Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 31 to 39 of 39
Thread
-
mdalacu
dmMediaEncoder Tested and approved.
Coded hevc (libx265), yuv422p to test.
Some more filtering options for video would be cool.
Thank you.
ffmpeg version N-66232-g5e3da25 Copyright (c) 2000-2014 the FFmpeg developers
built on Sep 10 2014 22:01:59 with gcc 4.8.3 (GCC)
configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-decklink --enable-zlib
libavutil 54. 7.100 / 54. 7.100
libavcodec 56. 1.100 / 56. 1.100
libavformat 56. 4.101 / 56. 4.101
libavdevice 56. 0.100 / 56. 0.100
libavfilter 5. 1.100 / 5. 1.100
libswscale 3. 0.100 / 3. 0.100
libswresample 1. 1.100 / 1. 1.100
libpostproc 53. 0.100 / 53. 0.100
Input #0, mpegts, from 'C:\Users\Marchand\Videos\Videos\00200.m2ts':
Duration: 00:00:07.47, start: 11.650667, bitrate: 41358 kb/s
Program 1
Stream #0:0[0x1011]: Video: h264 (High) (HDMV / 0x564D4448), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 90k tbn, 47.95 tbc
Stream #0:1[0x1100]: Audio: dts (DTS-HD MA) ([134][0][0][0] / 0x0086), 48000 Hz, 5.1(side), fltp, 1536 kb/s
Codec AVOption crf (Select the quality for constant quality mode) specified for output file #0 (C:\Users\Marchand\Videos\Videos\00200.mkv) has not been used for any stream. The most likely reason is either wrong type (e.g. a video option with no video streams) or that it is a private option of some encoder which was not actually used for any stream.
x265 [info]: HEVC encoder version 1.3+55-c21ddfe6a6d9e234
x265 [info]: build info [Windows][GCC 4.8.3][32 bit] 8bpp
x265 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.1 Cache64
x265 [info]: WPP streams / pool / frames : 17 / 4 / 2
x265 [warning]: !! HEVC Range Extension specifications are not finalized !!
x265 [warning]: !! This output bitstream may not be compliant with the final spec !!
x265 [info]: None profile, Level-4 (Main tier)
x265 [info]: CU size : 64
x265 [info]: Max RQT depth inter / intra : 1 / 1
x265 [info]: ME / range / subpel / merge : star / 57 / 3 / 3
x265 [info]: Keyframe min / max / scenecut : 23 / 250 / 40
x265 [info]: Lookahead / bframes / badapt : 25 / 4 / 2
x265 [info]: b-pyramid / weightp / weightb / refs: 1 / 1 / 0 / 3
x265 [info]: Rate Control / AQ-Strength / CUTree : CRF-28.0 / 1.0 / 1
x265 [info]: tools: rect rd=4 lft sao-lcu signhide
Output #0, matroska, to 'C:\Users\Marchand\Videos\Videos\00200.mkv':
Metadata:
encoder : Lavf56.4.101
Stream #0:0: Video: hevc (libx265), yuv422p, 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, 23.98 fps, 1k tbn, 23.98 tbc
Metadata:
encoder : Lavc56.1.100 libx265
Stream #0:1: Audio: aac ([255][0][0][0] / 0x00FF), 44100 Hz, stereo, fltp, 128 kb/s
Metadata:
encoder : Lavc56.1.100 aac
Stream mapping:
Stream #0:0 -> #0:0 (h264 (native) -> hevc (libx265))
Stream #0:1 -> #0:1 (dts (dca) -> aac (native))
Press [q] to stop, [?] for help
video:848kB audio:365kB subtitle:0kB other streams:0kB global headers:1kB muxing overhead: 0.424289%
x265 [info]: frame I: 2, Avg QP:27.35 kb/s: 63.78
x265 [info]: frame P: 59, Avg QP:28.20 kb/s: 2278.33
x265 [info]: frame B: 118, Avg QP:32.21 kb/s: 269.72
x265 [info]: global : 179, Avg QP:30.83 kb/s: 929.47
x265 [info]: Weighted P-Frames: Y:13.6% UV:8.5%
x265 [info]: consecutive B-frames: 8.2% 6.6% 72.1% 9.8% 3.3% -
Well, I think everything that's needed for the target (x264, x265) now is there. Only the layout is still a bit untidy.
What I like the most are the "Source files/streams" sections. These are very logical layed out and allow easily to set up simple or complex convert/remux operations with multiple input clips. The second plus is that these setups can be moved to job queue for batch processing.
Oh yeah, also not unimportant to mention! In my test setup (XP), your app is very stable and did what I asked from it.
What I still don't like is that nothing is saved when you exit dmMediaConverter. It would be nice if at least the file add and output dialogs would open at the last opened path. Even better if the last job and job queue were saved too.
You could pay some more attention to the aesthetics where it concerns the layout. Also make the params: field a bit longer. You have plenty of room out there. See the example attachment below.
You could add a extra tab for the output options that are now on the "more" button (the options are ok). Just four tabs "Input Settings/Output Settings/Job Queue/Output Log".
But all in all enough progress to make this new version worthwhile again.
ChrisLast edited by Chris K; 15th Sep 2014 at 12:46. Reason: typo + correction
-
-
New, big release: v1.5.0!
Changelog:
- Parallel jobs - you can run multiple jobs in the same time
- Initial job progress implementation
- Split UI improvements
- Running under WINE is more robust now (Mac Os)
- Internal code rework
- Some bugs fixed
- Updated FFMpeg binary with latest version
I hope you like it and please provide feedback! -
Version 1.6.0 is up!
Minor release:
- Added checkup for not overwriting the source file.
- You can assign dmMediaConverter to open media files. (ex. Right clik on file and "Open with..." dmMediaConverter's executable). You can use it like media info.
- Now bitrate will be shown in kbit/s for better readability.
- Small UI fixes
- Updated FFMpeg binary with latest version
http://dmsimpleapps.blogspot.ro/2014/04/dmmediaconverter.html -
http://dmsimpleapps.blogspot.ro/2014/04/dmmediaconverter.html
Version 1.7.0 is up
- Burn text based subtitles (not yet picture based).
- Now you can manually specify additional FFMpeg filters (More) for audio and video streams.
- On linux it removes automatically "'" from metadata. Workaround for MKVToolNix generated files.
- Added option for auto add subtitle file (only *.srt for now).
- Small UI fixes and bugfixing
- Updated FFMpeg binary with latest version -
http://dmsimpleapps.blogspot.ro/2014/04/dmmediaconverter.html
Version 1.8.0 is up
- Watermark. Double click on image to quickly position the logo.
- First Mac OSX native build. Available on Amazon for 5$.
- Estimate encoded stream size if the encoding type is CBR.
- Small UI fixes and refinements.
- Small bugs fixes.
- Updated FFMpeg binary with latest version.