Hello,
I have a Popcorn Hour PCH-A110. From time to time, one of my encodes will not play on my PCH-A110. Take this one in particular, Nim's Island. Sounds is fine, but no Picture
I have tried re-muxing it in mkvmergeGUI (latest rev) and even moving the stream IDs up or down... nothing.
I demuxed it and Re-muxed it with tsmuxeRGUI to an m2ts file, this allows me to play it back both audio and video but the audio is badly out of sync ???
Anyhow, I am now trying .ts and see if that works.
Meanwhile, can anyone shed some light on this? Here isthe mediainfo on the original MKV
BTW The file plays fine in VLC and WMP11 with Haali Splitter and ffdshow latest.
I do get this error when trying to re-mux in tsmuxerGUI directly from the original MKV file
When I extract the elementary streams and mux them I do not get the error but I do get the unsynced fileCode:Reading buffer overflow. Possible container streams are not syncronized. Please, verify stream fps. File name: N:\Movies\Adventure\Nim's Island [2008] BLU-RAY.mkv
Thank you in advance for any tips.
Code:General Complete name : N:\Movies\Adventure\Nim's Island [2008] BLU-RAY.mkv Format : Matroska File size : 7.42 GiB Duration : 1h 32mn Overall bit rate : 11.5 Mbps Movie name : Nim's Island (2008) Encoded date : UTC 2009-03-22 16:41:01 Writing application : mkvmerge v2.5.1 ('He Wasn't There') built on Feb 22 2009 18:19:47 Writing library : libebml v0.7.7 + libmatroska v0.8.1 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : High@L4.1 Format settings, CABAC : Yes Format settings, ReFrames : 5 frames Muxing mode : Container profile=Unknown@4.1 Codec ID : V_MPEG4/ISO/AVC Duration : 1h 32mn Bit rate : 10.3 Mbps Nominal bit rate : 10.3 Mbps Width : 1 920 pixels Height : 800 pixels Display aspect ratio : 2.400 Frame rate : 25.000 fps Original frame rate : 23.976 fps Resolution : 24 bits Colorimetry : 4:2:0 Scan type : Progressive Bits/(Pixel*Frame) : 0.268 Writing library : x264 core 60 r920 32f09c4 Encoding settings : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=5 / brdo=0 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=0 / threads=6 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=1 / wpredb=1 / bime=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=2pass / bitrate=10328 / ratetol=1.0 / rceq='blurCplx^(1-qComp)' / qcomp=1.00 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=2:1.00 Audio ID : 2 Format : DTS Format/Info : Digital Theater Systems Codec ID : A_DTS Duration : 1h 32mn Bit rate mode : Constant Bit rate : 768 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Surround: L R, LFE Sampling rate : 48.0 KHz Resolution : 24 bits Language : English
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 4 of 4
Thread
-
Manny
-
Here is the media nfo for the m2ts remux I did from the elementary streams.
This file plays and I see both vide and audio... but, the audio is badly out of sync
Code:General ID : 1 Complete name : n:\Nim's Island [2008] BLU-RAY_Track1 REMUX.m2ts Format : BDAV Format/Info : BluRay Video File size : 5.89 GiB Duration : 1h 8mn Overall bit rate : 12.3 Mbps Maximum Overall bit rate : 35.5 Mbps Video ID : 4113 (0x1011) Menu ID : 1 (0x1) Format : AVC Format/Info : Advanced Video Codec Format profile : High@L4.1 Format settings, CABAC : Yes Format settings, ReFrames : 5 frames Duration : 1h 8mn Bit rate : 11.0 Mbps Nominal bit rate : 10.3 Mbps Width : 1 920 pixels Height : 800 pixels Display aspect ratio : 2.400 Frame rate : 23.976 fps Resolution : 24 bits Colorimetry : 4:2:0 Scan type : Progressive Bits/(Pixel*Frame) : 0.299 Writing library : x264 core 60 r920 32f09c4 Encoding settings : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=5 / brdo=0 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=0 / threads=6 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=1 / wpredb=1 / bime=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=2pass / bitrate=10328 / ratetol=1.0 / rceq='blurCplx^(1-qComp)' / qcomp=1.00 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=2:1.0 Audio ID : 4352 (0x1100) Menu ID : 1 (0x1) Format : DTS Format/Info : Digital Theater Systems Duration : 1h 8mn Bit rate mode : Constant Bit rate : 768 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Surround: L R, LFE Sampling rate : 48.0 KHz Resolution : 24 bits
Manny -
Frame rate : 25.000 fps
Original frame rate : 23.976 fps
You can override the fps in tsmuxer. Just highlight the video track and use the changefps box -
Thanks for the response... I had actually figured this out on my own a little while ago so I am glad to have reassurance I was right.
So I tried just like you said... and no matter what, the resulting MKV kept the darn 25fps and the original fps. So it would play fine in VLC but PCH would barf on the video.
I tried many a variance on the theme of remuxing in both mkvmerge and tsmuxer with every possible combination of fps/rate/etc.
In the end I fixed it by putting the audio stream through eac3to and reducing the fps on the audio track to 23.976 from 25. I asssumed it was too fast because the delay was good at the beginning but got progressively worse at the end. All my .ts and m2ts files played fine (the video) but the audio lagged. So I assumed the audio was at the wrong rate.
Setting the video to 25 fps did NOT help at all.
So, doing the eac3to down to 23.976 fps did the trick. The file is now a m2ts file perfectly synced.
A test mkv also worked out
Cheers and thanksManny
Similar Threads
-
MKV guide, Play MKV, MKV to AVI, MKV to DVD, MKV to MP4, MKV to Blu-ray
By Baldrick in forum Newbie / General discussionsReplies: 55Last Post: 29th Jun 2012, 11:19 -
Unable to play certain mkv files on Viewsonic Media Player(VMP70)
By bappida69 in forum Newbie / General discussionsReplies: 5Last Post: 18th Oct 2011, 16:40 -
Unable to play MPEG-4 files
By rama_m in forum Software PlayingReplies: 10Last Post: 22nd Aug 2009, 09:12 -
Unable to play avi files
By jayee in forum Newbie / General discussionsReplies: 1Last Post: 20th Aug 2009, 07:45 -
unable to trim some 720p mkv files
By shockaholic in forum EditingReplies: 0Last Post: 26th Nov 2008, 15:33