Hello all
I'm having some pixelation problems. I have a collection of ripped DVD's.. some downloaded, some ripped from my personal DVD collection. I have mostly MKV files, but some MP4 and a few AVI. The MKV's are mostly H.264 encoded. Those movies are sitting on a Windows Home Server box (along with some music, pictures, etc..)
I built a Home Theater PC about a year ago. It's undergone some changes (I added a cablecard tuner and a power amp for driving some outdoor speakers), but it's pretty much a high-end PC based on MSI's media live diva platform (http://www.newegg.com/Product/Product.aspx?Item=N82E16813130206). I would like to be able to pull movies from my server and play them back on my HTPC.
I have been unable to play back any of the movies in my collection without severe pixelation problems. The HTPC is connected via 10-baseT cabling, and the network load is not being taxed, so I don;t think it's bandwidth. I've tried every codec pack imaginable, and I either get no change at all or a slight worsening of the problem. I have tried K-lite, CCCP, Shark 007's codec pack, and a manual install of the latest versions of ffdshow, haali media splitter and ac3filter. No change at all. I've transferred movies from my server and played them back locally, but no difference.
These problems are not just related to my HTPC, my workstation PC and my laptop show the same exact pixelation problems at the same times in the movies. These movies have played back correctly not long ago. I don;t know what may have changed. I've updated drivers on all GPU's, run registry cleaners and fiddled with ffdshow's post-processing and deinterlacing options for weeks now, but I can make no progress. I'm now using CoreAVC's decoder for H.264 decoding on the HTPC, but I get no improvement. DIVX and ffdshow decoders also show the same problems.
I have only one hint: There's a couple of graphs in Haali Media Splitter. I have noticed that while playing back a movie, the top graph in Haali shows peaks that roughly correspond to instances of intense pixelation in the movie. I don't know what that means or what I can do about it.
I cannot believe that all 200+ High Definition videos on my server are corrupted, but I seem to be out of options.
Anyone have any ideas?? I'm running out of rope here..
I will post screenshots of what I'm seeing later tonight (I'm at work right now).
Thanks in advance for any expended brainpower..
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 11 of 11
Thread
-
-
Have you used Task Manager to review the CPU usage during playback ?
Have you tried playback in MPC-HC using it's filters? Perhaps you can enable DXVA ?
I think the best bet is Haali+FFDshow. Don't really need those other packs.
Render the movies in GraphStudio if you want to see the filter chain being used.Last edited by davexnet; 18th Nov 2010 at 22:26. Reason: more info
-
Ok,
Attached are some screenshots of one of my mkv files (Avatar). Haali media splitter shows a graph that peaks when the pixelation is particularly bad. CPU usage hovered around 20% with occasional peaks ~40%. This is my workstation PC that uses a dual core AMD 3GHz processor and 2Gb of memory. I'll repost the same shots using MPC-HC.
-
It has a splitter built in.
View/Options/Internal filers.
You really shouldn't install multiple codec packs.
In any case, they mostly all will all give you the same basic codecs.
You might try other media players though, that have their own built in codecs.
Eg, VLC.
And others at https://www.videohelp.com/tools/sections/video-players -
Guys,
Thanks for all your responses. I ran a test using VLC, but I'm seeing the same pixelation. The problems appears independent of player. I continued watching the movie while keeping am eye on the mysterious Haali media splitter graph window. As the movie plays, that graph really levels out and the pixelation seems to become less frequent.
I really need to know what that graph is telling me. Anybody have any ideas?
I have stripped away all codec packs that I previously had installed and removed any relics left over from previous troubleshooting efforts. I have only CoreAVC professional, ac3filter version 1.63b and the Haali media splitter version 1.10.262.12 (Latest version) installed. -
It's a bitrate graph for audio & video. Big action scenes will get more bitrate and show a peak
If you're playing this over a network, there is a tiny tiny chance that it's exceeding the bandwith and causing the pixellation (very unlikely, unless you have concurrent traffic)
If you play locally on a HDD and on other computers, this rules out bandwidth as the issue
Try playing on a friends' setup, or reverting to older drivers - it might be the newest drivers are causing the issue -
Is it normal to see the video bitrate graph bouncing all around like that and the audio graph constant? What can I do to control the bitrate? Is it possible to change the bitrate of an mkv file?
