I want to try and play the 352x576 clip on my LG bluray player connected to 32" LED TV just to see if everything looks ok, (quality and aspect ratio wise) im using avs and vd (h264 codec, MP4 container)
The clip works on my PC using WMP and VLC using 'MPEG Layer 3, Lame mp3, and AAC-ACM codec,
but
ive put the clip onto a usb pen drive connected it to my LG player (player supports mp4 playback), I dont know what sound option to use as ive tryed 'MPEG Layer 3, Lame mp3, and AAC-ACM codec, but keep getting 'audio not supported'
i'm using the the x264vfw default option for video
sound options i have are
.
.
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 13 of 13
Thread
-
Last edited by bob52; 9th Feb 2014 at 11:34.
-
deja vu!
I replied in the other forum; try resampling the audio to 44.1Khz or 48Khz
http://forum.doom9.org/showthread.php?p=1667104#post1667104 -
Hi
Thanks for the reply, it seems that the orignal Raw WinDV has captured Audio as 32000hz, if i use lame mp3 to change audio settings to 44000hz or 48000Hz keep getting this error
.
.
Vdub file info
.
.
I'm really puzzled as the LG bluray player says in the manual supports 16-48 kHz mp3 so why wont it play mp4 h264 32000 kHz instead of me having to use 44000 or 48000
.
.
. -
You have to use the audio resampling filter, applied before lame (lame can't do the resampling) .
Since you were using avisynth earlier , you could do it there too
AVISource("video.avi")
SSRC(48000)
But if the manual says it supports 16-48Khz MP3, it's probably not going to help
Try remuxing the exported to a different container like MP4 or MKV (e.g. mymp4boxgui, yamb, mkvtoolnix) -
Many thanks for trying to help
I added that to my avs script loaded it into Vdub (used X264vfw) outputted 3 different files (bbbbb.avi (720 x576) bbbbb2 (640x480) bbbbb3 (352x576) just to check what quality looks best
Still the same problem
my full script for bbbbb3.avi
AviSource("c:\gg.avi")
Blur(1.58, 0.0).Sharpen(1.0, 0.0)
SSRC(48000)
spline36resize(352,576)
Loaded it onto my portable HD connected to LG Bluray player
The files show up
.
.
But when i try to load them up
.
.
What Audio option is AAC as one of my files which is mp4 h264 uses AAC , would that option work for my files
.
.
My MediInfo for bbbbb3.avi
.
Code:General Complete name : C:\bbbbb3.avi Format : AVI Format/Info : Audio Video Interleave File size : 7.55 MiB Duration : 20s 440ms Overall bit rate : 3 100 Kbps Writing library : VirtualDub build 35491/release Video ID : 0 Format : AVC Format/Info : Advanced Video Codec Format profile : High@L2.1 Format settings, CABAC : Yes Format settings, ReFrames : 3 frames Codec ID : H264 Duration : 20s 440ms Bit rate : 1 551 Kbps Width : 352 pixels Height : 576 pixels Display aspect ratio : 0.611 Frame rate : 25.000 fps Standard : PAL Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.306 Stream size : 3.78 MiB (50%) Writing library : x264 core 130 r2273kMod b3065e6 Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x13 / me=umh / subme=7 / psy=1 / fade_compensate=0.00 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=2 / lookahead_threads=2 / sliced_threads=1 / slices=2 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=crf / mbtree=0 / crf=23.0000 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00 Audio ID : 1 Format : PCM Format settings, Endianness : Little Format settings, Sign : Signed Codec ID : 1 Duration : 20s 440ms Bit rate mode : Constant Bit rate : 1 536 Kbps Channel(s) : 2 channels Sampling rate : 48.0 KHz Bit depth : 16 bits Stream size : 3.74 MiB (50%) Interleave, duration : 41 ms (1.02 video frame) Interleave, preload duration : 500 ms
Last edited by bob52; 12th Feb 2014 at 14:24.
