VideoHelp Forum
+ Reply to Thread
Results 1 to 21 of 21
Thread
  1. Member
    Join Date
    May 2004
    Location
    United States
    Search PM
    I have about 5 hours of old video which needs help. It was originally shot using a VHS-C camcorder about 10 years ago. It was later directly transferred from VHS-C to Mini-DV tape using two camcorders. I want to edit & make home movies from this video using software similar to VideoStudio11, which I already have. To do so, I will of course have to first load the Mini-DV video to my hard drive.

    But before I start, my question is: How can I fix/enhance the quality of the video as part of this complex process - using GUI software if possible. I saw some thing online called "vReveal" which portrays the sort of enhancement that I hope to achieve. But I prefer free software where practical.

    It seems likely that there are other, perhaps better ways to do this, but I need to be pointed in the right direction by others who have already done so.

    Best regards, Richard
    Quote Quote  
  2. It depend on what exactly you intend to enchance or "fix" , but some free options are virtualdub with dozens of plugins.

    Avisynth isn't GUI based, but is very powerful and has great filters for just about everything as well

    Both are free
    Quote Quote  
  3. Video Restorer lordsmurf's Avatar
    Join Date
    Jun 2003
    Location
    dFAQ.us/lordsmurf
    Search Comp PM
    vReveal isn't very impressive. You want to use VirtualDub.

    Many articles in this forum, as well as at
    http://www.digitalfaq.com/forum/forumdisplay.php/restore-filter-improve-17.html
    http://www.digitalfaq.com/forum/showthread.php/virtualdub-filters-pre-1727.html

    For specific tips, you have to list specific errors.

    Being just 5 hours worth, consider seeking professional services for this.
    Want my help? Ask here! (not via PM!)
    FAQs: Best Blank DiscsBest TBCsBest VCRs for captureRestore VHS
    Quote Quote  
  4. Member
    Join Date
    May 2004
    Location
    United States
    Search PM
    Thanks Poisondeathray & Lordsmurf for your helpful replies. I'll be checking out these tips.

    Lordsmurf. I am not yet quite sure what needs to be enhanced, but I wanted to look into the possible options before I started. But from what I recall, the quality of the video itself isn't really that bad, the images are a bit less sharp, as if they were of a lower resolution & the colors could use more saturation. I believe it's mostly that it was originally shot in analog so the appearance doesn't look as good as the digital quality that we've become accustomed to seeing.

    I know the end result isn't going to be like video originally shot in digital, but any improvement will be welcomed. If you know, about how much would 5 hours of video cost to be professionally enhanced?
    Best regards, Richard
    Quote Quote  
  5. VideoStudio 11 can sharpen and increase saturation, maybe not as well as VirtualDub.
    Quote Quote  
  6. Member
    Join Date
    May 2004
    Location
    United States
    Search PM
    Thanks Moviegeek. I have tinkered with the filters in VideoStudio 11 so I know a bit about them.

    Some one suggested DeeMon Video Enhancer to me. What do you all think of it - compared to VirtualDub, VideoStudio 11, or other possible options?
    Best regards, Richard
    Quote Quote  
  7. Video Restorer lordsmurf's Avatar
    Join Date
    Jun 2003
    Location
    dFAQ.us/lordsmurf
    Search Comp PM
    Originally Posted by rckowal
    it was originally shot in analog so the appearance doesn't look as good as the digital quality that we've become accustomed to seeing.
    There's not much you can do for this. Artificial sharpening needed to be done in the analog domain, before it was converted to DV. All you'll end up doing now is aliasing the video, and mucking up the interlacing, by trying to sharpen in software.
    Want my help? Ask here! (not via PM!)
    FAQs: Best Blank DiscsBest TBCsBest VCRs for captureRestore VHS
    Quote Quote  
  8. Member
    Join Date
    May 2004
    Location
    United States
    Search PM
    Hi Lordsmurf,

    Well, all isn't lost since I still have the original VHS cassettes and I believe my son still has the camcorder used to shoot them. I understand sharpening from working with stills in Photoshop, etc.

