i am using adobe premiere CS5 to capture old VHS tapes to record to DVD.
i am capturing at 4:3 full screen
preset: standard 48 kHz
frame size: 720h x 480v (0.9091)
when i export the final video and watch it, the video does not fill the available frame. when i burn it to dvd using adobe encore, i get the same results while watching the dvd on regular tubed tv and HD tv.
it is hard to explain, which is why i have had no luck searching google for an answer. so i have attatched a screenshot in order to describe what i mean
if you notice, there is black, unused space on the top and bottom edges of the exported video. this screen shot was taken while watching the video in windows media player, maximized to full screen. when i watch the dvd on a 4:3 tubed television, the image is in the middle of the screen with black edges around all the sides. when i watch it on an HD 6:9 television, it does the same thing, with the top and bottom edges not going to the edge of the available screen. when you go back to the menu on the dvd (which i created in adobe encore) the menu DOES use the entire screen and does not have this problem
i wish to make the video take up all the available space. are there some settings i dont have set correctly? i dont mind recapturing the video if i need to
please let me know if i am not being entirely clear on this and i can post more info
thanks in advance!!
+ Reply to Thread
Results 1 to 5 of 5
Last edited by bteamstephen; 10th Dec 2010 at 15:40.
Four settings affect your result.
1. Project setting - Should be 720x480 4:3 aspect 0.9091
2. Import/Capture clip properties
- Should be 720x480 4:3 aspect (0.9091) or 640x480 4:3 aspect (square pixel)
3. MPeg2 encoder - Should be 720x480 4:3 aspect 0.9091
4. DVD project - Should be 720x480 4:3 aspect 0.9091
One or more of these is set to Wide 16:9.
The side pillar bars result when 4:3 video is displayed in a 16:9 frame.
Four bars result when the 16:9 pillar box is letterboxed into a 4:3 frame.
Last edited by edDV; 10th Dec 2010 at 17:13.Recommends: Kiva.org - Loans that change lives.
you are right. i see now that when i go to "sequence settings" that under video it is set to:
frame size 720 horizontal 480 vertical 16:9
as you can see from my screen shot, i am unable to change these options because they are grey and i cannot click to change them.
the pixel aspect ratio is set to D1/DV NTSC Widescreen 16:9, but again, i cannot use the drop down menu to change this.
how do i fix this? do i need to recapture? or rebuild the project?
Oh i believe i figured it out.
although i THOUGHT i had originally set the sequence settings to standard 4:3, i must have actually set it to widescreen
arrrggggghhh.....dumb mistake! thanks for the help though!