When I first joined video help I was under a different name, since lost password, created new member account, then found my other user name, kidmegabit. The thread below was one where several members were trying to help me set up my new card with satellite.
https://forum.videohelp.com/topic276786-30.html
Now though my setup has changed. I still have the Hauppauge card, but my tv now has cable instead of satellite. What is the easiest, and most simple way to set up my system now?
And my self built computer specs have changed as I'm running Vista Ultimate and XP. If you need my specs I can post them next time.
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 18 of 18
Thread
-
-
For analog cable channels you can run cable coax directly to the PVR-150. That will allow the internal tuner to tune all unprotected analog channels.
For protected content (HBO, Cinemax, etc) or digital channels you'll have to run s-video from the cable box to the PVR-150. -
Sorry for not making this more indepth, but I need help connecting the card to my VCR/DVD so I can capture VHS tapes. I have an Emerson VCR/DVD player, this equipment has Composite for coneecting to computer card, or it has coaxil, which the card also has.
I don't care about capturing tv shows. I have some VHS, Home movies, I want to revert to DVD. -
Run composite video (RCA connector, usually yellow) from the VCR output to the PVR-150:
I don't remember if the PVR-150 has a RCA or stereo pin-plug for audio. You'll need either this:
Or a regular RCA audio cable with the red and white connectors at both end. If the PVR-150 has the red and white RCA connectors you can use a single cable that has both video and audio:
-
PVR 150 has stereo pin plug for audio. And where would I find both cables in more than 6 ft? My setup is about 8 foot from the computer.
-
You can get 10 to 15 foot cables from most places that sell them.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812196037
http://www.newegg.com/Product/Product.aspx?Item=N82E16882021058
You can get cables like this at any local electronics store of Radio Shack. Don't let them sell on you $100 Monster cables. For VHS at 10 to 15 feet you don't need expensive cables. -
Thanks. I saw that adapter at Radio Shack but when I asked about it they tried to sell me some other cables, that weren't long enough and were even the wrong type. I think I'll order them from newegg because I have my computer repair business listed with them and they don't charge me shipping. When I tried this setup before I had a y-splitter for the audio and it didn't look anything like that adapter, the audio wouldn't sync with the video either. But this adapter looks like it would work much better. Thanks so much for your help.
-
I always keep a bunch of these around...
a few of these...
a bunch of these...
a bunch of these...
a bunch of these...
and a few of these...
I have a few high quality monster cables for my entertainment center but I bought a 15 foot set of A/V cables like monster cables at a dollar general store or something like that for about 10 bucks and they work fine when I need to go between rooms. -
I bought RCA composite cables, and the adapter for the sound from Radio Shack (finally found a young girl who knew what I was looking for), that jagabo suggested.
Connected everything this morning.......no capture with my wintv software. Don't know what I did wrong or if the vcr/dvd player is played up. TV has nothing except Coaxil hookup.
Here's how the cables are connected. Coaxil to vcr/dvd.....coaxil to tv......cables to composite out to capture card with audio adapter to stereo port. Using WinTV or WinAVI neither will pick up tv or vcr. -
The PVR-150 can capture from the internal tuner (cable coax), the s-video port, or the composite video port. Make sure you have the right input selected in WinTV2000.
I wonder if your TV doesn't convert the cable coax input to it's composite output. Try attaching the VCR output directly to the PVR-150.
By the way, by using coax everywhere you are getting less picture quality. Use of composite or s-video will give you better quality. -
The TV has no other connectors, no av, no composite, no component, no S-Video, just coaxil.
I wonder if your TV doesn't convert the cable coax input to it's composite output. Try attaching the VCR output directly to the PVR-150.
I have setup the winTV2000 for Cable, NTSC-443, and location USA. -
Originally Posted by magicfingers
Originally Posted by magicfingers
-
First the vcr is connected to the PVR-150 via composite video with the audio adapter. The TV has no other connectors. It only has coaxil.
Having explained that, this means, that the TV is connected to the VCR via coaxil. What I explained above, is how the card should be reading from the VCR, but isn't. And my WinTV is the newest model, not like the one you have and there are no green buttons anywhere.
-
I misunderstood what you said earlier: "Coaxil to vcr/dvd.....coaxil to tv......cables to composite out to capture card". I thought you meant the composite cable was going from the TV to the PVR (many TVs have a "monitor out" which allows you to record whatever you see on the TV, I thought you were using that). I guess you have the composite and audio cables going directly from the VCR to the PVR.
That version of WinTV has to have the composite input assigned to a channel number. I don't remember the exact procedure but you have to go to the channel manager and add a channel. -
Yes, the composite cables are going from the VCR to the PVR. My own tv I had when I asked this question before, the one in the link above, had component, composite and S-Video connections on the back of it. This is an older tv that belongs to my nephew and doesn't have any of those connectors on the back.
Since the channel that I use to see VHS tapes is TV channel 3, is this the channel I need to add? -
The composite port can be mapped to any unused channel in WinTV2000. I would use an otherwise unused channel number, like 1.
-
I tried, both 2 and 1, and nothing. I finally decided I need a newer Tv and will put this operatin off until I can afford to purchase a better TV and VCR/DVD player. I'm thinking maybe a different card too. This one never did work like it was supposed to do. Thanks for your help though, I appreciate all you did.
-
magicfingers
You need to add composite by click on Menu button you want go to Suite Manager.
Select the Sources tab and highlight the Composite or S-video source.
Select the rigth video format commonly used in Europe is Pal-BGHIDK or in the USA is NTSC-M, type a name for the channel and a description and click on Save and Close.
Selecting the composite or s-video channel in the channel list
To select the Video Channel that you created right click with the mouse button on the TV window and select the channel list. You should see you the channel name you just created at the bottom of the channel list.
Similar Threads
-
Hauppauge PVR-150 Hue and Saturation adjustment
By Spektre in forum CapturingReplies: 3Last Post: 15th Jun 2011, 10:09 -
capture VHS with Hauppauge PVR 150?
By shun in forum CapturingReplies: 13Last Post: 24th Jul 2010, 18:11 -
Hauppauge PVR 150 compatibility with my OS
By GangstaRap in forum CapturingReplies: 11Last Post: 14th Mar 2008, 10:03 -
hauppauge pvr 150: Need REAL software to record
By SignedupGuest in forum CapturingReplies: 16Last Post: 19th Feb 2008, 12:40 -
Hauppauge WinTV PVR-150 ($60) vs. ATI TV Tuner 650 ($100)
By RoganSarine in forum CapturingReplies: 2Last Post: 13th Dec 2007, 02:48