    From what I gather then, it appears that I should use VirtualDub (with filters as posted in the Digital FAQ forum) then use those filters to sharpen, etc. in the analog domain?

    I haven't even downloaded VirtualDub yet so I'm still totally ignorant of what it does. Please tell me if I capture the analog clips using Virtual Dub or capture direct to my hard drive then process with VitualDub?
    Best regards, Richard
    Quote Quote  
  9. Member
    Join Date
    Apr 2005
    Location
    Chicago suburbs, IL
    Search Comp PM
    Originally Posted by rckowal
    Hi Lordsmurf,

    Well, all isn't lost since I still have the original VHS cassettes and I believe my son still has the camcorder used to shoot them. I understand sharpening from working with stills in Photoshop, etc.

    From what I gather then, it appears that I should use VirtualDub (with filters as posted in the Digital FAQ forum) then use those filters to sharpen, etc. in the analog domain?

    I haven't even downloaded VirtualDub yet so I'm still totally ignorant of what it does. Please tell me if I capture the analog clips using Virtual Dub or capture direct to my hard drive then process with VitualDub?
    No, if its on your computer, its digital. I believe Lordsmurf was suggesting something similar to a detailer or proc
    amp during the capture process to attempt to sharpen the image. Its more difficult to sharpen once the video has
    been digitized without creating other artifacts.
    Quote Quote  
  10. Member
    Join Date
    Aug 2002
    Location
    South Florida
    Search Comp PM
    VideoStudio Pro X2 has better enhancement capabilities than VS 11. I would upgrade to it. I have used it with success.
    Quote Quote  
  11. Member
    Join Date
    May 2004
    Location
    United States
    Search PM
    Showtaper & Pepegot1, Thanks.

    The cost of detailers or proc hardware is prohibitive for my amateur home video project. As a result, I will have to settle for what can be done with what I have or can be added at minimal cost. Please remember folks, this is a low budget, poor boy project.

    Given these limitations, what would be the best option for me to use to try to enhance the sharpness & saturation (no matter how little it might be) of my Video8 analog tapes, or the Video8 transferred to DV tape? I have VideoStudio 11 &/or Virtual Dub. I also have the Video8 camcorder with which the clips were originally shot. I would consider upgrading VS 11 to VS ProX2 if it will enhance my clips noticeably better than VS11.

    Still confused but learning. Richard
    Quote Quote  
  12. Member buckethead's Avatar
    Join Date
    Jul 2008
    Location
    United States
    Search Comp PM
    If low cost and/or free is a priority, I would definitely recommend virtualdub. Two of my favorite plug-ins are colormill and msu smart sharpen. There are tons of plug-ins available for free, so download and experiment to your heart's content. You'll develop a feel as you go ...
    Quote Quote  
  13. Member 2Bdecided's Avatar
    Join Date
    Nov 2007
    Location
    United Kingdom
    Search Comp PM
    Originally Posted by showtaper
    Its more difficult to sharpen once the video has been digitized without creating other artifacts.
    I know LordSmurf thinks that, but respectfully I think he's wrong - if you capture losslessly.

    You can do anything in the digital domain that you can in the analogue domain - and far more besides.

    The only "problem" is missing information - things that didn't get captured e.g. like sync pulses - which mean you can't TBC once the video is inside a PC.

    But 8-bit capture of VHS has already dragged all the miserable picture information into the digital domain, including what your proc amp and detailer had to work with.


    If you capture to lossy (including DV), then sometimes subsequent sharpening may increase block artefacts to make them visible.

    If you take typical VHS, sharpen it and boost the chroma, it'll look like worse VHS - and nothing like digital. You need smart noise removal, chroma repair, and maybe very gentle sharpening, to make it look like good VHS - and that's the best you can do.

