AverTV HD DVR drivers

[Edged]

Hello,

I recently reformatted my computer and lost all of the original files I had setup with this capture card, but I've noticed and read, that the newest drivers won't allow the HDCP workaround. So, I was wondering if anyone has this card has been able to get any use out of the newer drivers and software, or if you have the older drivers, I'd appreciate if you uploaded them.

Thanks.

[Cauptain]

Hi Edged,

Latest drivers with HDMI capture trick: AverMedia.AverTV.HD.DVR.32.and.64.bit.Drivers.v1.1 2.0.22

Aver Media Center 3D for C027 (your card): AMC 3D

Coolest software capture (All capture cards): Amarec Tv 2.10


Cauptain

[tttony]

Thank you so much Cauptain I was looking for those driver over the net and you save me time

Thanks again

[besthit]

hello
need a bit of help
everythings setup OK, except Amarec

1. when starting Amarec, recording BUTTON , it ask for drivers, ... ???
2. is there a guide, outhere, to setup correctly, for 720p and 1080i, Amarec Tv ?

thanks
Al.

[Cauptain]

2. is there a guide, outhere, to setup correctly, for 720p and 1080i, Amarec Tv ?

My AVERTV on AMARECTV config:

• 
• 
• 
• 
• 
• 
• 
• 
• 

[besthit]

ok thanks
will try this today or , soon, tomorrow morning

[besthit]

for Cauptain.......
did a little setup this morning,, just for fun,
Will do a bigger setup with bluray, game box, hdmi( hdcp) later today.
I did your setup.
i use amarec 2.10b
I have some differences with your setup. i explain
1. in Graph 3 (live) tap. i have more option, in the lower part of the box, ( under the live enable check box.... ???
2. in Preset tab, eveythings in gray, so no options for me there ??????
3. in Recording tab, have many codec, but the one you use is missing ( ULY2) ??? By the way,
why you use this one, especially.

thanks again

[besthit]

for everyone..... is there a good powered hdmi splitter outhere, ?
1. dont want problems with Hdcp
2. i have to feed a big ACL TV , and the aver card, at the same time


thanks

[Cauptain]

Some questions...

You are welcome besthit,

1 - Its because you have installed the "live_setup.exe." I dont.

2 - Click in MENU and uncheck "Disable Preset". All options will be enable.

3 - I use UT VIDEO CODEC because it is already compatible with AVERHD input color (YUY2). This tip came from one of most active users this forum "JAGABO" (Thank you Jag).


Claudio

[rOOmUSh]

Hello, guys!

I have a question about this card.

Will i be able to stream from that card using FMLE? Will the device be seen by FMLE same as Osprey 450e for example?
Right now we use above mentioned Osprey 450e, but would like to stream HD without buying any HD/SDI IRDs.


The setup is like this.

STB HDMI OUT > AVERTV HDMI IN > FMLE see the device > RTMP server

Thank you!

[NJRoadfan]

Hello, guys!

I have a question about this card.

Will i be able to stream from that card using FMLE? Will the device be seen by FMLE same as Osprey 450e for example?
Right now we use above mentioned Osprey 450e, but would like to stream HD without buying any HD/SDI IRDs.

Yes, you can use this card with Flash Media Live Encoder. I have done so without a problem.

[hlaycanson]

Bumping this because of a problem with my avertv hd dvr:

I was actually using the drivers and amarectv app posted in this thread and it was functioning fine, until during one capture it stopped and began to give me errors in gibberish. Like,
"I having video fdsh .x0005 with clock far." as well as various other ones that were entirely symbols. Amarec has ceased to function even after uninstall/reinstall.

My question is either "WTF happened..." or "Does anyone know other compatible capturing software?"

[Cauptain]

Bumping this because of a problem with my avertv hd dvr:

I was actually using the drivers and amarectv app posted in this thread and it was functioning fine, until during one capture it stopped and began to give me errors in gibberish. Like,
"I having video fdsh .x0005 with clock far." as well as various other ones that were entirely symbols. Amarec has ceased to function even after uninstall/reinstall.

My question is either "WTF happened..." or "Does anyone know other compatible capturing software?"

Hello hlaycanson,

On amarecTV menu option, GRAPH 1 and PRESET, uncheck USE CLOCK.

Select other "encoder codec". Try UT VIDEO CODEC and disable it in FFDSHOW DECODER TAB (RAW).

If not work, try Virtualdub or VH Capture.


Claudio

[hlaycanson]

Thank you; I actually got it to work after uninstalling/reinstalling a few times in frustration. I guess 5 makes it work again, although everything looks interlaced even though I have everything I can find concerning that set to be progressive/deinterlaced.

Should I be using a specific codec for 1080i component signal?

[Cauptain]

Thank you; I actually got it to work after uninstalling/reinstalling a few times in frustration. I guess 5 makes it work again, although everything looks interlaced even though I have everything I can find concerning that set to be progressive/deinterlaced.

Should I be using a specific codec for 1080i component signal?

