AVI -> DVD but no .MPV?

[Kiona]

Hi,

It's bin a while but i'm back . Maybe someone can help me with this problem.

I'm trying to encode an .avi file to DVD, but there is no .mpv appearing.
Steps:
Summary: AVI to DVD mpeg2enc
Filters: VOB subtitles, Load sub .srt
Options: no vcd scan, letterbox, Decode with mplayer, Altivec, Bicubic

encode.

Process info;

Encoding started on Fri Sep 5 11:19:29 CEST 2008
/Users/admin/Desktop/49/49.avi.ff/
/Applications/ffmpegX.app//Contents/Resources/mencvcdX: line 207: /Library/Application Support/ffmpegX/mpeg2enc: Malformed Mach-o file
-f 5 -b 3200 -q 3 -B 260 -V 230 -a 3
-F 4
FIXME:Hardenabling SSE and SSE2 without detection
MPlayer dev-CVS-060307-04:23-4.0.1 (C) 2000-2006 MPlayer Team
Mac OSX static build for ffmpegX
CPU: Intel Pentium III Katmai/Pentium III Xeon Tanner (Family: 6, Stepping: 6)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
INFO: [yuvscaler] yuvscaler (version 1.7.0) is a general scaling utility for yuv frames
INFO: [yuvscaler] (C) 2001-2002 Xavier Biquard <xbiquard@free.fr>
INFO: [yuvscaler] yuvscaler -h for help, or man yuvscaler
get_path('codecs.conf') -> '/Users/admin/.mplayer/codecs.conf'
Reading /Users/admin/.mplayer/codecs.conf: Can't open '/Users/admin/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
CommandLine: '-noframedrop' '-vo' 'yuv4mpeg' '-ao' 'pcm:waveheader' '-v' '-osdlevel' '0' '/Users/admin/Desktop/49/49.avi' '-aid' '1' '-sid' '1'
get_path('font/font.desc') -> '/Users/admin/.mplayer/font/font.desc'
font: can't open file: /Users/admin/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Darwin accurate timing
Terminal type `unknown' is not defined.
get_path('input.conf') -> '/Users/admin/.mplayer/input.conf'
Can't open input config file /Users/admin/.mplayer/input.conf: No such file or directory
Can't open input config file /usr/local/etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config
get_path('49.avi.conf') -> '/Users/admin/.mplayer/49.avi.conf'
Playing /Users/admin/Desktop/49/49.avi.
get_path('sub/') -> '/Users/admin/.mplayer/sub/'
[file] File size is 729484786 bytes
STREAM: [file] /Users/admin/Desktop/49/49.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
AVI file format detected.
list_end=0x146
======= AVI Header =======
us/frame: 40000 (fps=25.000)
max bytes/sec: 650000
padding: 0
MainAVIHeader.dwFlags: (2064) HAS_INDEX TRUST_CKTYPE
frames total: 164529 initial: 0
streams: 2
Suggested BufferSize: 864000
Size: 720 x 400
==========================
list_end=0xD4
==> Found video stream: 0
====== STREAM Header =====
Type: vids FCC: xvid (64697678)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 1000000/40000 = 25.000
Start: 0 Len: 164529
Suggested BufferSize: 1152000
Quality -1
Sample size: 0
==========================
Found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 720
biHeight 400
biPlanes 1
biBitCount 24
biCompression 1145656920='XVID'
biSizeImage 864000
===========================
Regenerating keyframe table for MPEG4 video
list_end=0x146
==> Found audio stream: 1
====== STREAM Header =====
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 20000/1 = 20000.000
Start: 0 Len: 274191
Suggested BufferSize: 0
Quality -1
Sample size: 1
====================
Found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 20000
Block align: 1
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=8640
mp3.nFramesPerBlock=1
mp3.nCodecDelay=1393
===========================
list_end=0x2B0FF1EA
Found movie at 0x2800 - 0x2B0FF1EA
Reading INDEX block, 438720 chunks for 164529 frames (fpos=722465266)
AVI index offset: 0x27FC (movi=0x2800 idx0=0x4 idx1=0xC46)
looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag
[mpeg4 @ 0x7f4b2c]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag
INFO: [yuvscaler] SVCD output format requested in PAL/SECAM norm
INFO: [yuvscaler] input: frame size: 720x400 pixels (432000 bytes)
INFO: [yuvscaler] input: frame rate: 25/1 fps (~25.000000)
INFO: [yuvscaler] input: interlace: none/progressive
ideo ID = 0
Auto-selected AVI audio ID = 1
AVI: Searching for audio stream (id:1)
XXX initial v_pts=0.040 a_pos=0 (0.000)
AVI video size=587114367 (164529) audio size=131611678 (131611678)
VIDEO: [XVID] 720x400 24bpp 25.000 fps 713.7 kbps (87.1 kbyte/s)
[V] filefmt:3 fourcc:0x44495658 size:720x400 fps:25.00 ftime:=0.0400
get_path('sub/') -> '/Users/admin/.mplayer/sub/'
SUB: Detected subtitle file format: subviewer
SUB: Read 767 subtitles.
tio: ?
INFO: [yuvscaler] from 720x400, take 720x400+0+0, NOT_INTERLACED/PROGRESSIVE
INFO: [yuvscaler] scale to 720x300, 720x400 being displayed, NOT_INTERLACED/PROGRESSIVE
INFO: [yuvscaler] Scaling uses the RESAMPLE algorithm,
INFO: [yuvscaler] without line switching
INFO: [yuvscaler] without time forwarding
INFO: [yuvscaler] Without luminance correction
INFO: [yuvscaler] Without chrominance correction
INFO: [yuvscaler] black lines: 50 above and 50 under
9.srt
================================================== ========================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: using generic C decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 48000 Hz 160 kbit Joint-Stereo, BPF: 480
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 160.0 kbit/10.42% (ratio: 20000->192000)
ack columns: 0 left and 0 right
INFO: [yuvscaler] frame rate: 25.000 fps
INFO: [yuvscaler] Scaling ratio for width is 1 to 1
INFO: [yuvscaler] and is 4 to 3 for height
INFO: [yuvscaler] Specific downscaling routing number 7
MPlayer interrupted by signal 13 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
mp3lib (mp3lib MPEG layer-2, layer-3)
================================================== ========================
Using (default) progressive frame mode.============================================= =============================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
================================================== ========================
the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
INFO: Opened WAV file, freq = 48000 Hz, channels = 2, bits = 16
INFO: format = 0x1, audio length = 65536 bytes
INFO: slots/frame = 672
INFO: frac SpF=0.000, tot bitrate=224 kbps, s freq=48.0 kHz
INFO: System is big endian
0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[AO PCM] File: audiodump.wav (WAVE)
PCM: Samplerate: 48000Hz Channels: Stereo Format s16le
[AO PCM] Info: Faster dumping is achieved with -vc null -vo null
[AO PCM] Info: To write WAVE files use -ao pcm:waveheader (default).
AO: [pcm] 48000Hz 2ch s16le (2 bytes per sample)
AO: Description: RAW PCM/WAVE file writer audio output
AO: Author: Atmosfear
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
Starting playback...
[ffmpeg] aspect_ratio: 1.800000
VDec: vo config request - 720 x 400 (preferred colorspace: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
VO Config (720x400->720x400,flags=0,'MPlayer',0x32315659)
VO: [yuv4mpeg] 720x400 => 720x400 Planar YV12
VO: Description: yuv4mpeg output for mjpegtools
VO: Author: Robert Kesterson <robertk@robertk.com>
*** [vo] Allocating (slices) mp_image_t, 720x400x12bpp YUV planar, 432000 bytes
Uninit audio filters...
[libaf] Removing filter dummy
uninit audio: mp3lib
uninit video: ffmpeg
wait, encoding to mp2 audio with mp2enc...
INFO: Avg slots/frame = inf; b/smp = inf; br = inf kbps
INFO: Encoding with psychoacoustic model 2 is finished
INFO: The MPEG encoded output file name is "/Users/admin/Desktop/49/49.avi.ff.mpa"
INFO: [mplex] mplex version 1.9.0 (2.2.7 $Date: 2006/02/01 22:23:01 $)
**ERROR: [mplex] Unable to open file /Users/admin/Desktop/49/49.avi.ff.mpv for reading.


