+ Reply to Thread
Results 1 to 10 of 10
Thread
  1. Member
    Join Date: Jun 2009
    Location: Jordan
    hi all

    i capture some videos with my sony-hdr-sr11 and LP quality

    picture is very good(1920-1080) and each hour takes about 1gb and 500mb

    the format on cam hard disk is MTS

    i do some effects an editing and cutting on the video

    the proplem is

    when i reender the video what is the best setting to use to keep same quality as the original and same size

    is it avi??

    or mpg??

    or other??

    and how can i use avi with HD setting ??

    and can some one help me how to use H264 setting???

    sorry 4 bothering but im tierd of trying and using alot of programs.....sony vegas..ulead....magix...etc

    and thaaaaaaanks alot
    Quote Quote  

  2. Member
    Join Date: Jun 2009
    Location: Jordan
    waiting.............
    Quote Quote  

  3. Always Watching guns1inger's Avatar
    Join Date: Apr 2004
    Location: Miskatonic U
    Use mediainfo to find out exactly how your current video is compressed, and use similar settings.

    The only codec that will compete with what you have is . . . . what you have - H.264 and, maybe VC-1. H,264 can be encoded into several different containers, although some have wider support than others.

    However you will lose some quality by doing this, as you are compressing already lossy compressed footage with a lossy codec. This will, inevitably, have an impact. How noticeable it is will only be shown by trying.

    As for size, the universal equation for digital video is

    Filesize = Running Time X Bitrate

    This holds true regardless of codec, resolution or video content.
    Read my blogs here and here. Change England's Libel Laws - Sign Here
    Quote Quote  

  4. Member
    Join Date: Jun 2009
    Location: Jordan
    thanks alot guns1inger

    mediainfo is a very useful tool

    i have it but gorgot to use it

    thaaaaaaanks alot
    Quote Quote  

  5. Member edDV's Avatar
    Join Date: Mar 2004
    Location: Northern California, USA
    Originally Posted by khalid81
    hi all

    i capture some videos with my sony-hdr-sr11 and LP quality

    picture is very good(1920-1080) and each hour takes about 1gb and 500mb

    the format on cam hard disk is MTS
    Eye of beholder but my eyes wouldn't agree.

    You are recording at too low a rate.


    Originally Posted by khalid81
    i do some effects an editing and cutting on the video

    the proplem is

    when i reender the video what is the best setting to use to keep same quality as the original and same size
    First you should have recorded at a higher rate if you intend to add effects or edit on other than I frame cuts.

    Second, effects/editing will be lossy so expect a drop in quality.

    Try this project again at highest recording rate FH? and then compare the end result.
    http://www.sonystyle.com/webapp/wcs/...specifications
    Recommends: Kiva.org - Loans that change lives.
    http://www.kiva.org/about
    Quote Quote  

  6. Member edDV's Avatar
    Join Date: Mar 2004
    Location: Northern California, USA
    waiting.............
    Recommends: Kiva.org - Loans that change lives.
    http://www.kiva.org/about
    Quote Quote  

  7. eddv i don't think the op has a clue. the spec on that cam's lowest bitrate HD setting requires about 3B/hr. the only thing he could be shooting in is standard def. long play mode at the rate he claims. either way a waste of 1920x1080 or 720x480. not nearly enough bits/sec for either.
    Quote Quote  

  8. Member edDV's Avatar
    Join Date: Mar 2004
    Location: Northern California, USA
    From the Sony link, there is a " LP = 22 hours and 50 min." to 60GB HDD mode at 1920x1080i or ~7Mb/s.

    This is absurd for a camcorder.
    Recommends: Kiva.org - Loans that change lives.
    http://www.kiva.org/about
    Quote Quote  

  9. hehe - almost good enough for youtube
    Quote Quote  

  10. Member
    Join Date: Jun 2009
    Location: Jordan
    thanks alot guys

    i ll try to capture eith FH and then do effects and save the file

    i think this way will keep the picture with good quality

    thanks again
    Quote Quote  




Similar Threads

  1. Replies: 2
    Last Post: 24th Nov 2004, 09:56
  2. 4 hour video quality.
    By pepegot1 in forum DVD & Blu-ray Recorders
    Replies: 4
    Last Post: 31st Jul 2004, 13:11
  3. Quality of 1 hour vs 2 hour DV to DVD creation?
    By jay24k in forum Camcorders (DV/HDV/AVCHD)
    Replies: 4
    Last Post: 28th Apr 2004, 02:16
  4. Replies: 1
    Last Post: 19th Dec 2003, 11:23
  5. Creating a video DVD, with 4 MPEG2 files 1gb each one.
    By Dante_das in forum Newbie / General discussions
    Replies: 1
    Last Post: 19th Dec 2003, 11:07
About   Advertise   Forum   RSS Feeds   Statistics   Tools