The DVI port on my Hanns-g LCD stopped working? The standard VGA port will work,but the DVI port will not produce an image. I tried 2 different DVI-to-DVI cables and an HDMI - to DVI cable but no image on screen. I then hooked up standalone DVD player using the HDMI - to- DVI cable and got a normal image thru the monitors DVI port. It was Phillps 5990 upconverting to 1080P.
How can the DVI port on the monitor work for the DVD player but not with a conputer hooked to it. FYI - the monitor went bad while I was loading Windows 7 on a backup computer. The install seemed to go well,but soon after finishing the install it stopped displaying 1440 x 900 and started reverting to base VGA resolution,then stopped working thru the DVI port.
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 6 of 6
Thread
-
-
How have you set the port in your computer display settings? Monitors are limited to the resolutions listed in the manual.
I doubt this is a hardware issue. It is most likeley a computer settings issue.Recommends: Kiva.org - Loans that change lives.
http://www.kiva.org/about -
I can set it to the default 1440 x 900 thru the standard VGA port but when I hook it up via DVI I get no image at all so setting to default on the DVI port won't work.
-
Originally Posted by wulf109
Try connecting the computer to a different monitor with DVI-D. The problem is either the computer display card or the DVI-D to DVI-D cable you are using.Recommends: Kiva.org - Loans that change lives.
http://www.kiva.org/about -
The monitor is a Hanns-g HW191D,native resolution 1440 x 900. I setup W7 using an Nvidia 6200 which is when the problem developed. I switched to an ATI X300 card,problem persisted. Tred 3 different DVI cables. I then hooked up a diffent monitor and it worked normally. The new monitor was an Asus 1680 x 1050 unit,it booted up in 1440 x 900 but I simply reset it to 1680 x 1050 and it's working just fine with W7 comuter. I then hooked up one of my primary computers to the Hanns-g monitor and I was back to no image thru DVI. That computer has an ATI HD3400 video card which is 1920 x 1080 capable.
-
Originally Posted by wulf109
Time to call Hanns-G support.
User reviews aren't good.
http://www.amazon.com/Hanns-G-19Wide-Hb191Dpb-Dvi-D-Hdcp/product-reviews/B0013XVWPA/re...owViewpoints=1Recommends: Kiva.org - Loans that change lives.
http://www.kiva.org/about
Similar Threads
-
Dvi not working on acer monitor
By kruzing in forum ComputerReplies: 4Last Post: 2nd Sep 2012, 11:57 -
LED MONITOR - HDMI to DVI-D cable, HDMI media player not working?
By krishn in forum DVB / IPTVReplies: 16Last Post: 25th Feb 2012, 16:20 -
Can I interface my VGA monitor through a HDMI-DVI-D cable via DVI-D to VGA?
By vinny88 in forum Authoring (DVD)Replies: 4Last Post: 14th Oct 2011, 08:31 -
Computer DVI output to TV DVI input
By superdud1400 in forum DVB / IPTVReplies: 12Last Post: 13th Jul 2008, 09:44 -
Monitor? - DVI-D vs D-Sub (normal) hook up?
By videobread in forum ComputerReplies: 2Last Post: 6th Aug 2007, 18:34