UT Video Codec has a INTERLACED checkbox, enable it. For me is the very best codec to record with AVERTV HD.

But AmarecTV has a option to "record with filter". You enable Deinterlaced by VGA on GRAPH 2 and set Deinterlace on PRESET, go to RECORDING tab and enable Processing Filter ON. Will save the movie in 1080p.



Claudio

[hlaycanson]

Thank you for the help. I am having two issues:
-I downloaded the UT video codec, but amarec doesn't add it to the list of codecs. Virtualdub sees it, though.
-Where is the deinterlace setting in the preset tab? The other two settings I have as you describe.

Also, within the program I got this to pop up in notpad:

; AmaRecTV Live Auto Deinterlacing List --------------
;
; *** Format ***
; - ip
; p : Progressiv (not use deinterlacing).
; i : Interlace (use deinterlaceing).
;
; - field
; t : Top field first.
; b : Bottom field first.
; a : Auto select.
;------------------------------------------------------

; ip field min_w min_h min_fps max_w max_h max_fps

How do I enable settings under "ip"? edit: nvm those are for the source video i think

[Cauptain]

Thank you for the help. I am having two issues:
-I downloaded the UT video codec, but amarec doesn't add it to the list of codecs. Virtualdub sees it, though.
-Where is the deinterlace setting in the preset tab? The other two settings I have as you describe.

Also, within the program I got this to pop up in notpad:

; AmaRecTV Live Auto Deinterlacing List --------------
;
; *** Format ***
; - ip
; p : Progressiv (not use deinterlacing).
; i : Interlace (use deinterlaceing).
;
; - field
; t : Top field first.
; b : Bottom field first.
; a : Auto select.
;------------------------------------------------------

; ip field min_w min_h min_fps max_w max_h max_fps

How do I enable settings under "ip"? edit: nvm those are for the source video i think

Strange. never problem with UT Video codec. Whats your Windows Version?

For DEINTERLACE use this:






For auto_deint.ini, use this config:





Claudio

[hlaycanson]

You are a savior, Claudio. I got it to work with those settings, minus the UT codec.

[Cauptain]

You are a savior, Claudio. I got it to work with those settings, minus the UT codec.

Hi hlaycanson

Whats Windows version??



Claudio

[detroit1]

Today I actually updated the driver on the HD80e and now the amarectv software is not working right; I am getting this message
can anyone let me know how to correct this?
Today, I had uninstall my capture card and then re install it and update the driver and now when I open amarectv is says:

HRESULT = 8007001f

A device attached to this system is not functioning

Code : MpMediacontrol - > Run


I tried a couple other recording softwares that I have and they worked fine after updating my driver but amarectv is giving this message and amarectv is a better software ; that’s why I use it to record. It was working normal until after I updated the driver for my capture device


I hope someone knows to to correct this

[leoman924]

i followed all the directions and all i get is a green screen

[Cauptain]

Today I actually updated the driver on the HD80e and now the amarectv software is not working right; I am getting this message
can anyone let me know how to correct this?
Today, I had uninstall my capture card and then re install it and update the driver and now when I open amarectv is says:

HRESULT = 8007001f

A device attached to this system is not functioning

Code : MpMediacontrol - > Run


I tried a couple other recording softwares that I have and they worked fine after updating my driver but amarectv is giving this message and amarectv is a better software ; that’s why I use it to record. It was working normal until after I updated the driver for my capture device


I hope someone knows to to correct this

Hi detroit1,

Unnistall all codec packs, run CCLEANER, reboot your PC and try again.

Do you have X64 OS? If yes, try Virtualdub 64 bits , capture mode.




Claudio

[Cauptain]

i followed all the directions and all i get is a green screen

Do you set correct input config? Signal? Framerate?

Whats OS?



Claudio

[leoman924]

i was able to fix it, using the wrong resolution. lol, using it just fine now and looks awsome

[Polaris75]

Today I actually updated the driver on the HD80e and now the amarectv software is not working right; I am getting this message
can anyone let me know how to correct this?
Today, I had uninstall my capture card and then re install it and update the driver and now when I open amarectv is says:

HRESULT = 8007001f

A device attached to this system is not functioning

Code : MpMediacontrol - > Run


I tried a couple other recording softwares that I have and they worked fine after updating my driver but amarectv is giving this message and amarectv is a better software ; that’s why I use it to record. It was working normal until after I updated the driver for my capture device


I hope someone knows to to correct this

I'm getting this error as well. 1.12.0.22 x64 Win7 drivers, AMC 1.7.9 and AMC_HDMI_HDCP_PROTECT_REMOVE_1.7.9.11051801 from "AVERTV HD HDMI HDCP PROTECT REMOVE.rar" that I found somewhere on this board. Tried removing everything including codec packs and ran CCleaner and started again from scratch but I'm still getting the same thing. I used Cauptain's settings exactly in Amarec TV. I get an error with VirtualDub x64 as well. Anyone have any ideas? Thanks.