-
bbbbb3.avi has uncompressed audio according to mediainfo , not MP3 . Maybe you forgot to select it. Try again with lamemp3 with the SSRC(48000) script
Or you can remux to MP4 and convert the audio to AAC in once step with avidemux
Video=> copy
Audio=> AAC
Format=> MP4
If h.264/aac/mp4 is the preferred format for your setup, you should learn how to use the vdub external encoder feature. This way you can export that out of vdub -
sorry my stupidity, re-tryed audio compression using 48000Khz 16 bit stereo 16kps and 48000Khz 320kps CBR Stereo 40kps
The Video Plays (looks awful, wavey lines, compression prob too high)
The Sound plays for the first 2 secs and then stops
MediaInfo
Code:General Complete name : C:\pppppp.avi Format : AVI Format/Info : Audio Video Interleave File size : 10.4 MiB Duration : 20s 440ms Overall bit rate : 4 249 Kbps Writing library : VirtualDub build 35491/release Video ID : 0 Format : AVC Format/Info : Advanced Video Codec Format profile : High@L3.0 Format settings, CABAC : Yes Format settings, ReFrames : 3 frames Codec ID : H264 Duration : 20s 440ms Bit rate : 3 916 Kbps Width : 720 pixels Height : 576 pixels Display aspect ratio : 5:4 Frame rate : 25.000 fps Standard : PAL Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.378 Stream size : 9.54 MiB (92%) Writing library : x264 core 130 r2273kMod b3065e6 Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x13 / me=umh / subme=7 / psy=1 / fade_compensate=0.00 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=2 / lookahead_threads=2 / sliced_threads=1 / slices=2 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=crf / mbtree=0 / crf=23.0000 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00 Audio ID : 1 Format : MPEG Audio Format version : Version 1 Format profile : Layer 3 Mode : Joint stereo Mode extension : MS Stereo Codec ID : 55 Codec ID/Hint : MP3 Duration : 20s 413ms Bit rate mode : Constant Bit rate : 320 Kbps Channel(s) : 2 channels Sampling rate : 48.0 KHz Compression mode : Lossy Stream size : 797 KiB (8%) Alignment : Split accross interleaves Interleave, duration : 41 ms (1.02 video frame) Interleave, preload duration : 500 ms
-
The Video Plays (looks awful, wavey lines, compression prob too high)
Your source was interlaced PAL DV, correct?
Wavy lines - But you didn't encode interlaced , and you didn't deinterlace in the script
Your aspect ratio is also wrong . For 720x576 4:3 PAL add --sar 12:11 to the commandline box in x264 VFW
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 5:4
Scan type : Progressive
The Sound plays for the first 2 secs and then stops
Last edited by poisondeathray; 12th Feb 2014 at 15:13.
-
Many Thanks again for helping
I spent most of the day yesterday trying different audio formats and video settings, I have attached 2 sample clips
352x576.avi and 640x480.avi
Couple of problems
Audio works on both clips on bluray player but is out of synth by about a second even in WMP (see clips)
640x480 is 4:3 in mediaInfo but 352x576 is 0.611 (even when adding SAR 12.11 in use command line)
Since true VHS res is 352x576 i would like to use this option if 4:3 is possible, or im i asking for the impossible (when a VCR used to be connected to your CRT TV via RGB in the 1990s what res were the tapes playing at , was is 352x576 4:3)
.
.
.
.
.
.
.
Could the sound problem be that x264vfw is producing a Prog Scan ouput from a Interlace source (i want the output to stay interlace)
i cant seem to switch Prog scan option off, are these the options
.
. -
1) RE : Aspect Ratio
352x576 requires --sar 24:11
DAR = FAR x SAR
Display Aspect Ratio = Frame Aspect Ratio x Sample Aspect Ratio
4/3 = 352/576 x 24/11
2) RE: Sound delay
If it's out of sync in WMP (try VLC, MPCHC as well), the the issue isn't your hardware
AVI is a poor container for h.264 with b-frames. Try remuxing as suggested earlier to MP4 (e.g. YAMB, MyMP4BoxGUI)
3) RE: interlaced encoding
Try adding -bff to the extra commandline box. It might not work in the VFW version (not sure, maybe VFW can't encode interlaced; I'll check it out later if I have time) -
Sync is fine when remuxed mp4 container with ffmpeg ; at least in a software player. I set the DAR flag to 4:3 as well (so it's a container flag, not a bitstream flag . Some hardware players might prefer one over the other)
Code:ffmpeg -i "352x576.avi" -vcodec copy -acodec copy -aspect 4:3 -movflags faststart remux.mp4
remux.mp4
https://forum.videohelp.com/attachment.php?attachmentid=23606&stc=1&d=1392407977 -
x264vfw interlaced encoding is working ok here when bff is selected in the GUI checkbox
I'm using komisar's version
http://komisar.gin.by/
Another thing you can try for sync is "Virtualdub Hack" on the 1st tab . But AVI container is terrible for h264, especially if you have b-frames. Nothing but problems -
Similar Threads
-
How do I Get Surround Sound to Work in Media Player Classic Home Cinema?
By Stealth3si in forum ComputerReplies: 0Last Post: 1st Feb 2013, 22:23 -
Subs work in VLC but do not work in the DVD Player through USB
By faithhealer in forum SubtitleReplies: 4Last Post: 1st Jul 2012, 20:40 -
Audio Sound File Saved - Canot Hear Sound - Total Recorder
By Teac23 in forum ComputerReplies: 1Last Post: 15th Apr 2011, 14:29 -
how do I install x264.exe to work AND to work with Lemings GUI?
By Krelmaneck in forum Newbie / General discussionsReplies: 1Last Post: 14th Nov 2010, 22:13 -
Why doesn't sound work when playing through local network?
By Obamargarine in forum Software PlayingReplies: 1Last Post: 23rd Feb 2009, 13:39