I want best settings for MeGUI
I want a high quality and sharping Like this
Maybe another software do this?
+ Reply to Thread
Results 1 to 20 of 20
The "best" settings vary depending on the individual video.
I want best script for Colors and sharpen
Sharper isn't always better. If the video is too sharp you will get buzzing edges, increased noise, and more bitrate will be required to keep image quality.
If there is something wrong with the colors you need to tailor the adjustments to the the particular video.
If you want a slightly sharper video and you're resizing, use a sharper resizer. Bilinear (soft) is err...... not so sharp. I tend to use Spline36 myself but which you use is personal preference. You'll probably only see a difference if you're resizing by a reasonable amount. Find a frame with lots of fine detail, check the "apply auto preview" box, and change resizers while looking at the video preview. The difference between them isn't massive.
To sharpen the video you'll need a sharpening filter. I rarely use one myself as I don't think it looks natural, plus they tend to sharpen the noise etc too.
Don't use a denoise filter unless you absolutely need to. Any denoising is a compromise between removing noise and blurring fine detail.
The best way to produce a high quality encode is to start off with a very high quality source and re-encode it without filtering.
If I had to pick a sharpening filter to recommend, it's probably be the SeeSaw script. If you're not familiar with installing and using Avisynth plugins, post back if you need help.
Thank you my friends
How Fix this video
i watching the movie by mpc
Sometimes many shows like image
this movie hdtv 1080i
ID : 1
Format : MPEG Video
Format version : Version 2
Format profile : Main@High
Format settings, BVOP : Yes
Format settings, Matrix : Default
Codec ID : V_MPEG2
Codec ID/Info : MPEG 1 or 2 Video
Duration : 5mn 0s
Bit rate mode : Variable
Bit rate : 11.0 Mbps
Maximum bit rate : 18.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 59.940 fps
Original frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.088
Stream size : 394 MiB (98%)
Default : Yes
Forced : No
Last edited by mmkk; 7th Mar 2014 at 19:54.
Your source is interlaced. You need to inverse telecine (if it's film based), deinterlace, or encode interlaced.
I want script to fix the second video
Last edited by mmkk; 8th Mar 2014 at 07:01.
Rule #1 for any software:
There are no best settings for every case. If they existed, there were no need to choose from several options.
I want script to fix the second video
The problem returned once again in some scenes
The type of video and the method you used to open it can effect MeGUI's ability to analyse it correctly, or as you discovered, analyse it at all. Under some circumstances it mightn't be possible for MeGUI to determine the correct frame rate so it guesses, which can cause problems. The MeGUI logfile provides detailed information as to what it's doing. Judging from your later screenshots they're never going to look like the one in your first post because the quality isn't there to begin with.
Nobody has a crystal ball and screenshots don't do anything but tell you it needs fixing. If you don't know how to provide a sample, say so. The easiest way might be to open the video with MKVMergeGUI and use the split option under the global tab to slit the video into small sections (ie a minute long) and attach one of them to a post for someone else to look at.
If you're using MPC as you said, a good idea would be not to do that any more, and use MPC-HC instead.
It's very frustrating when some asks for help but doesn't make much effort to help others provide that help.
original movie is problem
I deleted movie