been excellent with no problems until recently.
Recently I added more video files and folders to the hard drive (now at maybe 40% hard drive capacity). When I connected the hard drive to the DVD player and tried to use it as before, some folders when I go into them show that there are no files in that folder. The files are in fact there and were properly shown on the DVD player before I added more video files elsewhere on the hard drive.
I was wondering if anyone had the same problem and could offer a solution. |
What Brand of Hard drive do you have? I had a similar problem. Turns out the AC/DC Adapter to my "SimpleTech" Drive was going bad and didn't provide enough power to the hard drive. The fix was to get a new AC/DC Adapter. I just bought another drive with the same adapter (and returned [the broken one] as defective). |
I have Ext HDD 1TB of SimpleTech , My ExtHDD when it warm up it play ok but when turn it off to cool down and turn on it play few minute and my DVD Philip stop playing and show not file in there, and My PC show error something like this " the sector not found required" ... Is there my HDD SimpleTech same problem yours, captsam ?
|
|
slowride45
Member
Joined: 15 Apr 2009
Location: United States
|
|
A while back I bought two dvp 5990, loaded firmware from this site, and the systems couldn't be better. However, I just bought another dvp5990/37 for a friend and I cant find the firmware that i used on mine. I am mainly looking for the black background with the vibrant Philips logo. I tried this firmware version http://rapidshare.de/files/45238647/DVP5990_37_vb6_v32_All_Logo.rar.html and updated the system with the Philips file, but the splash screen is still the stock blue. Can someone please tell me what version to use that contains the vibrant blue/white philips logo on black? Thanks.
Thank you vb6rocod for all your efforts with this amazing firmware.
|
|
philips599037
Member
Joined: 09 Dec 2008
Location: United States
|
|
| slowride45 wrote: |
Can someone please tell me what version to use that contains the vibrant blue/white philips logo on black? Thanks.
|
I guess vb6rocod didn't make a V32 with the "Star Logo" you speak of. I made one for you using the Logo you want.
http://rapidshare.de/files/46767052/DVP5990_37_vb6_v32_Star_Logo.rar.html
And don't worry, I've changed the Logos and File Browser skins for myself as well as members here and the firmware works perfectly. Also, you should upgrade your players with this latest V32 firmware. It allows for 48 characters via USB in the File Browser.
|
|
slowride45
Member
Joined: 15 Apr 2009
Location: United States
|
|
Thank you so much [philips599037]...You are awesome!!! Yes, I do agree, I should be using the latest firmware. I was just hesitant because I'm not too familiar with changing the subtitle font/placement/color, and I really got used to the white small subtitle font on the bottom.
Thanks again...super logo!
|
|
|
|