-
Yes completely normal.
Things like titles, credits don't need much bitrate, but action sequences require lots of bitrate. It would look like crap if the bitrate didn't fluctuate to compensate for the complexity of the scene
What can I do to control the bitrate? Is it possible to change the bitrate of an mkv file?
I would determine if the files / HDD are corrupted first - if they playback ok on a different setup, then it's likely a playback/display issue. But you've already tried laptop, workstation - so maybe the same bad drivers are on all your systems - so go check at a friend's house -
Hello all,
Thanks for all the assistance with this pixelation issue. I think I've figured it out now, so I thought I'd post back and close the thread.
I have a total of six hard drives in my windows home server. Two of those drives are part of the windows storage pool (The WHS Drive Extender http://en.wikipedia.org/wiki/Windows_Home_Server#Drive_Extender) The remaining four are connected to a Silicon Image RAID 5 controller. My movie collection was the only data on the RAID 5 array because I wanted the additional read performance that you typically get from RAID 5. My problem turned out to be the worst case scenario.. all of the movies in my collection are corrupted. One of the drives on the controller was intermittent and dropped out frequently. I opened the case and found the plastic sheath on one of the controller's SATA ports broken off.
Just to confirm my suspicion, I downloaded a couple of movies, placed them on the extender drives and they played back flawlessly. I have since repaired the damaged SATA port on my controller, and my array appears to be working, but If I place a copy of one of the newly downloaded movies on the RAID 5 array and play it back, it's pixelated again.
Is this just a bad idea running these movies from the RAID 5 array? Should I ditch this idea alltogether and stick with the drive extender? Maybe there isn't as much of a performance boost in RAID 5 compared to direct disk access as I thought.. maybe even a performance hit.
Any thoughts? -
Sounds like something is wrong with that RAID setup. It should be more than be able to handle the read throughput of a movie, even HD that maxes out around 55MB/s.
Things to check:
- Updated RAID drivers
- Latest BIOS (if onboard RAID)
- Using the same drives (size, speed, make/model)
- Using same type (ide/sata)
Have you done any speed tests on the array? Simply copy some large files to/from the RAID to your other drives and note the sustained throughput. (Best done after a defrag to eliminate disk thrashing as the issue.)Have a good one,
neomaine
NEW! VideoHelp.com F@H team 166011!
http://fah-web.stanford.edu/cgi-bin/main.py?qtype=teampage&teamnum=166011
Folding@Home FAQ and download: http://folding.stanford.edu/
Similar Threads
-
MKV guide, Play MKV, MKV to AVI, MKV to DVD, MKV to MP4, MKV to Blu-ray
By Baldrick in forum Newbie / General discussionsReplies: 55Last Post: 29th Jun 2012, 11:19 -
Convert MKV files to AVI OR MP4 for Playing on Sony EX520 TV via UBS port
By premsoni4u in forum Video ConversionReplies: 2Last Post: 16th Jul 2011, 04:45 -
Convert AVI (miniDV) to MKV/MP4, large files only convert partially
By Video Eddie in forum Video ConversionReplies: 0Last Post: 3rd Jan 2011, 05:44 -
How to fix uneven audio volume in MKV/MP4/AVI files?
By ConverterCrazy in forum RestorationReplies: 5Last Post: 18th Jul 2010, 23:26 -
HOW TO EDIT MPEG4 FILES IN (DIVX).AVI, .mkv and .mp4 Containers
By jhb50 in forum User guidesReplies: 0Last Post: 18th Jul 2009, 22:32