Its on a new mac pro. With my Imac i don't have any problems. What i'm i doing wrong?

Thanks and greets.

[Case]

Process info;
Encoding started on Fri Sep 5 11:19:29 CEST 2008
/Users/admin/Desktop/49/49.avi.ff/
/Applications/ffmpegX.app//Contents/Resources/mencvcdX: line 207: /Library/Application Support/ffmpegX/mpeg2enc: Malformed Mach-o file

The encoder engine, mpeg2enc, seems broken (malformed), hence no video encoding is taking place. Try downloading and installing it again. If it still fails, try this copy instead; it seems to have solved it for some users with continuous mpeg2enc problems.

[Kiona]

Thanks, I tried for many times to install de mpeg2codec. I'm gonna try the copy you send me the link of. I'll let you know if it worked.

[Kiona]

Hello,

already a while ago.

I tried it and downloaded your link, but still the same problem. Some other suggestions what i'm doing Wrong?

Thanks

[tomlee59]

Could you perhaps describe in agonizing detail precisely what steps you are following?

[Kiona]

Summary
Source format is .avi
target format: DVD mpeg2enc

Video
autosize: DVD

Filters
Load subs: .srt file

Options
Decode with mplayer

These are the steps i take to encode.

[tomlee59]

I was referring to your installation of mpeg2enc. Isn't that the problem?

[Kiona]

Oops sorry,

I'm going to:
Install binaries
select mpeg2enc -> locate (on my desktop)
enter my password
then install

that's it.

[tomlee59]

Missing from the steps you listed (I asked for excruciating detail, so I am assuming that those steps are truly all of the steps you followed) is an unzipping of the mpeg2enc archive. A zipfile is not a binary; it is a compressed archive. You must unzip first, and the unzipped result is what you will then point to. So, if you have been persistently omitting this important step, that would explain why you have had trouble all along.

[Kiona]

I'm sorry, yes i unzipped the file. That go's automaticly.

I'm gonna try it again but then the hard way.