| Author |
Message |
mrhua
Member
Joined: 18 Nov 2002
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
I am currently playing with this tool. I have one problem however...it will not install and the error message is in German. But it during the VB wraper install and gives me a familiar message about it needs to update components on my machine. I tell it OK and it wants to reboot. Next time I log into my machine a start the installer again, it gives me the same message.
I finally resorted to extracting the CAB file and putting the contents into a "DVD2DVDR" folder under "C:\Program Files". I am able to launch the program and I am ripping now. However I do not know if all necessary components have registered correctly since I did not use the installer. I will let you know in about an hour. I am trying "8 Legged Freaks" right now...which once you strip out extra audio and subs, it will fit on 1 DVDR without re-encoding.
Stay tuned...
John
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
Just figured out the problem with the installer. it requires SP3 for Win2K. I'm dl'ing it now...will update everyone later.
|
|
Luis Neves
Member
Joined: 18 Nov 2002
|
|
Uau! It rocks!
Instalation is a little confusing. After that even a newbie like me could made a backup in 3 steps without never tried before Ifoedit.
Basically DVD2DVD-R allows to select what we want to rip, if after that the size is still above 4.7 Gb it determines automatically the bitrate for reeenconding, reencodes and produces an Ifoedit output. With Ifoedit we have just to start a new project, load files already on disk one by one, and produce the DVD image. Then burn and its done.
I have tryed Blade Runner, didīt need reencoding, worked nicely. I am now trying Coyote Bar, which will need reencoding. Hope works well.
Easier than this is difficult, it replaces lots of intermediate steps and different software. Hope that encoding algorithm is so good as CCE.
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
Luis,
When you created the new project in InfoEdit, did you need to reload the IFO and "Get VTS Sectors". I was unable to create a new project in Gear until I did this.
|
|
Luis Neves
Member
Joined: 18 Nov 2002
|
|
No, it worked directly, just loaded the video, sound and subtitles files.
Had a problem now: after ripping Coyote when was starting to reencode it looked for CCE 2.5 on my computer, but I have 2.66 and didīnt find it, aborted at this stage.
It seems I have to look for CCE 2.5...
|
|
NYPlayer
Member
Joined: 02 Apr 2002
|
|
Great package I just did episode 2. It re-enocded the movie and everything. All that was left to be done was autor in ifoedit and burn.
It does require cce 2.50.
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
just got this info from the forum: http://www.dvd2dvd-r.de/modules.php?op=modload&name=eBoard&am ... amp;tid=74
This explains the steps needed for IfoEdit authoring.
Here is a rough translation:
---------------------------
1. start - IfoEdit 0.95
2. Select - menu 'DVD Author' -> 'Author new DVD'
3. in the field 'video' enter the path to the file 'Video_0xE0_NEW.M2V'
4. in the field 'Audio' the paths to the files 'Checked_Audio_0x??_????????.???'
5. Adjust - each Audio delay once dialings and in the Dropdownliste the language
6. leave Audio delay always on 0
7. in the field 'Subpicture' the paths to the files 'Subtitle_0x2?_????????.SUP'
8. Adjust - each Subpicture delay once dialings and in the Dropdownliste the language
9. in the field 'Scene Changes/Chapters' the path to the file 'CellTimes. txt'
10. in the field 'Destination' a path to a file 'VIDEO_TS', generated will should in that the DVD
11. Click 'OK'
12. Now the DVD is designed. Subtitles were inserted, the colors must be copied out of that 'ORIGINAL. IFO' into the newly generated Ifo.
13. click 'Open' and select the file 'ORIGINAL. IFO'
14. Mark - in the upper window of IfoEdit that 'ORIGINAL. IFO' and select the PGC under VTS_PGCITI, which was copied with DVD2DVD-R
15. Select - menu 'Subtitle Color' -> 'Copy Colors from this PGC'
16. Mark - in the upper window of IfoEdit the new place 'VTS_01_0.IFO' and select the PGC 1 under VTS_PGCITI
17. Select - menu 'Subtitle Color' -> 'paste Colors to this PGC'
18. click 'Save'
19. Close - IfoEdit
20. Start - IfoEdit
21. click 'Open' and select the new place file 'VTS_01_0.IFO'
22. click 'Get VTS Sectors'
23. Generate or burn now image.
-----------------------------------------------
Hope this helps!
BTW...what are you guys using to burn?
John
Last edited by KradLrobR on Nov 18, 2002 21:15, edited 1 time in total
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
BTW...my first attempt seemed to work OK. Plays in DVD-ROm fine. However, when I tried in a settop player, it was very eratic...blocky, pixelated, freezes.
I am starting over and making sure I follow the steps outlined above. I am hoping that it was messed up only becasue I used an +RW and the older player didn't like it much.
John
|
|
NYPlayer
Member
Joined: 02 Apr 2002
|
|
I am using the new IMGTOOLS that can be gotten at www.doom9.org.
They have an easy burn procedure now.
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
Oh well....just tried my first disc in my Pioneer DV434 and it wigged out just the same. It will play about 7 or 8 seconds of each chapter, then it freezes.
I am using Gear Pro to burn the disc...that *shouldn't* be an issue. Also, I am doing 8 Legged Freaks (hideous movie), but it does not require any re-encoding. This kinda limits the number of things that could be wrong.
Like I said, I am starting over now that I have good IfoEdit instructions right from the author of DVD2DVD-R.
I'll post my results.
John
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
NYPlayer,
How was the quality of SWE2 after the re-encode? Can you share your settings at the bottom (in teh encode section)?
