MiniDV video capture - on screen time/date stamp transfer

Logan69 · Member Joined: 05 Apr 2007 Location: United States

I have a JVC GR-D370 minidv camcorder. It is about 5 yrs old. I have just gotten around to trying to transfer the video from minidv into my computer. However, I found out that when I connect the firewire to the computer, I am able to transfer the video however the time/date stamp does not transfer. I looked in the manual and it does state outright that when transfering the video the time/date stamp will not transfer. I have begun to go down the road of trying to use a component output (ADS video xpress) to capture the video and that does work, however the picture is too grainy. My question is: with the newer MiniDV camcorders, when you transfer video via the firewire will they transfer the time/date stamp along with the video? And, secondly, if I put my old minidv tapes into a new camcorder will I also be able to transfer the video with the time/date stamp, considering the fact that the initial video was captured with an older minidv camcorder? Thanks for any insight towards this effort!

JohnnyMalaria · Member Joined: 29 May 2006 Location: United States

Try our Enosoft DV Processor (it can burn the time/date etc onto the video during capture - if you want it to - or view it later). (You need Win XP or later + a CPU with SSE2). This software is free for personal use. There are other tools available, but our one is by far the fastest and simplest (just a single mouse click to add the time/date etc).

Our Enhanced DV Decoder can also display the time/date etc. Again, SSE2 required - but works with Windows 2000/XP/Vista.

RE old tapes: as long as the original camcorder had the time/date set, this information should be on the tape and will be transferred to the computer along with the video....
_________________
John Miller
enosoft - high performance tools for music and video

Home of the Enosoft DV Processor - Free for personal use!

Logan69 · Member Joined: 05 Apr 2007 Location: United States

I appreciate the offer, but I'm looking to capture the time/date stamp that is currently on the video.

JohnnyMalaria · Member Joined: 29 May 2006 Location: United States

When you play the tape in the camcorder and see the time/date, it is reading the time/date from the additional data recorded with the video. This information is also sent via FireWire when you transfer the video to the computer. Our software reads that same information and puts it on the video. It's exactly the same process that the camcorder is doing - the only difference is that the position/letter size will be different.

Here's an example:

ron spencer · Dear Leader Joined: 23 May 2005 Location: Ish-ka-bibble

http://dts8888.com/vDTS/vdts.htm

nothin better...you can choose font, etc.
_________________
'Do I look absolutely divine and regal, and yet at the same time very pretty and rather accessible?' - Queenie

Logan69 · Member Joined: 05 Apr 2007 Location: United States

Thanks.....however, still looking to find out if I purchase (or borrow) a newer miniDV camcorder, will the firewire transfer of previously taken video include the time/date stamp.....

dun4cheap · Member Joined: 08 Oct 2002

The timecode is transferred via firewire, it does not matter what dv device is used to transfer it.

Logan69 · Member Joined: 05 Apr 2007 Location: United States

I thought so too....however, that is not true with my camcorder....it even states it outright in the manual. And I did try it and, indeed, it did not transfer the time/date stamp.

dun4cheap · Member Joined: 08 Oct 2002

Take it back

...

JohnnyMalaria · Member Joined: 29 May 2006 Location: United States

Logan69 · Member Joined: 05 Apr 2007 Location: United States

I'll give it a shot this evening and let you know how it works....thanks.

ron spencer · Dear Leader Joined: 23 May 2005 Location: Ish-ka-bibble

JohnnyMalaria · Member Joined: 29 May 2006 Location: United States

It depends whether you are wanting to add a time/date that will be a creative part of the video or if you just need to see the information - e.g., for dailies, security etc.

The OP has options....

ron spencer · Dear Leader Joined: 23 May 2005 Location: Ish-ka-bibble

I use it for home movies....so I like the creative aspect. I think you could get your program to do it...could you? If so I would buy it....but as I said just stamping it anywhere, IMHO, just does not look good.
_________________
'Do I look absolutely divine and regal, and yet at the same time very pretty and rather accessible?' - Queenie

JohnnyMalaria · Member Joined: 29 May 2006 Location: United States

The original intent behind our software was to enable real-time performance on modest systems. For timecode support - which changes every frame - using traditional Windows font techniques is too costly in terms of CPU time etc.

However, we intend to add a custom text field to the overlay features - this would include support for different fonts etc as well as. For current generation desktops, I expect real-time performance will still be achievable.

ron spencer · Dear Leader Joined: 23 May 2005 Location: Ish-ka-bibble

that is good news....but you are not changing every frame....you put it on for a bit, then off; so windows fonts are fine. for this you get faster than real-time anyway
_________________
'Do I look absolutely divine and regal, and yet at the same time very pretty and rather accessible?' - Queenie

Logan69 · Member Joined: 05 Apr 2007 Location: United States

O.K....so, I downloaded the Enosoft DV Processor and I captured the video (I think)....when I am capturing the video I do see the time/date stamp in the "output" preview screen, however, when I go to play the video, irrespective of what player/application I use, it states that my system is out of memory and cannot play the video. I tried both the Type 1 and 2 DV AVI file format. I can see the video file in exlporer listed as an AVI, however, I cannot get anything to open it. It is a completely proprietary format or am I doing something wrong? I feel as though I'm so close to getting the vid the way I want it, based off of the output preview screen, and yet I can't view/use it......help!!!

Thanks!

YoCuz · Member Joined: 05 May 2007 Location: United States

Can anyone help me out.

Current setup is Sony DSR1500a with SDTI cards, no composite output except for the Super Output. I need to make a window dub with visible timecode. I currently am achieving this by patching the output of the of the Super into the dvd recorder that I am using. I want to accomplish this using the firewire output of the Sony DSR-1500a and the Firewire input of the Sony RDR-HX900.

Anyone have any experience with this.

Logan69 · Member Joined: 05 Apr 2007 Location: United States

Anyone?.....

minko · Member Joined: 29 Dec 2005 Location: United States

Logan69,

I've recently downloaded and used Enosoft on several captures. The resultant files play fine on my PC using Windows Media Player 10 and I can import them into Pinnacle Studio 10.7 with no problems - So, I don't believe that they are "completely proprietary".

I've also tried Type 1 and Type 2 - I did have some minor issues with one type (can't remember now) of AVI, but playability was not one of them.

If you have WMP 11, then maybe that's the problem? Have you tried VLC Player?

Logan69 · Member Joined: 05 Apr 2007 Location: United States

Well.......I worked it out and the Enosoft application is actually working quite well. It's capturing well and incorporating the date and time stamp (don't know why none of my applications would play the AVIs initially - could have been a memory issue with my system). However, it only seems to be able to capture 5 mins of video at a time. Is this a feature restriction of the shareware version or is there a configuration setting that I can manipulate to all me to capture a complete MiniDV cassette?

Thanks!