VideoHelp Forum
+ Reply to Thread
Results 1 to 5 of 5
Thread
  1. Member
    Join Date
    Jan 2011
    Location
    turkey
    Search Comp PM
    hello my **.ts file convert to mkv or mpeg2.ts .... I only change video bitrate how the programs do it ....thank you for help...
    Quote Quote  
  2. I'm a MEGA Super Moderator Baldrick's Avatar
    Join Date
    Aug 2000
    Location
    Sweden
    Search Comp PM
    Most encoders can copy the audio like Handbrake, xvid4psp, avidemux, xmedia recode. Just be sure to select copy under the audio settings. Set the video codec as same as your source and then set the video bitrate.
    Quote Quote  
  3. Member PuzZLeR's Avatar
    Join Date
    Oct 2006
    Location
    Toronto Canada
    Search Comp PM
    Or you can just go ahead and encode your TS file with any encoder you wish, as long as you mux a copy of the source audio with the new encoded stream.

    To demux the audio from the TS, just use TMPGEnc (if MPEG-2), or tsMuxeR.

    To mux the audio with the new stream into MKV just use MKVMerge.
    I hate VHS. I always did.
    Quote Quote  
  4. Member
    Join Date
    Jan 2011
    Location
    turkey
    Search Comp PM
    General
    ID : 50300 (0xC47C)
    Complete name : G:\test1.ts
    Format : MPEG-TS
    File size : 4.00 GiB ----------convert than this size 2.00 gb
    Duration : 1h 53mn
    Overall bit rate : 5 032 Kbps

    Video
    ID : 2113 (0x841)
    Menu ID : 612 (0x264)
    Format : MPEG Video
    Format version : Version 2
    Format profile : Main@Main
    Format settings, BVOP : Yes
    Format settings, Matrix : Default
    Format settings, GOP : M=2, N=12
    Codec ID : 2
    Duration : 1h 53mn
    Bit rate mode : Constant
    Bit rate : 4 395 Kbps ------- only change bitrate
    Nominal bit rate : 6 960 Kbps -------- only change bitrate
    Width : 720 pixels
    Height : 576 pixels
    Display aspect ratio : 2.35:1
    Frame rate : 25.000 fps
    Standard : PAL
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Interlaced
    Scan order : Top Field First
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.424
    Stream size : 3.49 GiB (87%)

    Audio #1
    ID : 2225 (0x8B1)
    Menu ID : 612 (0x264)
    Format : MPEG Audio
    Format version : Version 1
    Format profile : Layer 2
    Codec ID : 4
    Duration : 1h 53mn
    Bit rate mode : Constant
    Bit rate : 192 Kbps
    Channel(s) : 2 channels
    Sampling rate : 48.0 KHz
    Compression mode : Lossy
    Delay relative to video : -72ms
    Stream size : 156 MiB (4%)
    Language : Turkish
    Language, more info : Clean effects

    Audio #2
    ID : 2226 (0x8B2)
    Menu ID : 612 (0x264)
    Format : MPEG Audio
    Format version : Version 1
    Format profile : Layer 2
    Codec ID : 4
    Duration : 1h 53mn
    Bit rate mode : Constant
    Bit rate : 192 Kbps
    Channel(s) : 2 channels
    Sampling rate : 48.0 KHz
    Compression mode : Lossy
    Delay relative to video : -18ms
    Stream size : 156 MiB (4%)
    Language : orj
    Language, more info : Clean effects

    Text
    ID : 2511 (0x9CF)
    Menu ID : 612 (0x264)
    Format : DVB Subtitle
    Codec ID : 6
    Language : Turkish
    Quote Quote  
  5. Member PuzZLeR's Avatar
    Join Date
    Oct 2006
    Location
    Toronto Canada
    Search Comp PM
    I'm not sure of any encoding tool that does pass-through with two MP2 audio streams, but you can go ahead and use HandBrake anyway (disregarding audio in the app for the moment):

    HandBrake (free):
    Load your file -> container MKV File -> Video tab -> select Target Size (MB) -> enter 2000

    Then use tsMuxer (free) to demux both the MP2 audio streams (one at a time, or both, if you like) from the TS source:
    Load your file -> select only the audio format -> enable Demux -> start Muxing

    Then use MKVMerge (free) to remux your new file:
    Load your new MKV file from HandBrake -> load both the audio files -> select only the video stream from the MKV file and the two audio files (MPEG-1 layer 2) -> start Muxing

    Your result will be an MKV file with the video stream of reduced bitrate and the two audio files from the source.

    However, keep in mind that you are encoding to AVC, which demands some knowledge of its features. However it's much more efficient at maintaining quality at lower bitrates you want than MPEG-2.
    Last edited by PuzZLeR; 24th Jan 2011 at 19:52.
    I hate VHS. I always did.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!