Thanks,
John
|
|
NYPlayer
Member
Joined: 02 Apr 2002
|
|
I used the default settings the only thing I changed was Instead of vbr I changed to CBR. Quality was great. I chose CBR for faster encode time to make sure it worked.
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
does 2 pass VBR produce better quality?
|
|
bugande
Member
Joined: 14 May 2001
|
|
| NYPlayer wrote: |
I am using the new IMGTOOLS that can be gotten at www.doom9.org.
They have an easy burn procedure now. |
I tried it on my Win XP Pro but the program never starts. What are you using?
|
|
NYPlayer
Member
Joined: 02 Apr 2002
|
|
It uses Nero's ASPI so u must have nero installed.
|
|
bugande
Member
Joined: 14 May 2001
|
|
I do have Nero installed, latest version. When I double click it just does nothing.
|
|
bugande
Member
Joined: 14 May 2001
|
|
I am trying to use the latest ImgTool 0.99.1
|
|
NYPlayer
Member
Joined: 02 Apr 2002
|
|
I am using VER 0.99 and have no problem. I am on XP pro. Its working I have no problem.
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
Works NP for me...but I am using Win2K.
|
|
NYPlayer
Member
Joined: 02 Apr 2002
|
|
KradLrobR
That quick translation u posted worked like a charm the subtitles are selectable  
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
heh...and I'm not even German (well a little bit)!
Sometimes Bablefish *can* do an OK job.
BTW...I am still having some issues with playing the finished product on a settop player. I am going to give Imgtool a try. Maybe Gear is screwing me up!
NYPlayer...how long did it take you to rip SWE2 (from start to finish - rip and CBR encode)?
|
|
NYPlayer
Member
Joined: 02 Apr 2002
|
|
bugande
Member
Joined: 14 May 2001
|
|
Is there any special way to install ImgTool 0.99.1 ?
I just extracted and tried to execute. Really bugging me since I can use an older version.
|
|
apeman
Member
Joined: 18 Oct 2002
Location: Northern Va
|
|
I've had problems using this with Maestro and Scenarist to keep menus and other procedured because the software is designed for PAL disks not NTSC. It reports (using BLADE II as an exapmle) the worng play length because of the PAL coding. So when you go to import chapters and things in maestro it comes out all goofed up. I gave up and am just using Ifoedit, VOBedit and Rempeg2. It would be a great program if it was NTSC compatible though. I would love it if Derrow or some other DVD guru wold slap DVDXCOPY, DVD2DVDR and Nero all tgether in one great software program. From what I hear that is the next step if the Feds do't stop them.
|
|
mrhua
Member
Joined: 18 Nov 2002
|
|
| KradLrobR wrote: |
BTW...my first attempt seemed to work OK. Plays in DVD-ROm fine. However, when I tried in a settop player, it was very eratic...blocky, pixelated, freezes.
I am starting over and making sure I follow the steps outlined above. I am hoping that it was messed up only becasue I used an +RW and the older player didn't like it much.
John |
I saw a post in a different forum earlier from someone who had the exact same problem ... he said that it went away when he unchecked the "upper field first" checkbox from the encode options ... perhaps you need to reverse whatever option you tried?
Good luck; let us know your success. I'm happy backing-up single layer dvds with DVD Decryptor's ISO read and ISO write; I'm interested in an easy way (meaning less user interaction) way to backup dual layer (> 4.5gb) dvds to one dvdr. This app seems oh-so-promising .. 
|
|
Luis Neves
Member
Joined: 18 Nov 2002
|
|
Tryed again, it does not work with CCE 2.66. Damn!
Anyone knows how to find the older 2.5 version?
Tx.
|
|
Faustus
insane.
Joined: 11 Apr 2002
Location: Dallas, TX
|
|
Apeman:
Your problem sounds like the issues the old one was having before he updated it... what version of DVD2DVDR are you using? What version of CCE with it?
|
|
KradLrobR
Member
Joined: 15 Sep 2001
|
|
| mrhua wrote: |
| KradLrobR wrote: |
BTW...my first attempt seemed to work OK. Plays in DVD-ROm fine. However, when I tried in a settop player, it was very eratic...blocky, pixelated, freezes.
I am starting over and making sure I follow the steps outlined above. I am hoping that it was messed up only becasue I used an +RW and the older player didn't like it much.
John |
I saw a post in a different forum earlier from someone who had the exact same problem ... he said that it went away when he unchecked the "upper field first" checkbox from the encode options ... perhaps you need to reverse whatever option you tried?
Good luck; let us know your success. I'm happy backing-up single layer dvds with DVD Decryptor's ISO read and ISO write; I'm interested in an easy way (meaning less user interaction) way to backup dual layer (> 4.5gb) dvds to one dvdr. This app seems oh-so-promising .. |
Thanks mrhua.
The problem is that this was happening on a DVD that did not require encoding...so that rules the options at the bottom out. I am wondering if it has something to due with the fact that it is a +RW media. Is it possible that it is finding old data on the disc? Isn't doing a "Quick Erase" enough to burn a new disk?
Luis, you can get CCE 2.50 from doom9.org in teh downloads (make sure you click "show more titles" and the end of one of the sections to expand then search teh page.
John
|
|
rnoski
Member
Joined: 19 Nov 2002
Location: United States
|
|
does anyone know hot to get this program to load on windows xp ? i keep gettting some kind of error when i try to install but of course i do not speak german! that might help a little. can anyone please give me some assistance with this problem??? please! i am anxious to try out this program thanks, rnoski
|
|
|
|
