Miro DC10 /DC10+ and fedora

[bmw524]

I have a DC10 with Fedora 8 and a DC10+ with a Fedora 9.
Logging in "root"

[root@wiking Nicolas]# caminfo
Detected 2 Video4Linux devices.
Device node : /dev/video0
Name of device : "BT878 video (Pinnacle PCTV Stud"
Minimum size : 48x32
Current size : 0x0
Maximum size : 924x576
Video inputs : 3
Input 0
Name : "Television"
Type : TV
Audio : no
Tuners : 1
Name : "Television"
Frequency range : 44.00-958.00 MHz
Current frequency: -0.00 MHz
Norm setting : yes
Input 1
Name : "Composite1"
Type : Camera
Audio : no
Tuners : 0
Input 2
Name : "S-Video"
Type : Camera
Audio : no
Tuners : 0
Audio inputs : 0

Device node : /dev/video1
Name of device : "DC10(old)[0]"
Minimum size : 32x24
Current size : 0x0
Maximum size : 768x576
Video inputs : 3
Input 0
Name : "Composite"
Type : Camera
Audio : no
Tuners : 0
Input 1
Name : "S-Video"
Type : Camera
Audio : no
Tuners : 0
Input 2
Name : "Internal/comp"
Type : Camera
Audio : no
Tuners : 0
Audio inputs : 0

All it's all right

But camstream with DC10old[0] :

[root@wiking Nicolas]# camstream
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
CCamWindow::CCamWindow()
CWebCamViewer::CWebCamViewer(0x93af300, 0x0)
CVideoDevice::Init()
Using mmap(), VMBuf.size = 262144
CVideoDevice::Init(): mmap() failed (22). Falling back to non-mmap()ed mode.
Allocating own buffer.
Trying to find video options for DC10(old)[0]:/dev/video1
searching DC10(old)[0]
CSnapshotSettingsDlg::CSnapshotSettingsDlg(...)
QFont:etRawName(): Invalid XLFD: "system"
CVideoSettingsDlg::SizeChanged(0x0)
CVideoSettingsDlg::FramerateChanged(10)
CCamPanel::SetSize(0x0)
CCamPanel::SetImageSize(0x0)
CCamPanel::SetVisibleSize(0x0)
QPainter::begin: Cannot paint null pixmap
QPainter:etPen: Will be reset by begin()
QPainter:etBrush: Will be reset by begin()
QPainter:etBrush: Will be reset by begin()
QPainter:etPen: Will be reset by begin()
QPainter:etPen: Will be reset by begin()
QPainter::end: Missing begin() or begin() failed
CCamPanel::SetSize(0x0)
CCamPanel::SetImageSize(0x0)
CCamPanel::SetVisibleSize(0x0)
RecalcTotalViewSize: resize viewport(0x0)
EnableRGB: +
CVideoDevice::SetPalette picked palette 5 [rgb32]
CVideoDevice::CreateImagesRGB()
using pre-allocated memory
CVideoDevice::StartCapture() go!
CVideoDevice::LoadImage() Error loading image; errorcode=-22

EnableRGB: -
CVideoDevice::ResetImagesRGB()
CVideoDevice::SetPalette picked palette 0 []
CVideoDevice::StopCapture() halt!
CWebCamViewer::~CWebCamViewer()
CWebCamViewer::StopTimeSnap()
CWebCamViewer::StopFTP()
CCamWindow::~CCamWindow()

Camstream is lauched, but I have a opened window and it's written the following message : "DEVICE ERROR The device experienced an error -22 (Argument invalid). The window will be closed"
I don't understand what's wrong...

I have the same problem with a DC10+ under Fedora 9.
(kernels are 2.6.25)

thanks
Nicolas

[bmw524]

It works under Xubuntu (Hardy) with Xawtv. But not with camstream ...
Why does it under debian base OS and not under Fedora??

[bmw524]

Now it works on fedora with xawtv