    Cheers,
    David.
    Quote Quote  
  14. Video Restorer lordsmurf's Avatar
    Join Date
    Jun 2003
    Location
    dFAQ.us/lordsmurf
    Search Comp PM
    Lossless or uncompressed -- once video is digitized, you lose a LOT of options on what can be done, when the source is analog video.

    What you know about still photography really does not apply to video restoration. The temporal aspect makes it at least 25x more complicated. My knowledge/experience/skills at video actually come second to photography -- there is not much overlap after shooting is done.
    Want my help? Ask here! (not via PM!)
    FAQs: Best Blank DiscsBest TBCsBest VCRs for captureRestore VHS
    Quote Quote  
  15. Originally Posted by lordsmurf
    Artificial sharpening needed to be done in the analog domain, before it was converted to DV. All you'll end up doing now is aliasing the video, and mucking up the interlacing, by trying to sharpen in software.
    Originally Posted by lordsmurf
    Lossless or uncompressed -- once video is digitized, you lose a LOT of options on what can be done, when the source is analog video.
    Since the first statement is plainly wrong, I doubt the veracity of the second. I'm with 2Bdecided on this - once captured as lossless, there are a ton of choices for cleanup available in software. If sharpening, obviously you separate the fields (or, better, bob the video) before then sharpening (gently) and reinterlacing. Most of the other cleanup should also be done with the fields separated.
    Quote Quote  
  16. Member 2Bdecided's Avatar
    Join Date
    Nov 2007
    Location
    United Kingdom
    Search Comp PM
    Let's be honest - VHS luma doesn't really need sharpening vertically (unless the original source did) - all the VHS luma damage is in the horizontal direction, and so can be fixed by sharpening horizontally only - hence no need to worry about interlacing at all.

    Chroma is a different matter, and slightly different NTSC vs PAL - and worse with multi-generation.

    Cheers,
    David.
    Quote Quote  
  17. Banned
    Join Date
    Dec 2011
    Location
    way East Europe (WEE)
    Search Comp PM
    Originally Posted by MOVIEGEEK View Post
    VideoStudio 11 can sharpen and increase saturation, maybe not as well as my VirtualDub.
    v1.9.4

    Virtualdub has no such thing as 'advanced ' sharp-ing capabilities. If you need professional Hi-Q quality get a programmer h3lp for a specialised plug-in done for you , or doo it yourself . ....t`s at a touch of your fingertips

    I wish you post a videosample to have common refference for quality you have pleaes
    Quote Quote  
  18. @ledishis,

    Yes there are plug-ins for VirtualDub that sharpen and I don't have to post a sample to prove to you what I know.
    http://compression.ru/video/smart_sharpen/index_en.html

    BTW: resurrecting an old thread(almost 2 years old) is looked down upon on VH.
    Quote Quote  
  19. Banned
    Join Date
    Oct 2004
    Location
    New York, US
    Search Comp PM
    The best anyone can offer for suggestions will be highly general at this point. A very short sample clip is really what the forum needs to go any further. A few screen captures as quality JPG would be a minimum, since still photos don't really convey temporal noise or other problems, but a still is better than nothing. Right now readers have little to go on.
    Quote Quote  
  20. Member 2Bdecided's Avatar
    Join Date
    Nov 2007
    Location
    United Kingdom
    Search Comp PM
    Originally Posted by sanlyn View Post
    The best anyone can offer for suggestions will be highly general at this point. A very short sample clip is really what the forum needs to go any further. A few screen captures as quality JPG would be a minimum, since still photos don't really convey temporal noise or other problems, but a still is better than nothing. Right now readers have little to go on.
    Given the (nearly) two years since the original post, I don't think we need to worry

    Cheers,
    David.
    Quote Quote  
  21. Banned
    Join Date
    Oct 2004
    Location
    New York, US
    Search Comp PM
    Oooooops. Forgot about that early post, 2B. My bad.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!