Hi!
I found on this forum new program - DScaler which works perfectly... but
I own 3 USB grabbers and 2 of them have 2 inputs - Composite and S-Video, one of them has 4 Composite inputs.
I tried to select manually Composite or S-Video but DScaler changes no source, and always displays the same...
How to do it?
Thank you for everything!
Miro
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 14 of 14
Thread
-
-
I do not quite understand what you are saying.
To get a picture from the s-video connection on the usb device you must have a s-video cable plugged in and the output device MUST output s-video. Many VHS machines will not.
But a usb device with 4 composite inputs ??????? -
They exist. Their intended use is monitoring closed-circuit cameras. http://www.amazon.com/HDE-EasyCap-Model-002-Channel/dp/B001M547EM
-
It looks like if is one signal detected then is impossible to select other from one device...
First time I had for testing DScaler connected only S-Video to one device and it was correctly displayed, after this test I connected also composite video to the same device and it looks first was found composite and it's now impossible to select S-Video - but S-Video is connected too...
How to select between composite and S-Video ?
Yes, it's EasyCAP002 - but works not with my Win8
Miro -
I've never used descaler or that particular capture device, but generally you go to the properties sheet for the capture filter or crossbar filter and select which input you want.
-
I have not used DScaler for a long time, but it is probably designed to be used with one video connection at a time and one device at a time, not several connections at once or several devices at once. If you need to switch between multiple devices and multiple video connections use something other than DScaler. You can try AmarecTV as suggested.
-
-
Thank you veeeeeery much!
The experience with AmaRecTV is better than DScaler... all works correctly and interlaced options are perfect!
I have few Qs as last:
My TV cart MSI @nywhere A/D has also composite and S-Video inputs and both reports error: return:HRESULT=80004005 (FAILED) Unknown Error
... where is any problem?
And: AmaRecTV allows to use 12 sources - is possible to display at least 2 together at once?
My general problem:
SMI EasyCAP002 USB 2.0 DVR 4CH Dongle:
- at connection to PC appears "USB device was not recognized. Please unplug and plug-in again"
- in Device Manager it shows only "Unknown Device" with error message "Windows stopped device 'cause device reported problem (Code 43)"
- if I install driver by wizard, no changes, if I try it manually reports "Digitally not signed" and breaks installation or I tried to install driver in Vista SP2 compatibility mode, installation reports succesfull but device is not known...
Can you help me to these last Qs? -
Try this driver : http://www.sabrent.com/drivers/USB-AVCPTSetup_For_Win7.zip
Its a old thread in Videohelp: https://forum.videohelp.com/threads/329555-EasyCap-Video-Adapter-Driver-for-Windows-7-64-bit
Similar Threads
-
AVT-8710 - Composite In = Composite Out or S-Video Out?
By Hessian in forum Newbie / General discussionsReplies: 3Last Post: 31st May 2013, 15:52 -
Vegas Pro 10.0 - Manually switching multicam video sources?
By Cygnus111 in forum EditingReplies: 4Last Post: 28th Jan 2013, 11:31 -
manually copied of .MTS video files back to Panasonic HDC-90 memory card
By Rovi in forum Camcorders (DV/HDV/AVCHD/HD)Replies: 3Last Post: 12th Jan 2012, 13:17 -
Manually sync text file with video
By druucifer in forum SubtitleReplies: 1Last Post: 16th Aug 2011, 13:57 -
What video cards support S-Video & Composite output over VGA via adapters?
By Bix in forum ComputerReplies: 5Last Post: 22nd May 2010, 22:57